Carteck Standard Ribbed Special Offer garage door Steel Carteck

Garage Doors Online are now offering the option of Standard Ribbed Sectional Doors in Black or Anthracite finish for the price of a white door.

The offer includes:

> Choice of woodgrain or smooth finish
> Complete with remote control operator (Carteck Drive 500N, c/w x2 Pearl Twin Hand Transmitters)
> White Frames as standard (upgrade to colour matched frames optional)
> Faster delivery times

Installation Position: 
Fitting behind the reveal as standard

Please Note: Any door heights over 2250mm high - frames cannot be supplied undrilled.

No Twist Fix Brackets? (see our news item here for further information):
https://www.garagedoorsonline.co.uk/news/carteck-sectional-doors

• No loss in headroom - fit the Carteck Drive Operator in just 120mm - low headroom as standard on 95%+ of all door sizes! This only increases to 140mm when double springing is needed on the very tallest and widest doors.
• House with a garage attached? Use the 240mm headroom kit to lift the tracks up and out of the way, no more bumps to your head when entering and exiting your garage.
• Gas meter or obstruction in the way - just use the free headroom kit to lift the tracks up, giving you extra room to clear the obstruction on install.

Please Note: Doors Over 2250mm high will have holes drilled in the frame. It is advised that the customer will either need to clad over the holes themselves or you may purchase 3D 85mm Profile Covers (POA) - we can advise on this if required.

Optional Extras:

External Emergency Release - fitted as standard in the top left hand corner of all doors.

Inbetween Opening Installation Kit - If you are fitting inbetween the structural opening this kit is required to adapt the steel frame which is designed as standard for behind fitting. The legs of the frame when fitted inbetween will have a series of factory drilled holes showing which will require a cloaking strip (not provided).*

*If fitting between the opening, please deduct 180mm from the opening width to determine the ordering width.
Deduct 120mm for manual doors and 140mm for electric operation (unless the additional fitting bracket is purchased then 120mm applies) from the opening height to determine the ordering height.

These doors come complete with a remote control operator as standard. Manual operation is not available with this offer.

Remote Control Electric Operator:
The Carteck Drive 500N can lift any size door. 
The integrated drive and control unit of the Carteck Drive fits discreetly above the door.
The fixed chain drive of the Carteck Drive range is quieter and renowned for long-term reliability compared to revolving chain or belt designs.
The Carteck Drive 500N comes with x2 Pearl Twin Handsets as standard.
The Pearl Twin transmitter has twin buttons that can be configured for two functions such as open and close and turn on the light.
Please Note: Door heights greater than 2375mm, a 1096mm rail extension will be required at an extra cost.

Between Opening fit Sectional Doors - Link for info >

Installation Instructions provided with every door.

5-year Manufacturer's Guarantee:
> On castors, hinges, springs, cable castors and cables for normal use (opening / closing max. 5 times a day).

10-year Manufacturer's Guarantee:
> On the panel against rust inside or outside
> On the steel splitting away from the foam
> On Material or Manufacturing faults of all immoveable frame parts, if it can be proved that they are inoperative or their use is impaired
> On floor seals, central seals, side seals and header seal against perishing
> On high performance springs

If fitting between the opening, please deduct 180mm from the opening width to determine the ordering width.
Deduct 120mm for manual doors and 140mm for electric operation (unless the additional fitting bracket is purchased then 120mm applies) from the opening height to determine the ordering height.