Seceuroglide LT with Full Hood Woodgrain Finish (5 Colour Options) Special Offer Fast Delivery Insulated Roller door garage door Aluminium Seceuroglide

The Seceuroglide LT Fast Delivery Electric Roller Door with Full Hood (Woodgrain Finishes)

The Seceuroglide LT is an electric, insulated roller garage door designed for homeowners who want the established build quality of the Seceuroglide brand, but don't necessarily need the maximum-security features of the Original or Excel models. This specific fast-track version includes a full hood box and is offered in 5 textured woodgrain finishes, with delivery in just 10 working days (subject to location). It provides a reliable, made-to-measure replacement door that complies fully with all UK safety regulations.

Suitability & Full Hood Benefits

Because it rolls tightly vertically, you can park right up to the door both inside and outside the garage, maximising your driveway space. The inclusion of the full hood box makes this door incredibly versatile. While you can still install it internally, the full hood completely encloses the door roll, meaning it can be safely installed externally (on the outside face of the garage) or 'in-between' the structural brickwork without the mechanics being exposed to the weather or looking untidy.

Textured Woodgrain Finishes

This specific offer is for the textured woodgrain finishes. These finishes use a high-quality foil laminate applied to the exterior of the aluminium slats to replicate the visual appearance of natural timber, allowing you to coordinate the garage door with existing UPVC windows or front doors. You can choose from 5 attractive woodgrain options:

• Golden Oak
• Rosewood
• Mahogany
• White Woodgrain
• Black/Brown Woodgrain

* Please note that woodgrain finishes are applied to the external face only; the internal face of the slats will be a standard brown or white finish.

Practical Features

The LT operates effortlessly at the touch of a button. It comes supplied with the tried and tested SeceuroSense Plus control unit, which features a built-in long-lasting LED courtesy light that illuminates your garage when the door is operated, switching off automatically after a few minutes.

• Effortless electric operation with two remote control key fobs included
• Fully compliant bottom edge safety sensor that stops and reverses the door if it detects an obstruction
• Internal manual override included as standard for use during power cuts
• Full aluminium box completely conceals the roll for a neat finish inside or out

Technical Specifications

Manufactured in the UK, the LT uses strong 78.5mm high twin-walled aluminium slats filled with CFC-free foam insulation, which helps keep the cold out and reduces noise transmission. The door runs in extruded aluminium guide rails fitted with dense brush strips to minimise draughts. It's powered by a reliable SeceuroDrive tubular motor, though you have the option to upgrade to a Somfy motor if preferred.

* Unlike the Original Seceuroglide, the LT model uses a standard locking system and aluminium end plates rather than steel, and it does not feature the webbing system connecting the slats.

Installation Considerations

With the full hood included, you have three installation options:

• Internal Face Fix: Installed behind the opening. The guide rails and box sit inside the garage
• External Face Fix: Installed on the outside of the opening. Ideal if internal headroom is severely restricted. The full hood protects the roll from the elements
• Reveal Fix (In-between): Installed within the brickwork opening itself. The full hood ensures a neat finish from both sides, though this method will reduce your drive-through width and height

Whichever method you choose, a level floor is essential to ensure the rubber weather seal on the bottom slat compresses evenly across the full width.

Use Case Guidance

The Seceuroglide LT is an excellent, cost-effective choice for the average family home where a reliable, insulated electric door is needed quickly. If you want the aesthetic appeal of a timber-effect door with the low maintenance of aluminium, this woodgrain version with the full hood offers fantastic value and versatility.

How to Order and Choose Your Options

Ordering your made-to-measure Seceuroglide LT roller garage door with a full hood is a simple process. Because this model includes the full hood box as standard, it gives you greater flexibility in how the door can be installed. Below is a guide to help you understand the options available and how to select them.

Step 1: Choosing Your Size

All Seceuroglide LT doors are manufactured to your exact millimetre measurements. To get the correct price bracket, you first need to select the nearest 'up to' width and height from the dropdown menus.

• Width: Choose the 'up to' size that covers your total over-guide width. This is your structural opening width plus the width of the guide rails (either 75mm or 90mm per side, depending on the door size)
• Height: Choose the 'up to' size that covers your guide height. This is typically the height of your structural opening, not including the roll assembly above

Once you've selected the correct price bracket, simply type your exact ordering measurements (in millimetres) into the boxes provided. The door will be manufactured precisely to those dimensions.

