Made to measure sizes, traditional glazed look, delivered fast.
Bring natural daylight into a dark garage with the CarTeck Switch Pro Classic insulated side hinged doorset. Fitted with traditional mock-lead windows, it arrives pre hung in its aluminium frame with wind out lugs for packer-free fitting.
- Made to measure up to 2640mm wide x 2356mm high at no extra cost
- Clear double glazed windows (680mm x 370mm) with black mock-lead lattice
- 40mm insulated woodgrain panels in 3 colours (2.20 W/m²K U value)
- Upgraded lipped weather threshold and 3D adjustable hinges
- Outward opening 50/50 split with optional spring door stays
* Subject to UK delivery postcode.
- Made to Measure as Standard
- Manufactured in the UK
- 3 standard colours to choose
- 3 week delivery*
CarTeck Switch Pro - Classic Glazed Insulated Side Hinged Doors
If your garage has no side windows and feels like a dark cave every time you step inside, the CarTeck Switch Pro Classic brings welcome natural daylight straight into the space while adding traditional kerb appeal outside. Inspired by period coach house doors, each leaf is built from 40mm thick foam-filled steel panels in a hard-wearing external woodgrain finish, complete with a double glazed polymer window and black mock-lead lattice in Anthracite Grey, White or Jet Black.
Each window measures a neatly proportioned 680mm wide by 370mm high in the top section of the door leaf. While slightly more compact than the deeper glazing options found on the bespoke CarTeck range, this high-set proportion works really well in practice: it lets plenty of overhead daylight into a workshop or utility area without putting the contents of your garage on full view to passers-by, and keeps more of the solid 40mm insulated steel panel intact for warmth and rigidity.
Relaunched as the Switch Pro, these doors are no longer restricted to fixed imperial replacement sizes and now come made to measure as standard at no extra cost up to 2640mm wide by 2356mm high. Opening just the active leaf gives you quick, everyday walk-in access for bikes, tools or appliances without lifting a heavy overhead door. Every set arrives factory-assembled in its mitred aluminium box frame with built-in wind-out fixing lugs so you can square it into the brickwork without packers, complete with stainless steel lever handles, top and bottom flush shoot bolts, an upgraded lipped floor threshold, and a Grade 2 thumb-turn Euro cylinder. Manufactured in Warrington to BS EN 13241-1, every door carries full CE and UKCA marking.
- Traditional Classic glazed design in Anthracite Grey, White or Jet Black woodgrain
- Double glazed 680mm x 370mm clear polymer window per leaf with black mock-lead lattice
- Made to measure as standard up to 2640mm wide x 2356mm high at no extra surcharge
- 40mm thick insulated steel panels achieving a certified 2.20 W/m²K thermal U value
- Pre-hung in an aluminium sub frame with wind-out fixing lugs, no packers needed
- Stainless steel handles, sashlock, Grade 2 thumb-turn cylinder, 3 keys and flush bolts included
- Manufactured in the UK with fast delivery lead times of roughly 2 to 3 weeks*
* Delivery lead times depend on your UK postcode area.
Switch Pro Classic vs Full CarTeck Glazed Range
Both the Switch Pro Classic and our main CarTeck side hinged collection use 40mm thick insulated steel panels, giving you the same solid panel depth on both. Where they differ is how streamlined the specification is. The Switch Pro Classic sticks to a focused setup: the neat 680mm x 370mm clear mock-lead window, 3 woodgrain colours, an outward-opening 50/50 split, surface mounted 3D hinges, a lipped centre threshold and single-garage sizing. Keeping factory production focused like this is how Teckentrup keeps the price noticeably lower and brings UK lead times down to around 2 to 3 weeks.
If your opening fits within 2640mm by 2356mm and you like the traditional mock-lead window style in one of the three woodgrain colours, the Switch Pro Classic offers genuine 40mm insulated performance for significantly less money. If your project calls for larger window proportions, frosted or plain glazing styles, concealed hinges, an asymmetric 1/3 and 2/3 split, inward opening, or wider colour and finish choices, take a look at the full CarTeck 40mm insulated side hinged range on our website instead.
Ordering Sizes
Select the nearest "up to" size band first, then enter your exact made to measure dimensions up to a maximum of 2640mm wide and 2356mm high. All ordering measurements on the CarTeck Switch Pro Classic are the overall door and sub frame dimensions, so please remember to allow for fitting tolerance (typically taking 20mm off the brickwork width and 10mm off the height) if you are installing within the opening. Once your size is set, simply pick from the 3 standard colours and choose whether you want spring door stays or none required.
Leading Leaf Handing
Every Switch Pro Classic door is built in an outward-opening 50/50 split with the right hand leaf opening first as standard when viewed from outside. If a left hand leading leaf suits your driveway or path layout better, let us know when ordering as this can be specified at no extra cost.
Door Colour & Window Surrounds
Choose from Anthracite Grey RAL 7016, White RAL 9016 or Jet Black RAL 9005, all supplied with a durable woodgrain panel finish on the outside. Each leaf includes a 680mm x 370mm clear polymer double glazed window with a black mock-lead lattice as a fixed specification on the Classic design (alternative frosted glass or plain window styles are available on the main bespoke CarTeck 40mm range).
The RAL references are a guide to the nearest colour rather than an exact match to other coated building products. Because the aluminium sub frame, door leaf frames and polymer window surrounds use different base materials and finishes from the textured woodgrain steel panels, you will notice a slight difference in shade and sheen depending on the light. If you are matching existing windows or doors on your property, it is always worth asking us for a colour sample first.
* Dark colours are best avoided where the garage door faces prolonged direct sunlight.
Door Stays
Spring door stays are not included as standard on the Switch Pro, so you can select them as an option or choose none required when ordering. Fitting a stay holds the door leaf securely in the open position, preventing wind gusts from catching the glazed leaves while you are driving in or unloading the car. Because these are 50/50 split doors, we usually recommend fitting stays to keep both leaves under control on breezy days. If an individual door leaf works out under 810mm wide, a friction stay is supplied in place of the spring stay.
Need a Pedestrian Side Door?
Please note that the budget-friendly Switch Pro pedestrian side door (up to 1250mm x 2170mm) is only manufactured in the solid Centre Rib Horizontal design—though because it uses the exact same 40mm woodgrain steel panels and 3 standard colours, many customers happily pair a solid horizontal side door on a side alleyway with a Classic glazed door on the front driveway. If you specifically want a glazed Classic pedestrian side door to match, please view our full bespoke CarTeck 40mm insulated side door range.
CarTeck Switch Pro Classic – Glazing, Upgrades & Compliance
Relaunched as the Switch Pro, the Classic model pairs traditional double glazed top windows with made to measure sizing as standard, a tougher external woodgrain finish, an upgraded lipped weather threshold, and optional spring stays. Every doorset is independently tested and certified to BS EN 13241-1 safety legislation, carrying both CE and UKCA marks.

