Carteck XL Georgian (44 Colour Options) ELECTRIC OPERATOR INCLUDED Insulated Sectional Door garage door Steel Carteck

Carteck XL Georgian Insulated Sectional Garage Door

Size Range

The Carteck XL Georgian insulated sectional garage door is engineered for larger garage openings where a traditional raised panel look is required alongside modern performance.

• Maximum width (XL range): up to 6250 mm.
• Typical maximum height: up to around 2500 mm (project and configuration dependent).
• Ideal for large single openings, wide double garages and multi vehicle garages.
• Available in a selection of standard sizes.
• Made to measure XL Georgian doors can also be produced on application – please contact GarageDoorsOnline for tailored sizing and advice.

Door Construction

• Door type: automatic insulated sectional garage door.
• Design: Georgian cassette panel layout for a classic raised panel appearance across the door.
• Leaf construction: double skinned steel sections with “foamed in place” polyurethane insulation.
• Panel thickness: 40 mm insulated sections.
• Panel joints: interlocking, finger safe joints with integrated seals between the sections.
• Frame: galvanised steel frame legs and head section; optional colour matched frame cladding for between opening installations.

Thermal Performance and Weather Protection

• Insulated panel U value (panel only): approximately 0.56 W/m²K.
• Typical complete fitted door U value on standard sizes: approximately 1.3–1.5 W/m²K (size and installation dependent).
• 40 mm insulation helps to reduce heat loss and improve comfort in attached or part habitable garages.
• Continuous soft rubber sealing around the perimeter – vertical frame seals, top header seal and seals between the sections.
• Bottom seal: rot proof EPDM rubber floor seal to help take up minor unevenness at the threshold.
• Designed for good performance in air permeability, wind resistance and protection against driven rain.

Lifting Gear and Hardware

• Spring system: rear mounted torsion spring arrangement as standard on XL models.
• Hardware: strengthened roller brackets and reinforced panel profiles to handle XL door weights.
• Rollers: ball bearing rollers running in galvanised steel tracks for smooth and quiet operation.
• Guides and tracks: vertical guides and ceiling mounted horizontal tracks to give a true vertical lift and compact travel under the ceiling.
• Finger safe design at panel joints to help reduce the risk of trapping during movement.

Electric Operation

• Operation: supplied as an automatic sectional garage door as standard.
• Motor type: high output rail drive operator sized to suit the XL door weight and width.
• Power requirement: standard single phase 13 amp supply.
• Controls: normally supplied with remote control hand transmitters and an internal control point, with further controls available as required.
• Safety: built in force monitoring and automatic reversal if an obstruction is detected in the door path.

Safety and Standards

• Finger trap protection to the inside and outside of the panel joints.
• Balanced spring system for controlled, predictable movement through the full travel.
• Designed to comply with current European standards for powered garage doors (including EN 13241) when installed and commissioned correctly.

Finishes, Colours and Options

• Surface finish: Georgian cassette design is only available in a woodgrain external surface texture.
• Colours: classic white as standard with a wide choice of other colours from the Carteck range, many at no extra cost and some at additional charge.
• Glazing: optional window designs and layouts within the Georgian pattern are available on selected sizes to introduce natural light into the garage.

Installation Requirements

• Fitting positions: suitable for installation behind the reveal or between the reveals, subject to adequate structure and clearances.
• Headroom: a defined minimum headroom is required above the opening to accommodate the rear mounted torsion shaft, spring assembly, tracks and boom style electric operator (varies with size and configuration).
• Sideroom: minimum clear side space is needed on each side of the opening for the frame legs, fixings and brackets.
• Substrate: suitable for fixing to typical garage structures including masonry, concrete, blockwork and timber framing.

These specification details provide a general guide for the Carteck XL Georgian insulated sectional garage door; exact figures, clearances and options may vary slightly with door size, configuration and chosen operator package. Please contact GarageDoorsOnline for project specific guidance if you are unsure.

Options to Configure Your Door

Carteck XL insulated sectional doors are supplied as fully automatic doors as standard, so choosing your specification is mainly about the final appearance and how you would like to control the door.