Step 2: Curtain Colour (Woodgrain Foil)

This specific fast-delivery offer is for the Seceuroglide LT finished in a textured woodgrain foil. These high-quality laminated finishes provide the visual appearance of natural timber without the maintenance. You can choose from 5 options:

• Golden Oak
• Rosewood
• Mahogany
• White Woodgrain
• Black/Brown Woodgrain

* Please remember that the woodgrain foil finish is applied to the external face of the door only. The internal face of the slats will be supplied in a standard brown or white finish.

Step 3: Guide Rail & Box Colour

The extruded aluminium guide rails and the full hood box are supplied in either a smooth white or brown powder-coated finish as standard. While they cannot be finished in the textured woodgrain foil to exactly match the curtain, choosing a complementary brown finish is a popular choice for timber-effect doors.

Step 4: Motor Position

You need to specify which side the SeceuroDrive motor should be located on. This is always determined by viewing the door from the inside of the garage looking out. The motor side also dictates where the internal manual override mechanism will be positioned, so it's important to choose the side that offers the easiest access in your garage during a power cut.

Step 5: Installation Position

Because this version includes the full hood box, you have three options for how the door can be installed:

• Face Fit Internally: The guide rails and box fix to the inside wall of the garage, behind the brickwork opening. This is the most common installation method, keeping the mechanics fully protected inside
• Face Fit Externally: The guide rails and box fix to the outside face of the garage. This is ideal if you have very restricted headroom inside the garage. The full hood protects the rolled-up curtain and motor from the weather
• In-between Fit (Reveal Fix): The guide rails and box fit securely between the structural brickwork of the opening itself. The full hood ensures a neat, finished look from both the inside and outside, but this method will reduce your usable drive-through width and height

Step 6: Low-Level External Manual Override

An internal manual override crank is supplied as standard to allow you to open the door from the inside during a power failure. However, if the roller door is the only way into your garage (meaning there is no side pedestrian door or internal door from the house), an external low-level manual override is essential.

This option provides a secure, lockable access point on the outside of the garage, allowing you to manually wind the door open if the power fails. It is suitable for walls up to 500mm thick. If you are ever locked out without power, this override ensures you can still get your car out.

Detailed Specifications & Ordering Guide

The Seceuroglide LT has been designed to offer a fully compliant electric insulated roller garage door at a highly competitive price. This specific model includes a full hood box as standard and is supplied in a choice of textured woodgrain finishes. Below are the key technical specifications to help you understand the product before ordering.

Measuring and Ordering

Understanding the ordering sizes is key to ensuring your new door fits perfectly. The 'up to' sizes referred to in the pricing are the overall door and guide width combined (over guides), and the guide height required without the roll above.

For example, to price a door for an opening 2300mm wide and 2200mm high (assuming you are installing the roller door on the inside face of the garage opening), you need to specify a door 2450mm over guides and 2200mm in guide height for pricing. This is calculated by taking your 2300mm opening width and adding 75mm for each guide rail (150mm total). In this scenario, you would select 'Up to 2600' for the width and 'Up to 2200' for the height from the dropdown menus.

The Full Hood Box & Guide Rails

Because this model includes the full hood box, it completely conceals the rolled-up curtain from both the inside and outside, giving a much neater finish and protecting the mechanics. This allows the door to be fitted internally, externally, or 'in-between' the structural opening.

• Hood Construction: Manufactured from roll-formed aluminium, supplied fully made up in either one or two sections (a 90-degree fascia and a 45-degree lid)
• Guide Rails: The door is supplied with 75mm guide rails for doors up to 4500mm wide. For larger doors over 4500mm wide, it comes with 90mm guide rails for added stability
• Box and Guide Colours: The hood box and guide rails are supplied in white or brown as standard. They can be powder-coated in other plain colours for a surcharge, but please note they cannot be finished in the textured woodgrain foil to match the curtain

Electric Operation and Control

The door is powered by a reliable SeceuroDrive economy tubular motor as standard, operating at 15RPM (or 12RPM for larger doors). You operate the door using the SeceuroSense Plus control unit, which acts as a receiver and push-button control station.

