Woodrite Washford (standard sizes) Up and over garage door Timber Cedarwood Woodrite

01926 463 888


Woodrite Washford (standard sizes) Timber-Cedarwood Up and Over
Woodrite
Woodrite Look at our customer reviews on trustpliot
Up and Over Timber-Cedarwood GEAR TYPE: Retractable - Masta, Retractable - Super

The Woodrite Timber Cedarwood Range of wooden garage doors are hand crafted in cedar mouldings, tongue and groove boards and cedar faced play for a timeless appeal.

1
Choose Your Sizes
Web Price from: £1,150.80 Inc. VAT
£959.00 Ex. VAT

The Woodrite Somerset Range is a classic 'entry level' range of timber garage door designs. They are panel built up and over garage doors made with selected cedar mouldings and cedar faced ply. Available with either Masta Gear or Super Chassis lifting gear.

Super Chassis
is a lightweight retractable gear suitable for all but the heaviest largest panel build doors. It features a very strong corrosion protected box section steel chassis into which the retractable lifting gear is incorporated. The timber door panel is built into this chassis and therefore offers superb total rigidity and durability. The timber panel designs are built with edge to edge timber at the front face covering the steel chassis frame. The lifting gear is the same gear as all the Hormann Series 2000 up and over doors. Canopy gear is available for doors up to 8 feet wide if required.

Masta Gear
is an 'all in one' solution for all doors in all sizes. Masta gear is a retractable operating gear fixing to an aluminium sub frame for panel built doors Single size retractable doors feature a cranked lifting side arm to enable increased drive htrough width when the door is open.
This is a belt and braces type gear which will give a considerable pricing advantage on door widths over 10 feet (3048mm) wide against the Super Chassis gear pricing.

All the ordering sizes refer to the internal dimensions of the sub frame.
If using a timber sub frame the width of the legs must be at least 70mm wide for the operating mechanism.

Domestic up and over timber garage doors.

Fully finished doors are also available in a range of colours:

Light Oak
Antique Oak
Chestnut
Mahogany
Walnut
Burnt Oak
Silver
Silver Grey
Ice Silver
Slate Grey

Handles:

Supplied with a black handle as standard and key operated lock to activate the multi point latches as standard for extra security.

Please note that if you require a light colour finish then the hardwood frame option is not suitable as the timber used is red meranti and is quite dark as a timber species in natural finish. Your best option if a true match is required is the cedar clad timber frame option as this gives an exact match to the cedarwood door panel finish.

Panel Constructed Doors
The Woodrite timber door panel is made first and then the aluminium sub frame and Masta operating gear is built onto the door panel. All doors have edge to edge timbers with no visible sub frame from the outside.

Installation Instructions are provided with every door.

Warranty

1. During the comprehensive 2 year guarantee period Woodrite undertake to repair or replace (at its discretion), and without charge, products or components which have suffered any form of manufacturing defect. Claims must be notified within 3 days from the date of delivery or within a reasonable time after discovery of any defect.
2. Products covered by these guarantees must have been purchased through an authorised Woodrite garage door supplier or as original equipment attached to a newly built dwelling.
3. The warranties shall apply for normal use only. Normal use constitutes no more than 5 operations (open/close cycles) per day.
4. The warranties offered attach to Woodrite product only and no consequential damages will apply no matter how caused.
5. No liability will be accepted as a result of normal wear and tear, incorrect storage, incorrect handling, faulty installation, incorrect use or wilful damage.
6. Claims under this guarantee must be made through the original supplier and accompanied by relevant documentation indicating the date of purchase (e.g. receipt).
7. Woodrite’s maximum liability shall be the original purchase price inclusive of Value Added Tax at the rate prevailing when supplied.
8. Any product which is the subject of a claim:
i) must have been correctly installed in accordance with the installation instructions supplied and thereafter properly maintained by a suitably experienced engineer on a regular basis as set out in the Maintenance and Operating Instructions provided with every door. (Additional copies of these instructions are available by contacting the installer or the manufacturing company). We recommend that regular maintenance is provided by a suitably experienced engineer.
ii) must have the manufacturers reference number still intact
iii) must not have been modified in any way.
9. Claims will not be accepted where the cause is due to:
i) impact or mechanical damage suffered during or following installation, e.g
scratches, indentations, tears, scuffs or other surface abrasion.
ii) damage or discolouration caused by contact with any form of caustic, abrasive or corrosive substance, fumes, bird droppings, fire, smoke, floodwater, salts, acids, or from exposure to abnormal atmospheric pollution.
10. The Exterior Finish Guarantee applies only to the weatherside surface and where more than 5% of the surface area of the door is affected. Surfaces must be freely exposed to washing by rainfall and kept clear of accumulated dirt and debris and given equal exposure to local environmental conditions and consistent natural lighting conditions across the face of the door. Special attention is drawn to Clause (9) (ii).
11. Basecoated timber doors are supplied with a dip immersion coat of Teknos low build matt water based basecoat of light oak. This operation is for temporary protection for transit and installation purposes only. If the timber panel becomes exposed to excessive water splashes or rain it may result in water marks or stains which could effect the final coating of the door. The topcoat finish must be applied immediately after installation to all surfaces. We recommend a Teknos high build microporous water based finishing stain or equivalent.
12. Fully finished RAL colours - Tannin bleed through is possible with Western Red Cedar on white and pale colours. Whilst Woodrite Doors Limited uses tannin blockers within the primer, Woodrite will not guarantee against this phenomenon.
13. Idigbo - The stain used will offer an up to 5 yr protection as per the normal
guarantee, within this time scale you will find that the colour may fade. This is a natural process and does not effect the protection of the stain.
14. Storage – All doors are delivered with cardboard and shrink wrap protection, this should remain in place until final finishing on site. Doors must always be stored in an upright position and protected from possible contaminations prior to fixing.
Do not store doors in direct sunlight. Do not puncture the polythene shrink wrap before installation. Do not expose doors to water contaminations, as staining may occur.
15. Attempted repairs by non-qualified individuals shall invalidate this guarantee.
16. The specific terms of this guarantee shall only apply to products purchased on or after September 2010 within the UK and Eire.
17. Woodrite garage doors and associated products are sold subject to the Woodrite’s Standard Terms and Conditions of Sale, copies of which are available upon request.
Woodrite shall not be liable as a result of any representation, implied warranty or other term or condition or for any consequential loss or damage, costs, expenses or other claims whatsoever except as expressly set out in these Terms and Conditions of Sale.

General Advice

Door Cleaning.

Periodically clean the door panel using warm water and a soft cloth or sponge. Allow to dry naturally. Never use detergent, abrasive, caustic or solvent based cleaners as they may damage the door surface. Bird droppings should be removed immediately as these can be particularly caustic.

Door Servicing and Maintenance
All doors should be operated and maintained in line with operating and maintenance instructions supplied with every door. Every six months visually inspect all wear items (including cables) for signs of wear. If wear is detected we recommend you contact your supplier to arrange for a replacement. Garage door springs are under extreme tension and should only be repaired or replaced by a suitably qualified engineer.

Our Promise

We pride ourselves on our customer service and are always happy to help

We use cookies to provide you with a better website experience. Close this popup to carry on browsing, or click here to find out more about cookies