• Door colour
  GarageDoorsOnline offer a choice of 44 beautiful factory finished colours for this door. Many colours are available at no extra cost, with a selection of special finishes and effects available at an additional charge.
• Panel surface textures
  Choose the external surface texture of the door panels to suit your property. There are four options available: Smooth, Woodgrain, Stucco and Micro profile.
• Frame finish
  The steel fixing frame legs and head section are supplied in white as standard. If you are fitting the door between your brickwork opening you can upgrade to have the frame factory finished in a colour to closely match the door panels for a more integrated look.
• Emergency external manual release
  If your garage door is the only access into your garage, we strongly recommend adding an external emergency manual release so that you can still open the door from outside in the event of a power cut.
• Control and access options
  As standard, the electric operator is supplied with two remote control handsets and an internal control button. There are many additional control options available, including alternative wall controls and access systems, so please contact us to discuss your requirements if the standard remote handsets are not sufficient for your needs.

Specifications – XL Georgian Insulated Sectional Garage Door

Size range

• Maximum width (XL range): up to 6250 mm, with typical maximum heights up to around 2500 mm (project dependent).
• Ideal for large single openings, wide double garages and multi‑vehicle garages requiring a traditional aesthetic.
• Available in a range of standard sizes or made‑to‑measure – contact GarageDoorsOnline for tailored sizing and advice.

Door construction

• Automatic insulated sectional garage door featuring a classic Georgian raised‑cassette design.
• Constructed with 40 mm thick double‑skinned steel sections and a “foamed in place” polyurethane core.
• Features interlocking, finger‑safe joints with integrated seals and a galvanised steel frame (optional colour‑matched frame available).

Thermal performance and weather protection

• Exceptional insulation with a panel U‑value of approx. 0.56 W/m²K, reducing heat loss in part‑habitable garages.
• Comprehensive weather protection via all‑round soft rubber seals and a rot‑proof EPDM bottom seal to accommodate minor floor unevenness.
• Engineered to deliver high performance in air permeability, wind load resistance and protection against driving rain.

Lifting gear and hardware

• Supported by rear‑mounted torsion springs, specifically calibrated as standard on XL models to manage larger door weights safely.
• Built with heavy‑duty roller brackets, reinforced panel profiles, and ball‑bearing rollers running in galvanised steel tracks for true vertical, low‑noise operation.

Electric operation and safety

• Supplied fully automatic as standard with a high‑output rail drive operator matched to the door's XL size.
• Includes integrated force monitoring and auto‑reverse functions to stop the door if an obstruction is detected, complying with EN 13241 standards.
• Typically operated via supplied hand transmitters, requiring a standard 13 A single‑phase power supply.

Finishes, colours and window options

• The Georgian panel design is exclusively available with a textured woodgrain surface finish to enhance the traditional styling.
• Choose from classic white, a wide selection of standard RAL colours, Trend colours, or specific wood‑effect finishes like Golden Oak and Rosewood.
• Windows can be incorporated into the upper Georgian cassettes to introduce natural light. Options include Rhombus Mullion, Cross Mullion, and Rectangular designs, featuring scratch-resistant polymer double glazing in clear, frosted or satin finishes. Please contact us for pricing and specifications.

Installation requirements

• Can be securely fixed to masonry, concrete or timber framing, either behind or between the structural reveals.
• Requires specific minimum headroom and sideroom clearances to accommodate the rear‑mounted torsion springs, frame legs and motor hardware.

These specification details provide a general guide for the Carteck XL Georgian insulated sectional garage door; exact figures, clearances and options may vary slightly with door size, configuration and chosen operator package.

Installation Guidance – XL Georgian Insulated Sectional Garage Door

Supplied as standard with a rear mounted torsion spring mechanism and boom style electric motor drive. The information below provides general installation guidance and key points to consider when preparing the opening and planning the fit. Installation instructins are provided with every door and available as a PDF download. There is also a generic video guide to show a door being installed and it is only the rear spring system differeing to other Carteck sectional door models

General installation requirements

• The door must be installed by a competent installer familiar with sectional garage door systems.
• The supporting structure (walls, lintel and ceiling) must be sound, level and capable of taking the fixing loads.
• The floor at the threshold should be as level as possible to allow the bottom seal to sit correctly and provide an effective weather barrier.
• All measurements should be checked carefully before ordering, including clear opening width, clear opening height, headroom and sideroom.