Traditional Double Glazed Windows & 40mm Insulated Panels
Each door leaf on the Classic model incorporates a 680mm wide by 370mm high polymer double glazed window set into the upper section, featuring clear glazing and a traditional black mock-lead effect lattice across all door sizes. Positioning a neatly proportioned window high in each leaf brings natural daylight into your garage while maintaining good privacy from the street and preserving maximum 40mm foam-filled steel panel area below.
The interlocking 40mm insulated panels sit inside a corrosion-resistant extruded aluminium perimeter frame. Tested on a 2406mm x 2240mm doorset, the Switch Pro range achieves a certified U value of 2.20 W/m²K, making a real difference if your garage adjoins the house or serves as a home workshop.

Both the outer sub frame and the individual door leaf frames use neat mitred corners with built-in three-sided weather seals, backed up by a continuous circumferential seal running right around each leaf to keep draughts and damp out.

Hinges, New Lipped Threshold and Opening
Every Switch Pro Classic door is made to measure in an equal 50/50 split and opens outwards only, leaving all your internal wall and ceiling space clear (note that on the Classic model, clear drive-through width is your structural opening minus 190mm). Looking from outside, the right hand leaf opens first as standard, with a left hand leading leaf available as a no-cost option when ordering. Each leaf hangs on three heavy-duty surface mounted aluminium hinges with 3D adjustment, making it straightforward to square up the alignment during fitting or tweak it over time.

