The purpose made Garador Cathedral is a traditional arched top panelled steel side hinged garage door built to your exact overall size, from 2234mm to 2539mm wide and 1991mm to 2196mm high. Supplied pre framed in its own steel frame with lever handles, two point locking and gas pistons for straightforward installation, and available in 19 factory powder coated colours, it is an ideal decorative door for character properties with non standard openings.
- Strong and robust doors
- Factory Finished Colour Options
- Factory Fitted Steel Frame
- Concealed Hinges as Standard
- Related Downloads
- Garador Side Hinged Doors
- The Garador Range Brochure
- Garador Side Hung Door Stays
- Garador Side Hinged and Pedestrian Doors Installation Manual
- How to maintain your garage door
- GaraMatic Operators
- Garador Garamatic 9 (Series 4) Installation Instructions
- Garador Garamatic 10 and 20 Operators Installation Instructions 1
- Garador Garamatic 10 and 20 Operators Installation Instructions 2
Garador Cathedral Steel Side Hinged Garage Door, Purpose Made
The purpose made Garador Cathedral keeps the exact same arched top row of panels over two rows of rectangular pressings as the standard door, built to the overall width and height of your opening. Older character properties and period cottages are where you are most likely to find a brickwork opening that does not match a standard imperial size, and they are also the homes where packing a standard door out with wide timber battens and plastic trims down each side looks most out of place.
Ordering a purpose made size lets the steel frame sit neatly inside the brickwork reveals, so the decorative arched panels look like they belong to the building rather than an afterthought.
Everyday Walk In Access
Because most UK garages are now used for keeping bikes, garden machinery, tools, or a chest freezer rather than parking a car, outward opening side hinged doors make day to day life much simpler than lifting an overhead door. You can unlock and open just the leading leaf to walk in and out like a normal external door, while the full ceiling height and walls inside the garage stay completely clear of tracks and springs.
Key Features
• Made to your exact overall size, from 2234mm to 2539mm wide
• Made to measure heights from 1991mm to 2196mm overall
• Decorative arched top pressings over two rows of rectangular panels
• Supplied factory framed in a colour matched 75mm steel frame
• Black lever handles inside and out with two point shoot bolt locking
• Hydraulic gas pistons, metal door stays, rubber weather seals, and a 20mm threshold
• Traffic White (RAL 9016) as standard, with 18 other colours at extra cost
Construction
The deep pressed panels are made from high grade galvanised steel, built around a rigid welded steel box section chassis, and factory powder coated inside and out. Each door is prehung at the factory in its own steel box frame with 75mm wide uprights, a 60mm high head, and concealed hinges, designed to fit cleanly between your brickwork.
Size Limits
The purpose made Cathedral can be manufactured from 2234mm to 2539mm wide and from 1991mm to 2196mm high overall (including the steel frame). Below 2234mm wide there is not enough width across the leaves for the arched panel pressings, so for narrower openings the purpose made Garador Carlton is the steel alternative, going right down to 1930mm wide.
Door Split and Ordering
The door is supplied as an equal 50/50 split as standard. A 1/3 and 2/3 split is available at the same price at 2234mm overall width only, giving an 800mm leading leaf with the pressings set out in three columns across the door. Please call or email us if you would like to order this layout.
Garador purpose made side hinged doors are ordered by the OVERALL door and frame width and height. Please also have your brick to brick measurements to hand when clicking through to checkout so you can add them to the comments box.
* The Measure tab explains how to work out your overall ordering size step by step, complete with a worked example.
Garador Purpose Made Steel Side Hinged Door Options
These options apply to every made to measure Garador steel side hinged door. The panel designs, colours, and hardware are identical to the standard size doors, with the only differences being the custom sizing and the width limits on asymmetric splits.
