Garador Ascot (19 Colour Options) Side hinged garage door Steel Garador

Garador Ascot Steel Side Hinged Garage Door, Purpose Made

The purpose made Ascot uses the exact same modern design as the standard size door, with flat steel faces and evenly spaced horizontal lines, built to the overall width and height of your opening. On a contemporary property the fit matters just as much as the door design. Ordering a purpose made size means you do not have to pack the frame out with wide timber battens or plastic trims down either side, so the clean lines of the Ascot run right up to the brickwork.

Where It Works Best

The made to measure Ascot is a popular choice for new extensions, self builds, and modernised homes where the builder has worked to metric brick dimensions rather than old imperial sizes, or on replacement jobs where the nearest standard door would be 30mm or 40mm too narrow.

Because most garages in the UK are now used for keeping bikes, tools, garden gear, or a chest freezer rather than parking a car, outward opening side hinged doors make day to day life much simpler. You can unlock and open just the leading leaf to walk in and out like a normal back door, while the full ceiling height inside the garage stays completely clear of tracks and springs.

• Made to your exact overall size, from 2234mm to 2539mm wide
• Made to measure heights from 1991mm to 2196mm overall
• Supplied fully assembled in a colour matched 75mm steel frame
• Black lever handles inside and out with two point shoot bolt locking
• Concealed hinges, rubber weather seals, and a 20mm aluminium threshold
• Gas pistons and metal door stays fitted to both leaves
• Traffic White (RAL 9016) as standard, with 18 other colours at extra cost

Built for a Clean Fit

The door leaves are made from galvanised steel panels fixed into a welded steel box section chassis and powder coated at the factory. Each pair arrives already hung in its own steel frame, which has 75mm wide uprights and a 60mm head. Because the hinges sit concealed inside the frame uprights, there are no hinge knuckles showing on the outside to break up the flat face of the door. The frame is designed to fit directly between the brickwork rather than behind it, sitting neatly inside the reveal.

Ordering Your Size

You order by the overall width and height of the door including the steel frame. Take your smallest brick to brick measurements across the opening, deduct a small fitting tolerance so you have room to level and pack the frame, and select the width and height price band your figures fall into before typing in your exact dimensions. The Measure tab has a clear worked example to follow.

Like the standard size model, the purpose made Ascot is only made as an equal 50/50 split. Keeping both leaves the same width ensures the horizontal lines run cleanly across the whole door.

* Please note: The Ascot cannot be made narrower than 2234mm overall width. If your garage opening is narrower than this, the purpose made Garador Carlton can be made down to 1930mm wide.

Garador Purpose Made Steel Side Hinged Door Options

These options apply to every made to measure Garador steel side hinged door. The panel designs, colours, and hardware are identical to the standard size doors, with the only differences being the custom sizing and the width limits on asymmetric splits.

Colour

Every door is powder coated in Traffic White (RAL 9016) as standard on both the inside and outside faces, with the steel frame finished to match. A further 18 factory powder coated colours are available at extra cost:

• Black RAL 9005
• Anthracite Grey RAL 7016
• Slate Grey RAL 7015
• Stone Grey RAL 7030
• Light Grey RAL 7035
• Agate Grey RAL 7038
• Window Grey RAL 7040
• Dark Brown RAL 8028
• Golden Brown
• Burgundy Brown
• Green RAL 6005
• Fir Green RAL 6009
• Chartwell Green
• Blue RAL 5005
• Steel Blue RAL 5011
• Pigeon Blue RAL 5014
• Red RAL 3003
• Light Ivory RAL 1015

* Colours on screen are a guide only. Please check against a physical RAL colour card if you are matching existing doors or windows.

Handles

• Black lever handle outside and inside: Included as standard for easy everyday opening from either side.
• Black plastic knob outside with lever inside: The fixed outside knob means the door can only be opened from the outside using the key, so it cannot be left accidentally unlocked.
• Anodised aluminium lever handles in White: Matching lever handles inside and out.
• Anodised aluminium lever handles in Chrome effect: Smart metallic lever handles inside and out.

On the inside, a central flip up handle on the fixed leaf releases both the top and bottom shoot bolts in one go, saving you reaching up to the top frame or bending down to the floor.

