Video of the side sliding sectional door in action!
The benefits of a Ryterna Side Sliding Sectional Door:
Insulated, space saving, made to order, safe remote operation, wicket door option, extra low maintenance and excellent performance.
The door panels slide vertically suspended from a high performing aluminium top rail. Consequently the guiding rail allows the door to pivot against the garages side wall.
Special design guiding rail, trolleys and threshold ensure smooth and reliable operation.
Manufacturered panels filled with Freon-free PU foam and brush seals around the perimeter of the door, which result in the doors having the best possible insulation and protection from the elements.
Ryterna Side Sliding Doors can open to either side. Also, for wider projects we recommend Bi-parting the garage doors. You can split the door in two even parts. The only limitation is there must be at least 3 panels on one side, approx. 1.5 metres wide. The high quality guide rails are both heavy duty and maintenance free. The threshold profile is mounted on top of the floor. The hardware is made from anodised aluminum and zinc plated steel. High quality trolleys with roller bearings ensure smooth and easy motion. Therefore Ryterna side sliding garage doors have excellent performance and long service life.
We recommend to split in 2 bi-parting doors for openings wider than 5 metres. Side sliding garage doors go behind reveal meaning that there is no frame required. With sliding garage doors you can retain full brick-to-brick daylight opening. As a result Ryterna developed aluminium lintel profile and post system. Elegant, easy to install and maintenance free profiles are the perfect solution. Furthermore aluminium profiles can be painted any colour to match garage door or house facade.
Standard Options
> Anodised aluminium hardware
> Zinc coated hardware
> Guiding rail for 120mm headroom
> Whole perimeter brush sealing
> Aluminium 120mm lintel profile
> Double glazed finger pinch proof panels
> Fixings for brick/timber/metal
Installation Depth D
(excluding door opener length)
| Side-room** |
Extension profile |
D |
Door opener installation position*** |
Operation |
| mm |
mm |
mm |
recommended |
|
| >500 |
no |
W* + 100 |
on lintel |
manual/opener |
| 500 - 301 |
400 |
W* + 600 |
on side wall |
manual/opener |
| 300 - 201 |
600 |
W* + 800 |
on side wall |
manual/opener |
| 200 - 150 |
1000 |
W* + 1250 |
on side wall only |
opener only |
* W - opening width
** min side-room on opening side
*** Operator movement range must be longer than W, if standard rail is too short use additional rail extensions. Please check for door opener specifications.
Lintel profile
> Standard option for fixing to lintel.
Option for fixing to ceiling will come with additional brackets and aluminium profile painted door colour.
> Additional lintel profile for side wall.
Adjustable door opener bracket
> For door opener installation on lintel or ceiling along opening.
Sideroom
> Standard sideroom > 500mm. Standard option. Bended guiding rail R420.
> Small sideroom ≤ 500mm. Bended guiding rail R520 + extension profile.
> Double SSD. x2 single side sliding doors. Min required headroom - 120mm. Min sideroom on closing side 70mm.
Warranty terms:
• The 10-year warranty is granted for Ryterna garage door sections from rust –through perforation, delamination, and disintegration.
• 5-year warranty is given for wearing parts such as springs, cables, drums, rollers, hinges on residential sectional garage doors TL, R40 under normal use of max 5 open-close cycles per day.
• 5-year warranty on springs, cables, drums, rollers, hinges on industrial sectional doors TLP under normal use up to 10 open-close cycles per day.
• Nonstandard color painted doors and doors cladded in Okoume, Retro, Alumax and other special design doors, the 2-year warranty period is applied.
• Visual inspection of door panels should be done at distance not less than 3m from the door.
• 2-year warranty for wearing parts of SH1, SH2 and SSD type doors.
Warranty is applicable only in the country where the door was purchased through the authorized distribution channels. To enable warranty claim to be proceeded, undersigned warranty card (in user manual) and original invoice with date of purchase should be provided.
The warranty does not cover:
• Mechanical damages due to improper transportation or portage.
• Mechanical damages due to improper installation, maintenance and operation.
• Normal wear and tear.
• Deflection of door sections because of heat absorption – Bi-metal effect (Dark color doors should be avoided to be exposed to direct sunlight).
• Color shade changes caused by natural environment influence.
• Humidity condensation.
• Damages caused due to improper storage of the product (in humid environment, outdoor, and (or) longer than 3 moths)
• Damages caused by absence of regular maintenance (proof-book registered)
• Damages due to use of non-origin parts.
• Damages caused due to external influences such as salt, fire, water, acids, alkali, abnormal environmental influences (e.g. salty water coastal regions)
• Warranty claim can be enabled only in presence of production number on the product.
Damages or defected goods should be claimed in 5 working days after delivery. Damages made during the transportation should be fixed at unloading. Report must be made before installation if door parts are damaged during transportation, have scratches or dents or missing parts.
Images must be attached with damaged parts still in the package. If sending close up image, please make sure to send another one from the distance, so that packaging could be seen.
Our Promise