• Remote Control: Open your door without leaving the car. Two remote control transmitters using secure rolling code technology are included
• Courtesy Light: Making your garage a safer place when parking at night, the SeceuroSense Plus unit combines a built-in LED courtesy light with both remote and push control functions. The light activates automatically when the door is operated
• Peace of Mind: A special 'Vacation Mode' can be activated using your hand transmitter. This disables the control panel on the wall unit, preventing an intruder from operating the door from the inside if they manage to break into the garage via a window or side door

Safety and Security Features

• Secure Locking: A standard locking strap system attaches the curtain to the 70mm axle, securing the door shut when fully closed
• Safety Bottom Edge: A fully compliant pressure-sensitive safety bottom edge is included as standard. This stops and reverses the door if it meets an obstruction
• Wireless Safety Brake: Doors weighing over 26.5kg will be supplied with an anti-fallback safety device (safety brake). This will prevent the curtain from falling in the unlikely event of a motor failure
• Dummy End: LT doors weighing less than 26.5kg will be supplied with a dummy end rather than a safety brake, which is standard practice for lighter curtains

Curtain Construction & Finishes

• Aluminium Slats: The curtain is constructed from CD77 twin-walled aluminium slats, insulated with CFC-free foam to reduce heat loss and sound transmission. The slats are nominally 78.5mm high x 17mm thick
• Bottom Slat: For additional strength, the door features a 77mm extruded aluminium bottom slat which incorporates a 25mm deep rubber seal to help prevent water ingress and draughts
• Textured Woodgrain Finishes: This specific fast-delivery offer applies to 5 textured woodgrain finishes. These are applied using a foil laminate for a realistic timber appearance. Options include Golden Oak, Mahogany, Rosewood, White Woodgrain, and Black/Brown Woodgrain

Practical Benefits

• Power Cuts - No Problem!: Every SeceuroGlide LT comes supplied with a simple internal manual override crank, ensuring you will never be accidentally locked in your garage during a power failure
• Space Saving: The vertical lift and tight coiling of the aluminium slats leave more headroom and storage space inside your garage

Optional Extras

• External Low-Level Manual Release: An essential item if your roller door is the only means of access into the garage. This allows you to engage the manual override from the outside during a power cut
• Sloping Bottom Slat: If your driveway slopes across the width of the opening, a sloped bottom slat is available to accommodate inclines of up to 250mm. Please contact us directly to discuss your requirements for this option

Installation Guidance

The Seceuroglide LT fast delivery electric roller garage door is a straightforward installation for anyone with strong DIY skills, but it's important to understand the process before you begin. As this specific model is supplied without a hood box, it is primarily designed for an internal face-fix installation.

Before You Start

• Check Your Opening: Ensure the structural opening is square and plumb. Measure the diagonals to check for any significant differences. A level floor is also essential, as the bottom slat's rubber weather seal needs to sit flush to prevent draughts and water ingress
• Headroom: You must have a minimum of 300mm of clear headroom above the structural opening to accommodate the endplates and the rolled-up curtain. Without a hood, the roll will be visible from inside the garage
• Sideroom: Check that you have enough space on the internal walls (the reveals) either side of the opening to fix the guide rails. You'll need 75mm per side for doors up to 3000mm wide, and 90mm per side for larger doors
• Power Supply: You will need a suitable 13-amp fused spur located near the motor side of the door to power the SeceuroSense Plus control unit

Fitting the Guide Rails

The guide rails are fixed to the inside face of the garage wall. It is absolutely critical that these are installed perfectly vertical and parallel to each other. Use a long spirit level to ensure accuracy. If the guides are out of plumb, the door curtain will bind and not run smoothly, which can damage the motor over time. Fix the guides securely using appropriate fixings for your wall type (brick, block, or timber).

Installing the Axle and Motor

The axle assembly, which houses the SeceuroDrive tubular motor, sits on the endplates above the guide rails. This is a heavy component and will require two people to lift it safely into position. Ensure the axle is perfectly level before securing it to the endplates. The motor cable will need to be routed neatly to the SeceuroSense Plus control unit.

Hanging the Curtain

The aluminium curtain slats are supplied rolled up. Carefully lower the curtain into the guide rails, ensuring the nylon endlocks slide smoothly into the channels. Once the curtain is in the guides, attach it to the axle using the provided locking straps. These straps are designed to secure the door firmly when closed, preventing it from being lifted.