Headroom and sideroom

• Rear mounted torsion spring gear is fitted above the opening on the inside face of the garage.
• A minimum clear headroom is required to accommodate the spring shaft, cable drums and horizontal tracks (exact dimensions depend on door size and configuration).
• Sideroom is required on both sides of the opening for the frame legs, track brackets and fixings. Tolerances for fitting would be required when nstalling between the opening and possible some extra profiles for a clean finish on the surround.

Rear‑mounted torsion spring system

• The torsion spring shaft is installed along the rear of the lintel line, inside the garage, supported by secure brackets fixed to the structure.
• Springs are pre selected and set to match the weight and size of the XL door, ensuring balanced lifting and controlled movement.
• Lift cables run from the bottom corner brackets up to the cable drums on the spring shaft, providing smooth, even lifting across the full width of the door.
• Correct spring tensioning is essential for safe and reliable operation and must only be carried out using the appropriate tools and methods.

Track and frame installation

• Vertical frame legs are fixed either behind or between the reveals, depending on the chosen installation position and structure.
• Horizontal tracks are aligned with the vertical guides and secured to the ceiling or roof structure using suitable hangers and brackets.
• Tracks must be level, parallel and correctly positioned to ensure the door moves freely without binding or excessive play.
• All fixings should be checked and tightened to the recommended levels before commissioning the door.

Electric motor drive – standard

• The XL door is supplied as standard with an electric rail drive operator matched to the size and weight of the door.
• The motor unit is usually mounted to the garage ceiling, with the drive rail aligned centrally to the door and connected to the top panel via a carriage arm.
• A suitable 13 A single‑phase power supply is required, installed in accordance with current electrical regulations.
• Limit settings for open and closed positions are adjusted during commissioning so the door stops accurately at both ends of travel.
• Safety features such as force monitoring and auto‑reverse must be tested after installation to confirm correct operation.

Alignment, checks and commissioning

• Before first powered operation, the door should be tested manually to confirm smooth, balanced movement without catching or rubbing.
• Panel joints, hinges and rollers should be checked to ensure they are correctly seated in the tracks and free from obstruction.
• Once the motor is connected, open and close cycles should be run to fine‑tune limits and verify smooth acceleration and stopping.
• Safety stop and reverse functions must be tested using an appropriate obstruction to ensure compliance with safety requirements.

Ongoing maintenance after installation

• Fixings, brackets and track supports should be visually checked at regular intervals for tightness and signs of wear.
• Rollers, hinges and moving parts may require periodic lubrication with a suitable light oil or manufacturer‑approved product.
• The door surface and seals should be kept clean to maintain smooth operation and protect the finish.
• Any adjustments to the torsion spring system or major components should only be carried out by a trained installer or service engineer.

Because of the size and weight of the Carteck XL sectional door, professional installation is strongly recommended to ensure correct operation, full safety performance and long‑term reliability.

All Carteck insulated sectional garage doors supplied by GarageDoorsOnline are covered by Teckentrup’s 7 Point Warranty, giving you long term protection on key components when the door is installed and used correctly in normal domestic conditions.

• 2 year manufacturer’s guarantee on polymer and aluminium window units.
• 5 year manufacturer’s guarantee on SLX and GSA Vision windows, rollers, hinges, cable pulleys, cables and standard springs (up to 5 door open and close cycles per day, 2 year on Super Size doors).
• 10 year manufacturer’s guarantee on door panels against rust penetration from inside to outside.
• 10 year manufacturer’s guarantee against door panel separation of steel from foam.
• 10 year manufacturer’s guarantee on floor seal, intermediate seals, side seals and lintel seal against rotting.
• 10 year manufacturer’s guarantee on material and manufacturing defects of all non moving frame parts that make them unusable or seriously impair their function.
• 3 year manufacturer’s guarantee on coastal paint finishes (coastal paint upgrade only), covering peeling and blistering on the external face of the panels, excluding normal colour fading, staining or bleed from hardware.

Warranty cover applies only to qualifying Carteck sectional garage doors purchased in the United Kingdom via the authorised supply route and used within the stated duty cycle limits. A fully completed warranty certificate and dated sales receipt are required as proof of warranty; costs for removal, re installation, freight and postage are not included. For full terms, exclusions and maintenance requirements, please refer to the Teckentrup warranty document or contact GarageDoorsOnline for guidance before ordering.