Carteck Switch PRO 40mm Centre Ribbed Vertical (3 Standard Colours) garage door Steel Carteck



Carteck Switch PRO 40mm Centre Ribbed Vertical (3 Standard Colours) Steel Side Hinged - insulated
Carteck
Carteck Look at our customer reviews on trustpliot
Side Hinged - insulated Steel GEAR TYPE: Side Hinged
Delivery lead time: around 3 weeks*
Made to measure sizes, 3 popular colours, delivered fast.

Swap out a heavy, draughty up and over door with the CarTeck Switch Pro insulated side hinged doorset. Pre-assembled in its aluminium frame with wind-out fixing lugs, it fits straight in without packers.

  • Made to measure up to 2640mm wide x 2356mm high at no extra cost
  • 40mm insulated woodgrain panels in 3 colours (2.20 W/m²K U value)
  • Upgraded lipped weather threshold and 3D adjustable hinges
  • Outward opening, left or right hand leading, with optional spring stays
  • Matching side doors available up to 1250mm x 2170mm

* Subject to UK delivery postcode.

  • NEW - Made to Measure
  • 40mm Insulated Steel Door Leaves
  • No Warping, Cracking or Peeling
  • Great Value Insulated Side Hinged Door
1
Choose Your Sizes
2
Choose your options
Web Price from: £1,776.00 Inc. VAT
£1,480.00 Ex. VAT

CarTeck Switch Pro - Vertical Centre Ribbed Insulated Side Hinged Doors

The Vertical Centre Ribbed design takes its cue from traditional upright timber garage doors, making it one of the easiest styles to pair with almost any British property, from older period homes right through to modern brick new builds. Built from 40mm thick foam-filled double skinned steel panels, this relaunched Switch Pro model swaps the old smooth finish for a durable external woodgrain texture in a choice of Anthracite Grey, White or Jet Black.

Most garages nowadays store bikes, tools, freezers or gym kit rather than cars, which is why side hinged doors make so much practical sense on a daily basis. Opening just the active leaf lets you walk straight in and out without lifting a heavy overhead canopy or showing the entire contents of your garage to the street. Previously restricted to replacing standard 7ft and 7ft 6in openings only, the Switch Pro is now made to measure as standard at no extra cost up to 2640mm wide by 2356mm high, so slightly awkward brickwork openings are no longer an issue.

If you use the garage as a workshop or utility space, the 40mm insulated panels, mitred aluminium perimeter frames and all-round weather seals combine with a raised lipped floor threshold to deliver a certified U value of 2.20 W/m²K. Security is a clear step up from a single-skin up and over door too, using stainless steel lever handles, top and bottom flush shoot bolts on the inactive leaf, and a Euro profile cylinder with three keys plus a handy internal thumb turn for quick exits. Every doorset arrives pre-hung in its aluminium box frame with built-in wind-out fixing lugs so you can square it up without timber or plastic packers, all manufactured in Teckentrup's Warrington factory and tested to BS EN 13241-1 with CE and UKCA marking.

  • Traditional upright Vertical Centre Ribbed design in 3 woodgrain colours (Anthracite Grey, White or Jet Black)
  • Made to measure as standard up to 2640mm wide x 2356mm high at no extra cost
  • 40mm thick double skinned insulated steel panels delivering an improved 2.20 W/m²K U value
  • Pre-hung in a factory-fitted aluminium sub frame with wind-out fixing lugs, no packers required
  • Stainless steel handles, sashlock, internal thumb-turn Euro cylinder, 3 keys and flush shoot bolts included
  • Upgraded raised lipped aluminium threshold with bulb weather seal
  • Manufactured in the UK for faster delivery in around 2 to 3 weeks* (also available in Centre Rib Horizontal and glazed Classic designs)

* Delivery lead times depend on your UK postcode area.

Switch Pro vs Full CarTeck Range

Both the Switch Pro and our main CarTeck side hinged doors are built around 40mm thick insulated panels, so you get the same core panel strength and insulation depth on both. Where they differ is how streamlined the options are. The CarTeck Switch Pro deliberately sticks to a focused specification: 3 panel designs, 3 woodgrain colours, an outward-opening 50/50 split, surface mounted 3D hinges, a lipped centre threshold and single-garage sizing. Keeping factory production focused like this is how Teckentrup keeps the price noticeably lower and brings UK lead times down to around 2 to 3 weeks.

