The Hormann MZ Thermo46 multi-purpose doors are more than just extremely robust. Thanks to the thermal break, they offer up to 49% better thermal insulation and reduce the risk of condensation forming in heated rooms in contrast to a steel door. They are available with or without glazing as well as in numerous colours and decor surfaces.
The Hormann MZ Steel Multi Purpose Doors with thick rebate, sheet thickness 0.6-.8mm.
The TPS 051S door has 3 two part guide rollers (180mm), three way adjustable with cover caps (aluminium/stainless steel look).
> Aluminium frame for fitting to brickwork and concrete.
> Mortice lock (single locking) prepared for profile cylinder and 3 keys, without emergency and hazard function.
> Ordering size = overall frame dimensions (nominal size).
> Steel door leaf overlapping the frame, with thermal break, exterior and interior in same colour.
> Plastic glazing frame in door frame colour.
> Lever handle set (lever/lever) made of plastic, black, rose escutcheon.
> Double pane insulated glazing, 28mm thick, exterior laminated safety glass, interior Satinato single-pane safety glass.
The Hormann insulated personnel doors are available as hinged on left or right hand side (looking from inside). Opening inwards only.
Complete with A2 Frame as standard.
Colour Options
RAL 1015 Light Ivory
RAL 3000 Flame Red
RAL 3003 Ruby Red
RAL 510 Gentian Blue
RAL 5014 Pigeon Blue
RAL 6005 Moss Green
RAL 7016 Anthracite Grey
RAL 7035 Light Grey
RAL 7040 Window Grey
RAL 8003 Clay Brown
RAL 8028 Terra Brown
RAL 9001 Cream
RAL 9002 Grey White
RAL 9006 White Aluminium
RAL 9007 Grey Aluminium
Decor Colour Options
Golden Oak
Dark Oak
Night Oak
Winchester Oak
Titan Metallic CH 703
The Hormann MZ Thermo46 multi-purpose doors will help you reduce heating losses permanently. The door leaf with PU rigid foam infill, frame and threshold all come with a thermal break. This and the all-round
double seals on all four sides make sure the door is perfectly sealed and improves thermal insulation by up to 49 % compared to a conventional multipurpose door.
Stability and functionality
The MZ Thermo46 is exceptionally stable and robust thanks to the fully filled door leaf.
The door can be optimally adjusted using the threeway adjustable guide rollers.
With or without glazing
On request, the MZ Thermo46 also comes with glazing to let daylight into your workshop or hobby room.
The glazed versions also offer excellent thermal insulation on the interior and exterior thanks to double insulated safety glass.
Ready-to-fit door set
Door leaf and frame with thermal break, galvanized and painted in Traffic white (similar to RAL 9016).
Single-leaf
Thermally insulated
TPS 011: UD = 1.1 W/ (m²·K)
TPS 021: UD = 1.4 W/ (m²·K)
TPS 051: UD = 1.6 W/ (m²·K)
TPS 051 glazing
Double insulated glazing
(28 mm) with a U-value of up to approx. 1.4 W/ (m²·K), with synthetic glazing frame.
Warranty
Hörmann products are manufactured to the highest quality standards and leave our factory only after rigorous quality testing. However, if you should have grounds for complaint, this section tells you what our door warranty offers, and how to go about making your claim.
In the unlikely event of a warranty claim becoming necessary, please contact the dealer or distributor who originally supplied your garage door. Your dealer should then supply details of the claim, together with a copy of the warranty card provided with the door and proof of purchase to the Product Services Department at Hörmann (UK) Ltd. To enable your claim under warranty to be processed as quickly as possible, you should provide the following details:
1 Your name, address and telephone number
2 Original invoice with date of purchase
3 Product description/door type and product number
4 Description of defect
An assessment of the claim will then be made. This may require Hörmann to inspect the product in-situ. In the event that there is no legitimate warranty claim under the terms specified herein, you may be liable for the costs of the inspection visit. We strongly recommend that you take note of the care and usage instructions displayed on the stickers on the back of your garage door, and on the page opposite, and that you follow these instructions throughout.