Setting the Limits and Control Unit

The SeceuroSense Plus control unit must be mounted securely to the wall. The motor limits (the points where the door stops when fully open and fully closed) need to be set according to the manufacturer's instructions. The SeceuroSense Plus board features a built-in test lead specifically for this purpose, making the initial setup much easier. Once the limits are set, the safety bottom edge must be connected and tested to ensure the door reverses when it meets an obstruction.

Manual Override Setup

Every Seceuroglide LT comes with an internal manual override crank. This needs to be hooked up to the motor head so you can operate the door manually in the event of a power cut. If you have specified an external low-level manual override (because you have no other access to the garage), this will involve drilling a hole through the garage wall to connect the external lockable plate to the internal override mechanism.

Important Reminders

• Always allow a small amount of fitting tolerance when measuring your opening
• Do not operate the door electrically until the motor limits have been properly set and the safety edge is functioning correctly
• If you have opted for an 'in-between the opening' installation rather than the standard internal face-fix, you will likely need to add some cladding or a fascia board to conceal the exposed back of the door roll from the outside
• If you are unsure about the electrical connections or the physical installation, we strongly recommend hiring a professional garage door installer

Details on the SeceuroDrive Motor Limit Setting Instructions can be watched here.

Please Note: Important Information when installing the Seceuroglide LT Roller Doors.

In the absence of the spring we apply an LT dummy end. This has an adjustable shaft in it. This is designed to be moved so the axle becomes the right size. This is stiff to pull but once its moved it moves freely. This then slots in to the bracket as normal.

For  doors which have been supplied with a dummy end, the bearing will no longer be welded to the end.   Instead, the bearing will now be located within the accessory box and will need to be installed manually.

To install the bearing, simply slide the bearing ontl the end of the dummy end shaft.

Warranty Information

The Seceuroglide LT electric roller garage door is backed by a comprehensive manufacturer's warranty from SWS UK, providing you with long-term peace of mind. As the retailer, Garagedoorsonline.co.uk is your first point of contact for any warranty queries or claims, and we will liaise directly with the manufacturer on your behalf.

What's Covered

The Seceuroglide LT comes with specific warranty periods depending on the component, subject to correct installation, normal operation, and regular maintenance.

5-Year Comprehensive Warranty

The core components of the door are guaranteed against defects in materials and workmanship for a period of 5 years from the date of purchase. This includes:

• The Aluminium Curtain: The insulated slats and powder-coated solid colours are warranted against excessive fading, peeling, and manufacturing defects under normal use
• The Drive System: The standard SeceuroDrive tubular motor, or the optional Somfy motor upgrade, is covered against mechanical failure
• The Control System: The SeceuroSense Plus receiver unit, the remote control key fobs, and the safety bottom edge sensor are covered against electrical and component failure
• Hardware: The guide rails, endplates, axle assembly, and locking straps are covered against structural failure

10-Year Finish Guarantee (Laminate Foil Woodgrain Only)

If you choose one of the textured laminate foil woodgrain finishes, the surface finish of the curtain slats benefits from an extended 10-year guarantee against peeling and significant discolouration. Please note this extended finish warranty applies exclusively to the foiled woodgrain options, not the standard powder-coated or painted finishes.

What's Not Covered

To ensure your warranty remains valid, it's important to understand the exclusions. The warranty does not cover:

• Incorrect Installation: Damage or failure caused by the door not being installed in accordance with the manufacturer's fitting instructions. This includes issues arising from fitting the door into an opening that isn't square or plumb, or failing to set the motor limits correctly
• Wear and Tear: General wear and tear from everyday use, including minor cosmetic marking on the internal face of the slats over time. This marking is a known characteristic of roller doors and occurs as the curtain rolls up and down
• Accidental Damage: Scratches, dents, or structural damage caused after delivery, including impact from vehicles or forced entry attempts
• Lack of Maintenance: Failure of components due to a lack of basic maintenance, such as neglecting to clean the guide rails or ignoring obvious faults
• Shade Variations: Minor shade differences between the powder-coated curtain slats, bottom rail, and guide rails are normal and not considered a manufacturing defect
• Water Ingress: While the door provides excellent weather protection, it is not guaranteed to be 100% watertight in extreme weather conditions or driving rain, particularly if the floor is not perfectly level

Making a Warranty Claim

If you experience an issue that you believe is covered under warranty, please contact us at garagedoorsonline.co.uk as soon as possible. To process your claim efficiently, we will need:

• Your original order number and date of purchase
• A clear description of the fault
• Photographs or a short video demonstrating the issue, if applicable
• Details of who installed the door (e.g., DIY or professional installer)

In many cases, replacement parts (such as a new remote fob or a control board component) can be sent directly to you to resolve the issue quickly without needing to return the entire door.