Colour
Every door is powder coated in Traffic White (RAL 9016) as standard on both the inside and outside faces, with the steel frame finished to match. A further 18 factory powder coated colours are available at extra cost:
• Agate Grey RAL 7038
• Anthracite Grey RAL 7016
• Black RAL 9005
• Blue RAL 5005
• Burgundy Brown
• Chartwell Green
• Dark Brown RAL 8028
• Fir Green RAL 6009
• Golden Brown
• Green RAL 6005
• Light Grey RAL 7035
• Light Ivory RAL 1015
• Pigeon Blue RAL 5014
• Red RAL 3003
• Slate Grey RAL 7015
• Steel Blue RAL 5011
• Stone Grey RAL 7030
• Window Grey RAL 7040
* Colours on screen are a guide only. Please check against a physical RAL colour card if you are matching existing doors or windows.
Handles
• Black lever handle outside and inside: Included as standard for easy everyday opening from either side.
• Black plastic knob outside with lever inside: The fixed outside knob means the door can only be opened from the outside using the key, so it cannot be left accidentally unlocked.
• Anodised aluminium lever handles in White: Matching lever handles inside and out.
• Anodised aluminium lever handles in Chrome effect: Smart metallic lever handles inside and out.
On the inside, a central flip up handle on the fixed leaf releases both the top and bottom shoot bolts in one go, saving you reaching up to the top frame or bending down to the floor.
Leading Leaf
The leading leaf is the door you open first and the one fitted with the outside handle. The right hand leaf leads as standard when viewed from outside. A left hand leading leaf is available at extra cost if a wall, fence, or driveway layout makes the right hand side awkward to open.
Door Split
Purpose made steel doors are supplied with an equal 50/50 split as standard. A 1/3 and 2/3 split is available at the same price, depending on the door design and overall width:
• Carlton: 1/3 and 2/3 split available on any overall width up to 2234mm
• Georgian, Beaumont, Cathedral, and Beaumont with Windows: 1/3 and 2/3 split available at 2234mm overall width only
• Ascot: 50/50 split only
On a 1/3 and 2/3 door, the smaller leaf is always 800mm wide and always acts as the leading leaf. On the panelled designs, the pressings are set out in three columns with wider spacing. Please call or email us if you would like to order a 1/3 and 2/3 split.
Windows (Beaumont with Windows Only)
• Window style: Standard, Cross, or Diamond
• Glazing: Clear or stippled
• Window frames: White or brown as standard, or colour matched to the door at extra cost
Colour matched window frames are not available in Burgundy Brown or Golden Brown. On coloured doors ordered without the colour match option, standard white window frames can be painted on site.
Use
Suitable for domestic garages and lightweight commercial use.
Garador Purpose Made Steel Side Hinged Specification
Door Construction
Single skin high grade galvanised steel door panels built around a rigid welded steel box section chassis for strength and stability. Doors are factory powder coated in Traffic White (RAL 9016) inside and out as standard, with 18 optional powder coated colours available (see the Options tab for the full colour list).
Factory Framed
Door leaves are supplied factory pre framed ready for site installation, finished in the same colour as the door panels. The steel frame uprights are 75mm wide (150mm total width), the head section is 60mm high, and the frame is 75mm deep. These frame dimensions are included in your overall ordering size. Viewed from outside, the right hand leaf leads as standard and the left hand leaf is the fixed leaf (meaning the fixed leaf is on the right hand side when viewed from inside the garage).
Concealed Hinges
Heavy duty hinges are concealed neatly within the 75mm steel frame, with no hinge knuckles standing proud of the exterior door surface.
Two Point Shoot Bolt Locking and Floor Level
Internal shoot bolts are fitted at the top and bottom of the inner leading edge of the fixed leaf, and the active leading leaf locks tightly against it via a Euro cylinder lock and lever handle. The overlapping centre stile helps prevent forced entry to the locking system. Please note that the garage floor must be finished and level across the threshold for the bottom bolt to engage properly.
Door Stays and Gas Pistons
Solid metal door stays with a pull cord release hold the leaves securely open so wind cannot blow them shut, paired with hydraulic gas pistons on each door leaf for a smooth, controlled closing motion.