At floor level, the Switch Pro introduces an upgraded raised aluminium lipped centre threshold fitted with a flexible bulb weather seal, giving the bottom of both leaves a positive stop to close against to block wind-blown rain and leaves on a level garage floor.
- Classic Glazing: One 680mm x 370mm clear polymer double glazed window with black mock-lead lattice per leaf
- New for Switch Pro: Made to measure overall frame sizes up to 2640mm wide x 2356mm high at no extra cost
- New for Switch Pro: Raised aluminium lipped floor threshold with integrated bulb weather strip
- Outward opening only in an equal 50/50 split (right hand leading as standard, left hand no-cost option)
- Optional spring door stays available to hold leaves open in breezy weather (leaves under 810mm wide receive friction stays instead)
Locking and Stainless Steel Hardware
Everyday entry on the active leaf is controlled by a CE marked DIN standard latch and deadbolt sashlock paired with stainless steel round bar lever handles on 50mm roses and matching escutcheons. The inactive leaf is reinforced with a stainless steel strike plate, a solid steel lock keep box, and an adjustable latch plate so you can set how tightly the active door pulls onto its weather seals.

The secondary leaf locks at the top and bottom using concealed flush shoot bolts into adjustable keep plates, letting you fine-tune the closing tension as the seals bed in.

Security is backed up by a BS EN1303 Grade 2 Euro profile cylinder with anti-drill and anti-pick protection plus a sacrificial snap-off front section so you can still unlock the door with your key if forced. Three keys are included as standard alongside a convenient internal thumb turn for quick keyless exits from inside the garage.