Leading Leaf

The leading leaf is the door you open first and the one fitted with the outside handle. The right hand leaf leads as standard when viewed from outside. A left hand leading leaf is available at extra cost if a wall, fence, or driveway layout makes the right hand side awkward to open.

Door Split

Purpose made steel doors are supplied with an equal 50/50 split as standard. A 1/3 and 2/3 split is available at the same price, depending on the door design and overall width:

• Carlton: 1/3 and 2/3 split available on any overall width up to 2234mm
• Georgian, Beaumont, Cathedral, and Beaumont with Windows: 1/3 and 2/3 split available at 2234mm overall width only
• Ascot and Windsor: 50/50 split only

On a 1/3 and 2/3 door, the smaller leaf is always 800mm wide and always acts as the leading leaf. On the panelled designs, the pressings are set out in three columns with wider spacing. Please call or email us if you would like to order a 1/3 and 2/3 split.

Windows (Beaumont with Windows Only)

• Window style: Standard, Cross, or Diamond
• Glazing: Clear or stippled
• Window frames: White or brown as standard, or colour matched to the door at extra cost

Colour matched window frames are not available in Burgundy Brown or Golden Brown. On coloured doors ordered without the colour match option, standard white window frames can be painted on site.

Use

Suitable for domestic garages and lightweight commercial use.

Garador Purpose Made Steel Side Hinged Specification

Door Construction

Single skin galvanised steel door panels built around a rigid welded steel box section chassis, powder coated in Traffic White (RAL 9016) inside and out as standard.

Factory Framed

Each door is built to your exact overall size and prehung in its own steel box frame at the factory, finished to match the door colour. The frame uprights are 75mm wide, the head is 60mm high, and the frame is 75mm deep. These frame dimensions are included in your overall ordering size. The right hand leaf leads as standard when viewed from outside.

Concealed Hinges

Heavy duty hinges are concealed neatly within the steel frame, with no hinge knuckles standing proud of the exterior door face.

Two Point Locking

Internal shoot bolts secure the fixed leaf at the top and bottom of the frame, and the leading leaf locks tightly against it via a Euro cylinder lock and lever handle. The overlapping centre stile helps prevent forced entry to the locking mechanism.

Door Stays and Gas Pistons

Solid metal door stays with a pull cord release hold the leaves securely open, paired with hydraulic gas pistons on each leaf for a smooth, controlled close.

Weather Seals and Threshold

Rubber weather seals are built into the steel frame along the door stop and leading leaf, sealing around three sides of the opening. A 20mm high aluminium floor threshold is supplied as standard for the base.

Handles

A black lever handle is fitted on the right hand side as standard (viewed from outside), paired with a central flip up handle on the inside of the fixed leaf to release the top and bottom shoot bolts in one movement.

Purpose Made Size Range

• Carlton: 1930mm to 2539mm wide x 1891mm to 2196mm high overall (including frame)
• Ascot, Windsor, Georgian, Beaumont, Cathedral, and Beaumont with Windows: 2234mm to 2539mm wide x 1991mm to 2196mm high overall (including frame)

Please see the Measure tab for step by step measuring guidance.

Door Split and Operation

Supplied as a 50/50 split as standard, with a 1/3 and 2/3 split available on selected designs and widths (see the Options tab). Both door leaves open outwards as standard.

Standards and Use

All Garador garage doors comply with BS EN 13241 safety standards and are suitable for domestic garages and lightweight commercial use.

* Because purpose made doors are manufactured to the exact dimensions you provide, please double check your brickwork measurements before ordering.

Installing Your Purpose Made Garador Steel Side Hinged Door

Your purpose made door arrives fully assembled and hung in its steel frame, built to the overall size you ordered. The hinges, handle, locking, stays and gas pistons are all fitted at the factory, so on site it's a case of fixing the frame into the opening. It's a job a competent DIYer can manage with a helper, or a local fitter can do it for you.

Installation instructions are supplied with every door.