Weather Seals and Aluminium Threshold
Sturdy rubber weather seals are built into the door frame along the door stop and leading door leaf, sealing around three sides of the opening to help prevent draughts. A 20mm high aluminium floor threshold is supplied as standard for the base of the door.
Handles and Internal Release
A black lever handle is supplied on the right hand leading leaf as standard (viewed from outside), paired with a centrally located flip up handle on the inside of the fixed leaf that releases the top and bottom shoot bolts in one movement.
Purpose Made Size Range
- Carlton: 1930mm to 2539mm wide x 1891mm to 2196mm high overall (including steel frame)
- Ascot, Georgian, Beaumont, Cathedral, and Beaumont with Windows: 2234mm to 2539mm wide x 1991mm to 2196mm high overall (including steel frame)
Please see the Measure tab for step by step measuring guidance.
Fixing and Drive Through Clearance
These doors are designed for in between brickwork fixing, with a recommended minimum fitting clearance of 5mm per side. Fixing behind the brickwork opening is not recommended. With both leaves open to 90 degrees, the nominal drive through clearance is 30mm less than the nominal opening width (or 180mm less than the overall frame width) and 125mm less than the opening height.
Door Split and Outward Operation
Supplied as an equal 50/50 split as standard, with a 1/3 and 2/3 split available on selected designs and widths (see the Options tab). Both door leaves open outwards as standard, providing unrestricted ceiling and wall space inside the garage.
Standards and Use
All Garador garage doors are BS EN 13241 compliant to the latest safety standards and are suitable for domestic garages and lightweight commercial use.
* Because purpose made doors are manufactured to the exact overall dimensions you provide, please double check your brickwork measurements before ordering.
Installing a Purpose Made Garador Side Hinged Door
Your purpose made door arrives fully assembled and hung in its steel frame, built to the overall size you ordered. The hinges, handle, locking, stays and gas pistons are all fitted at the factory, so on site it's a case of fixing the frame into the opening. It's a job a competent DIYer can manage with a helper, or a local fitter can do it for you.
Installation instructions are supplied with every door.
Before You Fit
- Re measure the opening before fitting day and check it against your door size. The frame should go in with the fitting tolerance you allowed when ordering, around 10mm on the width and 5mm on the height
- A level, finished floor is essential, as the bottom shoot bolt drops into the floor to lock the fixed leaf
- The doors open outwards, so make sure there's clear, level ground in front of the garage for both leaves to open fully
- The frame is designed to fit between the brickwork. Fitting behind the reveals isn't recommended
- Check the brickwork either side can take fixings, especially on older properties where purpose made doors are most common
During Fitting
Fix the frame plumb and square, checking the diagonals. On older openings that aren't quite true, pack behind the frame at the fixing points rather than forcing it to follow the brickwork. A twisted frame stops the leaves meeting evenly and the seals closing properly.
Looking After Your Door
The door is factory finished and doesn't need painting. Wash it down with warm soapy water now and again, and clean off salt, bird droppings or anything corrosive promptly. Touch up any scratches straight away to stop corrosion. Lightly lubricate the hinges, lock and shoot bolts once or twice a year, using graphite powder rather than oil on the lock cylinder.
Garador Steel Side Hinged Door Warranty
Garador cover the safe and reliable function of their steel side hinged garage doors for 10 years from the date of purchase. A 5 year warranty applies to the hinges. Replacement parts are covered for 6 months, or to the end of the original warranty period, whichever is longer.
What's Covered
During the warranty period Garador will put right any defect that can be shown to be caused by a material or manufacturing fault. At their discretion they'll replace the faulty part, repair it or offer a reduction in price. The costs of removal, refitting and carriage aren't covered, and any replaced parts become the property of Garador Ltd.
Requirements
Warranty claims only apply in the country where the door was bought, the door must have been bought through Garador's authorised distribution, and the warranty only covers the door itself. You'll need the completed warranty card and your dated proof of purchase to make a claim.