Woodgrain Finishes and Colour Matching
External panel faces on the Switch Pro Classic feature a durable woodgrain texture in Anthracite Grey (RAL 7016), White (RAL 9016) or Jet Black (RAL 9005). Inside the garage, the panel surfaces are finished in a bright grey white (RAL 9002) stucco texture to bounce natural window light further around the room, with smooth internal joint plates. Both the outer sub frame and the door leaf frames come in a smooth finish coated to match your chosen external colour.
- External RAL numbers are a guide to the nearest shade only and won't be an exact match to other powder-coated doors or windows
- Because the smooth aluminium frames, polymer window surrounds and woodgrain steel panels use different base materials and coating processes, you will see some variation in shade and sheen depending on the light
- Always ask us for a physical colour sample before ordering if you are matching existing woodwork or UPVC
* Please avoid choosing dark colours like Jet Black or Anthracite Grey if your garage sits in prolonged direct sunlight, as dark insulated panels absorb heat and can expand. Note also that the matching Switch Pro pedestrian side door is only made in the solid Centre Rib Horizontal style, not the glazed Classic design.
Effortless 'Straight Swap' Installation
Replacing your old garage door does not have to be a complicated, time consuming project. The CarTeck Switch has been specifically engineered with unparalleled ease of installation in mind, making it the ultimate 'straight swap' solution for the most common UK garage openings.
Unlike traditional garage doors that require you to painstakingly build, square up, and paint a separate timber sub frame on site, the CarTeck Switch is delivered to you as a complete, fully assembled unit. The insulated steel door leaves arrive already pre hung perfectly within a heavy duty, factory finished aluminium frame. All the complex components, including the premium hinges, the advanced multipoint locking system, and the flush bolts, are fully factory fitted and rigorously tested before delivery.
Because the aluminium frame is equipped with built in wind out installation lugs, there is absolutely no need for fiddly timber packers. You simply offer the complete doorset into your cleared brickwork opening, use the lugs to achieve a perfectly level and plumb fit, and fix it securely into place. It really is that straightforward.
Watch the video below to see just how fast and simple it is to install the CarTeck Switch:
The door is delivered with the frame, hinges and all major components factory fitted, ready for easy on-site installation.
![]() |
![]() |
Teckentrup CarTeck Switch Warranty & Guarantee
Teckentrup manufactures the CarTeck Switch range to the highest engineering standards, ensuring reliable, long lasting performance. Provided the door has been correctly installed, maintained by a garage door specialist, and cleaned in accordance with the manufacturer's instructions, you will benefit from their comprehensive multi point guarantee.
10 Year Manufacturer's Guarantee
- Panel Integrity: Guaranteed against rust penetration from the inside to the outside.
- Insulation Stability: Guaranteed against the door panel steel separating from the insulating foam core.
- Frame Durability: Covers material and manufacturing flaws on all non moving parts of the frame that render it unusable or substantially compromise its function.
- Seal Protection: The floor seal, intermediate seals, and frame seals are guaranteed against rotting.
2 Year Manufacturer's Guarantee
- Hardware & Moving Parts: Covers window units, hinges, locks, handles, and friction stays. (Please note: This applies to normal domestic use, classified as a maximum of 5 opening and closing cycles per day).
Important Warranty Conditions
To ensure your warranty remains valid, it is essential that the door is washed regularly with warm soapy water to remove dust, dirt, and atmospheric pollutants. The warranty does not cover mechanical damage caused by improper transport, installation, or operation. Furthermore, standard warranties do not apply to doors subjected to extreme environmental conditions, such as corrosive atmospheres found in coastal climates with high salt content, unless a specific coastal paint upgrade was applied at the point of order.
Measuring Guide & Made to Measure Sizes
Unlike the original Switch range which only came in six fixed stock sizes, the CarTeck Switch Pro is now made to measure as standard at no extra cost. Every doorset arrives pre-hung in its own factory fitted aluminium box section sub frame, up to a maximum overall frame size of 2640mm wide by 2356mm high.
To measure up when replacing an old up and over door, measure the full brick to brick structural opening width and floor-to-lintel height that will be left once your old door and its existing timber sub frame have been completely removed. Always measure in at least three places across the width and height, and work from the smallest measurement so the new frame won't bind on an uneven wall.
Allowing for Fitting Tolerance
All ordering dimensions on our shop are the exact Overall Frame Size (door plus aluminium sub frame) that the factory will manufacture. When installing between brickwork within the reveal, you need to deduct fitting clearance from your smallest structural opening measurements before entering your ordering sizes:
- Overall Frame Width to order: Structural brickwork opening width minus 20mm (gives 10mm clearance each side)
- Overall Frame Height to order: Structural opening height minus 10mm (gives 10mm clearance at the head)
- Easy squaring on site: Built-in wind-out fixing lugs in the aluminium frame take up the 10mm side gaps cleanly, so no timber or plastic packers are required
* Please double-check that you haven't deducted fitting tolerance twice. Whatever Over-Frame width and height you enter when ordering is the exact outer frame size that will be built.
Made to Measure Pricing Size Bands (Over-Frame Size)
Simply pick the nearest "up to" size band on the product page that covers your required Over-Frame dimensions, then type in your exact millimetre width and height:
| Over-Frame Height Up To | Width Up To 2121mm | Width Up To 2426mm | Width Up To 2578mm | Width Up To 2640mm |
|---|---|---|---|---|
| Up to 2051mm | 2121 x 2051 | 2426 x 2051 | 2578 x 2051 | 2640 x 2051 |
| Up to 2204mm | 2121 x 2204 | 2426 x 2204 | 2578 x 2204 | 2640 x 2204 |
| Up to 2356mm | 2121 x 2356 | 2426 x 2356 | 2578 x 2356 | 2640 x 2356 |
Clear Drive-Through & Site Checks
If you park a car inside or move wide equipment through the doorway, bear in mind that the outer aluminium sub frame and outward-opening door leaves reduce the clear drive-through passage slightly compared to the raw brickwork opening:
- Clear Opening Width: Structural opening minus 160mm on Horizontal/Vertical Centre Ribbed models (or minus 190mm on Classic models)
- Clear Opening Height: Structural opening minus 80mm
- Floor & Driveway Level: A flat, level floor across the threshold is essential for the raised lipped floor seal to sit properly, and because all Switch Pro doors open outwards, check your driveway doesn't slope steeply upwards right outside the garage
Please refer to the technical drawings below for a clear visual reference on structural opening, overall frame and soffit installation points:


Our Promise
We pride ourselves on our customer service and are always happy to help













.jpg)
.jpg)
Carteck Switch PRO 40mm Centre Ribbed Vertical (3 Standard Colours)
Carteck Switch PRO 40mm Centre Ribbed Horizontal (3 Standard Colours)