Before You Fit

• Re measure the opening before fitting day and check it against your door size. The frame should go in with the fitting tolerance you allowed when ordering, around 10mm on the width and 5mm on the height
• A level, finished floor is essential, as the bottom shoot bolt drops into the floor to lock the fixed leaf
• The doors open outwards, so make sure there's clear, level ground in front of the garage for both leaves to open fully
• The frame is designed to fit between the brickwork. Fitting behind the reveals isn't recommended
• Check the brickwork either side can take fixings, especially on older properties where purpose made doors are most common

During Fitting

Fix the frame plumb and square, checking the diagonals. On older openings that aren't quite true, pack behind the frame at the fixing points rather than forcing it to follow the brickwork. A twisted frame stops the leaves meeting evenly and the seals closing properly.

Looking After Your Door

The door is factory finished and doesn't need painting. Wash it down with warm soapy water now and again, and clean off salt, bird droppings or anything corrosive promptly. Touch up any scratches straight away to stop corrosion. Lightly lubricate the hinges, lock and shoot bolts once or twice a year, using graphite powder rather than oil on the lock cylinder.

Garador Steel Side Hinged Door Warranty

Garador cover the safe and reliable function of their steel side hinged garage doors for 10 years from the date of purchase. A 5 year warranty applies to the hinges. Replacement parts are covered for 6 months, or to the end of the original warranty period, whichever is longer.

What's Covered

During the warranty period Garador will put right any defect that can be shown to be caused by a material or manufacturing fault. At their discretion they'll replace the faulty part, repair it or offer a reduction in price. The costs of removal, refitting and carriage aren't covered, and any replaced parts become the property of Garador Ltd.

Requirements

Warranty claims only apply in the country where the door was bought, the door must have been bought through Garador's authorised distribution, and the warranty only covers the door itself. You'll need the completed warranty card and your dated proof of purchase to make a claim.

What Isn't Covered

• Normal wear and tear
• Incorrect installation
• Lack of care and maintenance
• Incorrect use, at first or later on
• Deliberate or careless damage
• Fire, water, salts, alkaline solutions, acids and abnormal environmental conditions
• Damage in transport or fitting
• Priming and other surface treatments, including treatments applied incorrectly or too late
• Repairs by unqualified persons
• Use of non Garador parts without the manufacturer's approval
• Removal or defacing of the product number

Looking After the Finish

Minor scratches and marks aren't covered and should be touched up straight away to prevent corrosion. Touching up minor surface damage with a touch up spray or paint stick won't affect your warranty. Corrosive substances like salt should be washed off promptly.

Making a Claim

If you need to make a claim, please contact us with your name, address and phone number, your original invoice, the door type and product number, and a description of the problem. Garador may need to inspect the door in place. If the claim turns out not to be covered, the cost of the inspection visit may be charged.

Measuring for a Purpose Made Garador Steel Side Hinged Door

Purpose made doors are ordered by the overall width and overall height of the door including its steel frame, which comes factory fitted. The frame uprights are 75mm wide and the head is 60mm high.

Size Range by Design

How to Work Out Your Ordering Size

1. Measure the opening brick to brick across the width, at the top, middle and bottom. Use the smallest figure.
2. Measure from the finished floor to the underside of the lintel, on both sides and in the middle. Use the smallest figure.
3. Take at least 10mm off the width and 5mm off the height. These are total allowances, not per side. If the opening is out of square or the brickwork is uneven, allow a little more.
4. The figures you're left with are your overall ordering width and height.

No fitting tolerance is added at the factory, so the door will be made to exactly the size you give us.

Choosing Your Size Online

Choose the width and height options your ordering size falls into, then enter your exact overall width and height when prompted.

Worked Example

Your brick to brick opening is 2300mm wide and 2150mm high. Take off the tolerance and your overall ordering size is 2290mm x 2145mm. Choose the up to 2384mm width option and the up to 2196mm height option, then enter 2290mm x 2145mm as your exact size.

Clear Opening Inside the Frame

The clear opening inside the frame is 150mm narrower and 60mm lower than your overall size. On a 2290mm x 2145mm door that's 2140mm wide x 2085mm high. With the leaves open, their thickness takes a little more off the usable width.

* If your ordering size matches one of the standard sizes exactly, for example 2234mm x 2041mm, check the standard size listing as it will usually work out cheaper.

* If you can't find the size you need in the drop down menus, please call or email us.