What Isn't Covered
- Normal wear and tear
- Incorrect installation
- Lack of care and maintenance
- Incorrect use, at first or later on
- Deliberate or careless damage
- Fire, water, salts, alkaline solutions, acids and abnormal environmental conditions
- Damage in transport or fitting
- Priming and other surface treatments, including treatments applied incorrectly or too late
- Repairs by unqualified persons
- Use of non Garador parts without the manufacturer's approval
- Removal or defacing of the product number
Looking After the Finish
Minor scratches and marks aren't covered and should be touched up straight away to prevent corrosion. Touching up minor surface damage with a touch up spray or paint stick won't affect your warranty. Corrosive substances like salt should be washed off promptly.
Making a Claim
If you need to make a claim, please contact us with your name, address and phone number, your original invoice, the door type and product number, and a description of the problem. Garador may need to inspect the door in place. If the claim turns out not to be covered, the cost of the inspection visit may be charged.

Measuring for a Purpose Made Garador Steel Side Hinged Door
Purpose made doors are ordered by the overall width and overall height of the door including its steel frame, which comes factory fitted. The frame uprights are 75mm wide and the head is 60mm high.
Size Range by Design
| Model | Purpose made overall size range W x H |
|---|---|
| Carlton | 1930mm to 2539mm wide x 1891mm to 2196mm high |
| Ascot | 2234mm to 2539mm wide x 1991mm to 2196mm high |
| Georgian | 2234mm to 2539mm wide x 1991mm to 2196mm high |
| Beaumont | 2234mm to 2539mm wide x 1991mm to 2196mm high |
| Cathedral | 2234mm to 2539mm wide x 1991mm to 2196mm high |
| Beaumont with Windows | 2234mm to 2539mm wide x 1991mm to 2196mm high |
How to Work Out Your Ordering Size
- Measure the opening brick to brick across the width, at the top, middle and bottom. Use the smallest figure.
- Measure from the finished floor to the underside of the lintel, on both sides and in the middle. Use the smallest figure.
- Take at least 10mm off the width and 5mm off the height. These are total allowances, not per side. If the opening is out of square or the brickwork is uneven, allow a little more.
- The figures you're left with are your overall ordering width and height.
No fitting tolerance is added at the factory, so the door will be made to exactly the size you give us.
Choosing Your Size Online
Choose the width and height options your ordering size falls into, then enter your exact overall width and height when prompted.
| Width option | Covers overall widths |
|---|---|
| Up to 2234mm (Carlton only) | 1930mm to 2234mm |
| Up to 2384mm | 2235mm to 2384mm (from 2234mm on Ascot, Georgian, Beaumont, Cathedral and Beaumont with Windows) |
| Up to 2539mm | 2385mm to 2539mm |
| Height option | Covers overall heights |
|---|---|
| Up to 1990mm (Carlton only) | 1891mm to 1990mm |
| Up to 2041mm | 1991mm to 2041mm (Carlton from 1891mm on widths up to 2234mm) |
| Up to 2196mm | 2042mm to 2196mm |
Worked Example
Your brick to brick opening is 2300mm wide and 2150mm high. Take off the tolerance and your overall ordering size is 2290mm x 2145mm. Choose the up to 2384mm width option and the up to 2196mm height option, then enter 2290mm x 2145mm as your exact size.
Clear Opening Inside the Frame
The clear opening inside the frame is 150mm narrower and 60mm lower than your overall size. On a 2290mm x 2145mm door that's 2140mm wide x 2085mm high. With the leaves open, their thickness takes a little more off the usable width.
* If your ordering size matches one of the standard sizes exactly, for example 2234mm x 2041mm, check the standard size listing as it will usually work out cheaper.
* If you can't find the size you need in the drop down menus, please call or email us.
Our Promise
We pride ourselves on our customer service and are always happy to help












