The answer to your selected question is shown below.
Please use the Search tool or the menus on the right to find and select more questions and answers. If you think our response isn't clear, it would be very helpful if you could contact us with the issue so that we can improve this section of our web-site.
Q:What are the order size references for the Seceuroglide Roller doors?
The ordering sizes for all the Seceuroglide insulated roller doors are the ‘Overall Width’ of the door curtain plus the side guides chosen. For example if you want a door opening size of 2250mm as this is your brickwork width and you are installing behind the piers, you add to this size the guides which are 75mm on a standard door so the ‘Overall Width’ becomes 2250 + 75 +75 = 2400mm.
The height is ordered from the ‘Guide Height’ without the endplates and curtain roll included so is the height to the top of the guides. For example you have a lintel height of 2150mm and again you are installing behind the brickwork opening (inside the garage), assuming you have sufficient internal headroom you would order the door as 2150mm ‘Order Height’ and the standard Seceuroglide door would come with 300mm endplates (with or without the optional hood cover) so your overall height would be 2450mm and that is what would be required internally from the floor to the ceiling as a minimum.
See our DIY installation guide >
The drive through height of most mainstream insulated roller doors will always be about 55mm lower than the guide height so be aware of this in your calculations. If you have more internal headroom than required then considr adding an extra 55mm on to the ordering height to overcome this slight hangdown of the bottom slat.