If your garage opening fits within 2640mm by 2356mm and one of the three woodgrain colours suits your house, the Switch Pro gives you genuine 40mm insulated performance for much less money. If your project needs concealed hinges for a cleaner external look, an asymmetric 1/3 and 2/3 split, inward opening, larger dimensions, a different bottom threshold, or access to the wider palette of smooth finishes, Trend shades, wood effects and bespoke RAL colours, take a look at the normal CarTeck full range of 40mm insulated side hinged doors on our website instead.

Ordering Sizes

Select the nearest "up to" size band first, then enter your exact made to measure dimensions up to a maximum of 2640mm wide and 2356mm high. All ordering measurements on the CarTeck Switch Pro are the overall door and sub frame dimensions, so please remember to allow for fitting tolerance (typically taking 20mm off the brickwork width and 10mm off the height) if you are installing within the opening. Once your size is set, simply pick from the 3 standard colours and choose whether you want spring door stays or none required.

Leading Leaf Handing

Every Switch Pro door is built in an outward-opening 50/50 split with the right hand leaf opening first as standard when viewed from outside. If a left hand leading leaf works better for your driveway or garden path, let us know when ordering as this can be specified at no extra cost.

Door Colour

Choose from Anthracite Grey RAL 7016, White RAL 9016 or Jet Black RAL 9005, all supplied with a durable woodgrain panel finish on the outside across all three Switch Pro designs. The RAL references are a guide to the nearest colour rather than an exact match to other coated building products. Because the aluminium sub frame and door leaf frames have a smooth finish, you may notice a slight difference in shade and sheen against the textured panels depending on the light. If you are matching existing windows or doors on your property, it is always worth asking us for a colour sample first.

* Dark colours are best avoided where the garage door faces prolonged direct sunlight.

Door Stays

Spring door stays are not included as standard on the Switch Pro, so you can select them as an option or choose none required when ordering. Fitting a stay holds the door leaf securely in the open position, which stops the wind catching the doors while you are driving in or unloading the car. Because these are 50/50 split doors, we usually recommend fitting stays to keep both leaves under control on breezy days. If an individual door leaf works out under 810mm wide, a friction stay is supplied in place of the spring stay.

Matching Side Door

You can also order a matching pedestrian side door specifically to pair up with the Centre Rib Horizontal garage door design. Built with the same 40mm insulated woodgrain panels and smooth aluminium frame in the same 3 colours, it works well when you have a separate side entrance next to the main garage. Like the main Switch Pro garage doors, these are made to measure using overall door and sub frame dimensions up to 1250mm wide and 2170mm high.

Overall Frame Height Up To Overall Frame Width Up To 995mm Overall Frame Width Up To 1250mm
1870mm Size Band 1 Size Band 2
2170mm Size Band 3 Size Band 4

* The matching pedestrian side door is only manufactured in the Centre Rib Horizontal design and is not available in the Vertical Centre Ribbed or Classic styles.

CarTeck Switch Pro – Key Upgrades & Compliance

Relaunched as the Switch Pro, this range upgrades the original fixed-size Switch doors with made to measure sizing as standard, a tougher external woodgrain finish, an upgraded lipped weather threshold, and optional spring stays. Every doorset is independently tested and certified to BS EN 13241-1 safety legislation, carrying both CE and UKCA marks.

CE and UKCA marked compliant CarTeck Switch Pro garage doors

Panels, Frame and Insulation

Each CarTeck Switch Pro door leaf is built around 40mm thick interlocking foam-filled steel panels set inside a corrosion-resistant extruded aluminium perimeter frame, offered in Centre Rib Horizontal, Vertical Centre Ribbed or Classic designs. Tested on a 2406mm x 2240mm complete installed door, the Switch Pro achieves a certified thermal U value of 2.20 W/m²K, making a noticeable difference if your garage is attached to the house or used as a workshop.

40mm thick insulated steel CarTeck panels

Both the outer sub frame and the individual door leaf frames use neat mitred corners with built-in three-sided weather seals, backed up by a continuous circumferential seal running right around each leaf to keep draughts and damp out.

Mitred aluminium frame corners and circumferential weather strips

Hinges, New Lipped Threshold and Opening

Every door in the Switch Pro range is made to measure in a 50/50 equal split and opens outwards only, keeping all your internal wall and ceiling space clear. Looking from the outside, the right hand leaf opens first as standard, though we can order a left hand leading leaf at no extra cost if that suits your driveway layout better. Each leaf hangs on three heavy-duty surface mounted aluminium hinges with 3D adjustment, making it straightforward to square up the alignment during fitting or tweak it if the building settles later on.