Hörmann (UK) Ltd Garage Door Warranty
Warranty Period The purchaser is granted a warranty covering the safe and reliable function of the Hörmann garage door for a period of 10 years from the date of purchase. A 5 year warranty applies to springs, wire cables, track rollers, hinges and guide rollers. The warranty period for replacement parts is 6 months or to the end of the current warranty period, whichever is longer. In the case of foilcoated timber-effect, a warranty of 5 years is granted, for timber and GRP doors a warranty of 2 years is granted on the door panels alone under the terms and conditions specified herein. The door mechanism and steel frame (if applicable) is covered by the 10 year warranty period.
Requirements
Warranty claims are only applicable in the country where the garage door was purchased. The product must have been purchased through our authorised distribution channels. The warranty only covers damage to the contract object. The fully completed warranty card together with the receipt of purchase correspondingly dated substantiates your right to claim under the warranty.
Performance
During the warranty period we undertake to rectify any and all defects to the Hörmann product which can be proved to be attributed to a material or manufacturing fault. We pledge at our discretion either to exchange the defective merchandise for faultless merchandise, repair it or allow a reduction in price. We do not accept costs for dismantling and installation nor for carriage.
Replaced parts become our property.
The warranty does not cover damage caused through:
• normal wear and tear
• improper installation
• negligent care and maintenance
• improper initial and subsequent operation
• negligent or wanton destruction
• external influences such as fire, water, salts, alkaline solutions, acids, abnormal environmental influences
• mechanical damage through improper transport and fitting
• priming and other surface protection treatments
• incorrect or too late applied surface protection treatments
• repair by non-qualified persons
• using non-Hörmann parts without the approval of the manufacturer
• removal of the product number or making it unidentifiable
Electric Operator Warranty
A separate 5 year warranty is granted on our electric operators. This includes operator mechanics, motor and motor control systems. A 2 year warranty is granted on radio equipment, accessories and system controls. There is no warranty on consumables (e.g. fuses, batteries, bulbs etc.).
User Information/Care
Finish - Steel Doors
The coating process applied to the door and chassis is environmentally friendly. Minor scratches or marks are not covered under the conditions of our warranty and should be repaired immediately to prevent corrosion and deterioration of the panel. Corrosive substances such as acids, alkalines, and salts, etc. should be cleaned from the door immediately; failure to do so will result in deterioration of the finish, which will not be covered under our warranty. Should deterioration of the finish start to occur you will need to repaint your door immediately. Prepare the surface lightly with wet and dry. Then treat with solvent based 2 pack epoxy wash primer and a normal commercial paint (cellulose paint must not be used). Hörmann steel doors are a finished product. They do not require re-painting on site. They are however not immune to damage, which can occur at any stage of the handling of the product from factory to site.
Finish - Timber Doors
Timber panels are coated with a neutralising base-stain. Doors must be stored upright, under cover, with wrapping intact, until wrapping is removed. As soon as the door is unwrapped, one coat of a good quality basecoat primer must be applied to both sides of the door. Immediately after installation, your timber doors require a further two coats of a good quality exterior wood finish on both sides. Initial application and periodic treatment should be carried out strictly in accordance with the woodstain manufacturer's instructions. Failure to follow these instructions will result in early deterioration of the timber panel.
Finish - GRP Doors
GRP door panels should periodically washed down using water. This should be done more frequently if fitted near the sea. Bird droppings will bleach the finish on GRP. and should be removed using water as soon as possible. GRP doors should not be painted over.
Paint Finish - Steel Doors
Minor surface damage can easily be repaired using touch up sprays or sticks without invalidating warranties.
Safe Operating and Maintenance of Hormann Garage Doors PDF >
Our Promise