Maintaining Your Warranty

To keep your door running smoothly and your warranty valid, we recommend a simple maintenance routine:

• Keep the guide rails clean and free from dirt, leaves, and debris to prevent the curtain from jamming
• Wash the curtain periodically with warm, soapy water and a soft cloth to protect the paint finish
• Regularly check that the safety bottom edge is functioning correctly by placing an object in the door's path while it is closing
• If the door starts making unusual noises or struggling to open/close, stop using it and investigate the cause to prevent damage to the motor

* Please note that this warranty is provided by SWS UK as the manufacturer. Garagedoorsonline.co.uk acts as the retail seller and your first point of contact. Your statutory rights as a consumer are not affected by this warranty.

Measuring Guidance

Because every Seceuroglide LT roller garage door is manufactured to your exact millimetre measurements, getting the sizing right before you order is the most important step. As this fast-delivery model is supplied without a hood box, it is primarily designed to be fitted internally, behind the structural opening (a face-fix installation).

Step 1: Check Your Opening

Before taking any measurements for the door itself, check the condition of your garage opening. It needs to be structurally sound and capable of supporting the weight of the guide rails and the door roll. Measure the diagonals of the opening to ensure it is square. If it's significantly out of square, the guide rails will not sit flush, and the door will not operate correctly.

Step 2: Measure the Structural Opening

Take three measurements for both the width and the height of your brickwork opening (top, middle, and bottom for the width; left, centre, and right for the height). Use the narrowest width and the shortest height as your baseline measurements.

• Opening Width: This is the distance between the two side walls (the reveals) of your garage opening
• Opening Height: This is the distance from the floor to the underside of the lintel (the top of the opening)

A level floor is essential for a roller door. If your floor slopes across the width, you will need to request a sloping bottom slat (available as an optional extra) to ensure the door seals properly when closed.

Step 3: Check Your Clearances

For an internal face-fix installation, you need to ensure you have enough room inside the garage to accommodate the door mechanism.

• Sideroom: You need enough flat, vertical space on the inside walls (the returns) on either side of the opening to fix the guide rails. For doors up to 3000mm wide, you need a minimum of 75mm on each side. For doors over 3000mm wide, you need a minimum of 90mm on each side
• Headroom: You need a minimum of 300mm of clear headroom above the structural opening (from the underside of the lintel up to the ceiling or first obstruction). This space is required for the endplates and the rolled-up door curtain

Step 4: Calculate Your Ordering Sizes

When placing your order on our website, you need to provide two specific measurements: the Over Guide Width and the Guide Height.

1. Over Guide Width (The Ordering Width)

This is the total width of the door, including the guide rails on both sides. To calculate this, take your structural opening width (the narrowest measurement from Step 2) and add the width of the guide rails.

• If your door will be up to 3000mm wide: Add 150mm (75mm for each guide rail) to your opening width
• If your door will be over 3000mm wide: Add 180mm (90mm for each guide rail) to your opening width

Example: If your brickwork opening is 2200mm wide, your Over Guide Width for ordering is 2350mm (2200 + 75 + 75).

2. Guide Height (The Ordering Height)

This is the height of the guide rails themselves, which typically matches your structural opening height (the shortest measurement from Step 2). You do not need to add the 300mm headroom requirement into this measurement; the factory will automatically add the endplates and door roll above the guide height you specify.

Example: If your brickwork opening is 2100mm high, your Guide Height for ordering is 2100mm.

Important Notes for Ordering

* Always measure in millimetres for accuracy. Never round up or down unless you are intentionally allowing for fitting tolerance.

* If you are planning an 'in-between the opening' installation rather than the standard internal face-fix, the measuring process is different. In this case, your Over Guide Width will be exactly the same as your structural opening width (minus a few millimetres for fitting tolerance), and your Guide Height will be your structural opening height minus the 300mm required for the door roll. Please note that this installation method will significantly reduce your drive-through width and height.