Surface mounted 3D adjustable aluminium hinges

At floor level, the Switch Pro introduces an upgraded raised aluminium lipped centre threshold fitted with a flexible bulb weather seal. Unlike the old flat strip threshold, this gives the bottom of both leaves a positive raised stop to close onto, helping to block wind-blown rain and leaves on a level garage floor.

  • New for Switch Pro: Made to measure overall frame sizes up to 2640mm wide x 2356mm high at no extra cost
  • New for Switch Pro: Raised aluminium lipped floor threshold with integrated bulb weather strip
  • Outward opening only in an equal 50/50 split configuration (right hand leading as standard, left hand no-cost option)
  • Optional spring door stays available to hold leaves open in breezy conditions (doors with leaves under 810mm wide receive friction stays instead)

Locking, Hardware and Glazing

Day to day access on the active leaf is handled by a CE marked DIN standard latch and deadbolt sashlock paired with tough stainless steel round bar lever handles on 50mm roses and matching escutcheons. The inactive leaf is reinforced with a stainless steel strike plate, a solid steel lock keep box, and an adjustable latch plate so you can set how tightly the active door pulls onto its weather seals.

Stainless steel lever handles and adjustable latch keep

The secondary leaf locks securely at the top and bottom using concealed flush shoot bolts. Each bolt seats into an adjustable keep plate, letting you fine-tune the closing tension as the rubber seals bed in over the years.

Top and bottom concealed flush shoot bolts with adjustable keeps

For security, the Euro profile lock cylinder is certified to BS EN1303 Grade 2 against drilling and picking, and includes a sacrificial snap-off front section so you can still operate the lock with your key even if an intruder tries to force the barrel. Every door comes with three keys as standard (extra keys can be cut at any locksmith) plus an internal thumb turn for quick keyless exits from inside the garage. If you choose the Classic design rather than the solid Horizontal or Vertical Centre Ribbed styles, each leaf is fitted with a 680mm wide by 370mm high clear double glazed polymer window with a black mock-lead lattice.

BS EN1303 Grade 2 Euro cylinder with internal thumb turn and 3 keys

Woodgrain Finishes and Colour Matching

Replacing the smooth finish of the earlier Switch model, the external panel faces on all Switch Pro doors now feature a durable woodgrain texture in Anthracite Grey (RAL 7016), White (RAL 9016) or Jet Black (RAL 9005). Inside the garage, the panel surfaces are finished in a clean grey white (RAL 9002) stucco texture to bounce light around the room, with smooth internal joint plates. Both the outer sub frame and the frames wrapping each door leaf come in a smooth finish coated to match your chosen external colour.

  • External RAL numbers are a guide to the nearest shade only and won't be an exact match to other powder-coated doors or windows
  • Because the smooth aluminium frames and woodgrain steel panels use different base materials and coating methods, you will see some variation in shade and sheen between the frame, window surround and panel face depending on the light
  • Always ask us for a physical colour sample before ordering if you are trying to match existing woodwork or UPVC

* Please avoid choosing dark colours like Jet Black or Anthracite Grey if your garage sits in prolonged direct sunlight, as dark insulated panels absorb heat and can expand.

Effortless 'Straight Swap' Installation

Replacing your old garage door does not have to be a complicated, time consuming project. The CarTeck Switch has been specifically engineered with unparalleled ease of installation in mind, making it the ultimate 'straight swap' solution for the most common UK garage openings.

Unlike traditional garage doors that require you to painstakingly build, square up, and paint a separate timber sub frame on site, the CarTeck Switch is delivered to you as a complete, fully assembled unit. The insulated steel door leaves arrive already pre hung perfectly within a heavy duty, factory finished aluminium frame. All the complex components, including the premium hinges, the advanced multipoint locking system, and the flush bolts, are fully factory fitted and rigorously tested before delivery.

Because the aluminium frame is equipped with built in wind out installation lugs, there is absolutely no need for fiddly timber packers. You simply offer the complete doorset into your cleared brickwork opening, use the lugs to achieve a perfectly level and plumb fit, and fix it securely into place. It really is that straightforward.

Watch the video below to see just how fast and simple it is to install the CarTeck Switch:



The door is delivered with the frame, hinges and all major components factory fitted, ready for easy on-site installation.

