01926 463 888


Seip

Seip's garage door operators are well engineered German made units with many distinct advantages over the competition, the most notable being progressive acceleration and deceleration of the motor speed to provide smoother door movement with reduced stress & quieter door closure by slowing down just prior to closing and their ability to automatically learn and memorize the precise operating characteristics of your door and stop the motor immediately an obstruction is detected to provide the highest possible level of safety for your family & pets.

Seip TM 80 Operator

Seip TM 80 OperatorLow Power Consumption

Save energy by using a Seip door operator. Power consumption is only 2.0 watts in stand-by mode.

Completely Maintenance Free

All models are equipped with an automatic chain tensioning system, keeping the chain tensioned continuously. The C-rail profile protects the chain from dust - no expensive maintenance calls.

Quality

The C-rails and base-plates of our operators are made of 2mm galvanized steel. With the chain drive system we also provide approved quality - chains have been offering excellent reliability for decades.

Soft-Start and Soft-Stop as standard

A feature originally introduced by Seip: by speeding up slowly and reducing the speed before every stop, noises caused by the garage door are reduced to a minimum or even eliminated.

Automatic Force Measurement

This means that the required force for operating your door is precisely measured by the operator. Should it meet with an obstruction, it will automatically reverse direction. No fuss - no problem.

Automatic Light

On each operation the internal automatic light becomes active. The 230v light can be adjusted to stay on between 10 seconds to 10 minutes.

Shop now


Seip TS 100 Operator

The TS100 is designed for heavier double garage doors and garages with up to 25 cars. It is also recommended for canopy type garage doors.

Seip TS 100 OperatorLow Power Consumption

Save energy by using a Seip door operator. Power consumption is only 2.3 watts in stand-by mode.

Completely Maintenance Free

All models are equipped with an automatic chain tensioning system, keeping the chain tensioned continuously. The C-rail profile protects the chain from dust - no expensive maintenance calls.

Quality

The C-rails and base-plates of our operators are made of 2mm galvanized steel. With the chain drive system we also provide approved quality - chains have been offering excellent reliability for decades.

Soft-Start and Soft-Stop as standard

A feature originally introduced by Seip: by speeding up slowly and reducing the speed before every stop, noises caused by the garage door are reduced to a minimum or even eliminated.

Automatic Force Measurement

This means that the required force for operating your door is precisely measured by the operator. Should it meet with an obstruction, it will automatically reverse direction. No fuss - no problem.

Automatic Light

On each operation the internal automatic light becomes active. The 230v light can be adjusted to stay on between 80 to 240 seconds.

Shop Now

 

 

We use cookies to provide you with a better website experience. Close this popup to carry on browsing, or click here to find out more about cookies