Carteck packaging_1 Carteck packaging_2
 

 

 

Teckentrup CarTeck Switch Warranty & Guarantee

Teckentrup manufactures the CarTeck Switch range to the highest engineering standards, ensuring reliable, long lasting performance. Provided the door has been correctly installed, maintained by a garage door specialist, and cleaned in accordance with the manufacturer's instructions, you will benefit from their comprehensive multi point guarantee.

10 Year Manufacturer's Guarantee

  • Panel Integrity: Guaranteed against rust penetration from the inside to the outside.
  • Insulation Stability: Guaranteed against the door panel steel separating from the insulating foam core.
  • Frame Durability: Covers material and manufacturing flaws on all non moving parts of the frame that render it unusable or substantially compromise its function.
  • Seal Protection: The floor seal, intermediate seals, and frame seals are guaranteed against rotting.

2 Year Manufacturer's Guarantee

  • Hardware & Moving Parts: Covers window units, hinges, locks, handles, and friction stays. (Please note: This applies to normal domestic use, classified as a maximum of 5 opening and closing cycles per day).

Important Warranty Conditions

To ensure your warranty remains valid, it is essential that the door is washed regularly with warm soapy water to remove dust, dirt, and atmospheric pollutants. The warranty does not cover mechanical damage caused by improper transport, installation, or operation. Furthermore, standard warranties do not apply to doors subjected to extreme environmental conditions, such as corrosive atmospheres found in coastal climates with high salt content, unless a specific coastal paint upgrade was applied at the point of order.

Measuring Guide & Made to Measure Sizes

Unlike the original Switch range which only came in six fixed stock sizes, the CarTeck Switch Pro is now made to measure as standard at no extra cost. Every doorset arrives pre-hung in its own factory-fitted aluminium box section sub frame, up to a maximum overall frame size of 2640mm wide by 2356mm high.

To measure up when replacing an old up and over door, measure the full brick-to-brick structural opening width and floor-to-lintel height that will be left once your old door and its existing timber sub frame have been completely removed. Always measure in at least three places across the width and height, and work from the smallest measurement so the new frame won't bind on an uneven wall.

Allowing for Fitting Tolerance

All ordering dimensions on our shop are the exact Overall Frame Size (door plus aluminium sub frame) that the factory will manufacture. When installing between brickwork within the reveal, you need to deduct fitting clearance from your smallest structural opening measurements before entering your ordering sizes:

  • Overall Frame Width to order: Structural brickwork opening width minus 20mm (gives 10mm clearance each side)
  • Overall Frame Height to order: Structural opening height minus 10mm (gives 10mm clearance at the head)
  • Easy squaring on site: Built-in wind-out fixing lugs in the aluminium frame take up the 10mm side gaps cleanly, so no timber or plastic packers are required

* Please double-check that you haven't deducted fitting tolerance twice. Whatever Over-Frame width and height you enter when ordering is the exact outer frame size that will be built.

Made to Measure Pricing Size Bands (Over-Frame Size)

Simply pick the nearest "up to" size band on the product page that covers your required Over-Frame dimensions, then type in your exact millimetre width and height:

Over-Frame Height Up To Width Up To 2121mm Width Up To 2426mm Width Up To 2578mm Width Up To 2640mm
Up to 2051mm 2121 x 2051 2426 x 2051 2578 x 2051 2640 x 2051
Up to 2204mm 2121 x 2204 2426 x 2204 2578 x 2204 2640 x 2204
Up to 2356mm 2121 x 2356 2426 x 2356 2578 x 2356 2640 x 2356

Clear Drive-Through & Site Checks

If you park a car inside or move wide equipment through the doorway, bear in mind that the outer aluminium sub frame and outward-opening door leaves reduce the clear drive-through passage slightly compared to the raw brickwork opening:

  • Clear Opening Width: Structural opening minus 160mm on Horizontal/Vertical Centre Ribbed models (or minus 190mm on Classic models)
  • Clear Opening Height: Structural opening minus 80mm
  • Floor & Driveway Level: A flat, level floor across the threshold is essential for the raised lipped floor seal to sit properly, and because all Switch Pro doors open outwards, check your driveway doesn't slope steeply upwards right outside the garage

Please refer to the technical drawings below for a clear visual reference on structural opening, overall frame and soffit installation points:

CarTeck Side Hinged Garage Door Measuring Guide

CarTeck Switch Pro installation within the brickwork reveal and soffit

View all in the Side Hinged - insulated range >
Our Promise

We pride ourselves on our customer service and are always happy to help

We use cookies to provide you with a better website experience. Close this popup to carry on browsing, or click here to find out more about cookies