Seceuroglide LT with No Hood (21 Colour Options) Insulated Roller door garage door Aluminium Seceuroglide

The Seceuroglide LT is a stripped down version of the standard Seceuroglide.
It is designed to offer a fully compliant electric insulated roller garage door at a most competitive price in situations where security is not a particular issue.

The UK market has many roller door manufacturers selling low specification roller doors and many are not compliant with regulations but if price is your main consideration then this door will fit the bill.

The door still uses a bottom edge safety sensor rather than the illegal infra red beams and has 2 transmitters supplied for remote operation using 'rolling code' technology. The internal receiver and control box has a built in courtesy light operating when the door is opened and switching off automatically after a few minutes.

Courtesy Light: Making your garage a safer place when parking at night SeceuroGlide LT utilises the tried and tested SeceuroSense Plus control unit, which combines a courtesy light with both remote and push control functions.

SeceuroSense Plus Control Unit
> Integral alarm available as an optional extra, housed within the board.
> Improved cable and panel access points allow neater and more efficient installations and repairs.
> Long lasting LED courtesy light.
> Clear fault diagnosis on front cover with LED indicator lights.
> No more need for magnets with built-in ground exclusion.
> Ability to programme modes without the need to remove the front cover.
> Limit setting direct from the board through built-in test lead for ease of installation.
> Seperate lighting feed (up to 300W) integral to the board.

The curtain slats are a high quality double skinned, foam filled aluminium and available in various finished colours.

Internal manual override is standard for power failures and is on the same side as the motor unit which can be specified when ordering.

PLEASE NOTE: In the absence of A spring SWS apply an LT dummy end. This has an adjustable shaft in it. This is designed to be moved so the axle becomes the right size. This is stiff to pull but once its moved it moves freely. This then slots in to the bracket as normal.

Domestic garage and low use commercial applications

The Seceuroglide LT Roller doors have 75mm guides up to 3000mm wide and 90mm guides for all doors over 3000mm wide. These guides come in white or brown as standard.

The 'up to' sizes referred to in the pricing are the overall door and guide width sizes including the side guides and the guide height required without the roll above. So to price a door for an opening 2300mm wide and 2200mm high assuming your are installing the roller door on the inside face of the garage opening you need to specify a door 2450mm over guides and 2200mm in guide height for pricing. Use the 'Up to 2600' for the width and 'Up to 2200' for the height in this example.

Operation:
Economy motor - remote control with bulk head courtesy light and two transmitters.
Safety bottom edge is included as standard.

A choice of low maintenance colours to choose are as follows:
Burgundy  RAL3004
Navy Blue  RAL5011
Light Beige  BS08B17
Brown RAL8014
Fir Green RAL6009
Black RAL9005
White  RAL9016
Duck Egg Blue  BS 16C33
Chartwell Green BS14C35
Anthracite  RAL7016
Graphite  RAL7024
Golden Oak
Irish Oak
Moss Green RAL6005
Slate Grey RAL7015
Ivory  RAL1015
Light Grey  RAL7038
Rosewood
Dark Brown RAL8019
Window Grey
Grey Aluminium

Secure Locking
A unique end plate system secures the door shut every time and means the door cannot be lifted open.

Space Saving
Tighter, space-saving coiling leaves more space in your garage door for you.

SeceuroDrive
SeceuroDrive range of powerful motors make a reliable choice for the SeceuroGlide roller garage doors.

Power cuts - No Problem!
Every SeceuroGlide LT comes supplied with a simple manual override crank, ensuring you will never be accidentally locked in your garage – even in a power cut.

Courtesy Light
Making your garage a safer place when parking at night SeceuroGlide LT utilises the tried and tested SeceuroSense control unit, which combines a courtesy light with both remote and push control functions.

Remote Control
Open your door without leaving the car.

Peace of Mind
A special Vacation Mode activated by your hand transmitter prevents an intruder from operating the door from the inside using the receiver unit’s control panel.

Maximum Weather Protection
SeceuroGlide LT is engineered to block cold draughts and keep your garage warm and usable with guide rails that are lined with a dense brush strip and a shaped rubber seal on the bottom slat.

Installation Position
The Seceuroglide LT Roller doors are supplied with no box as standard. If Inbetween the Opening Installation is required, please note that some cladding may be required to cover the back side of the roll as this may be exposed with a between fix installation.

Wireless Safety Brake
Doors weighing over 26.5kg will be supplied with a wireless safety brake. This will prevent the door falling in the case of a motor failure.   
LTs weighing less than 26.5kg will be supplied with a dummy end.

External low level manual release
An essential item for internally installed roller doors with no other means of access into the garage. Suitable for walls 500mm thick as standard, if the wall is thicker the 7mm Hex bar will need extending on site.

Sloping Bottom Slat
Please contact us to discuss requirements. This is designed to fit on inclines of up to 250mm.

Installation instructions are provided with every LT roller door ordered.

Please Note: Important Information when installing the Seceuroglide LT Roller Doors.

In the absence of the spring we apply an LT dummy end. This has an adjustable shaft in it. This is designed to be moved so the axle becomes the right size. This is stiff to pull but once its moved it moves freely. This then slots in to the bracket as normal.

For  doors which have been supplied with a dummy end, the bearing will no longer be welded to the end.   Instead, the bearing will now be located within the accessory box and will need to be installed manually.

To install the bearing, simply slide the bearing ontl the end of the dummy end shaft.

Details on the SeceuroDrive Motor Limit Setting Instructions can be watched here.

Industry Leading Warranty Terms

All SeceuroGlide insulated roller garage doors purchased as a supply only offering include a comprehensive manufacturer warranty provided by SWS UK. Standing out as some of the best genuine warranty terms for an electric roller garage door in the UK, this coverage ensures long term peace of mind for your investment. Because the doors are supplied without professional fitting, this is strictly a parts only warranty that covers replacement components but excludes any on site labour costs.

Warranty Coverage By Model

The SeceuroGlide range offers exceptional warranty lengths depending on the specific model and its operating mechanism. Coverage protects against defects in material and workmanship, subject to correct installation, standard operation, and regular maintenance by a trained engineer.

Extended Automation Coverage

To further demonstrate product reliability, an extended 7 year automation warranty applies to the SeceuroDrive motor and SeceuroSense Plus control unit. To activate this industry leading benefit, the customer must register the product online within three months of installation. Please note that the entry level SeceuroGlide LT model carries a standard 5 year automation warranty and is excluded from this extension, and any door supplied with an alternative Somfy motor is capped at a 5 year warranty.

Premium Finish Guarantee

Standard plain colours and painted woodgrain finishes are protected under the baseline 5 year general product warranty. For maximum durability, doors ordered with premium Renolit wood effect finishes, specifically Rosewood, Mahogany, Golden Oak, White, and Black Brown, receive a limited 10 year guarantee covering the slat finish.

Important Exclusions

As a supply only arrangement, specific environmental limitations and product restrictions apply to the warranty coverage. Notably, the highly secure SeceuroGlide Excel model cannot be fulfilled as a supply only order; it must be professionally fitted by a trained installer to retain its certification and warranty.

• Weather and Sunlight: The warranty does not guarantee against water ingress in exposed locations during extreme weather, and thermal expansion on dark coloured doors facing direct sunlight is not considered a manufacturing defect.
• Cosmetic Marking: Standard operational friction may cause unavoidable cosmetic marking on the internal side of the curtain over time, which is explicitly excluded from coverage.
• Coastal Environments: Doors installed in coastal areas face a higher risk of deterioration and require strict adherence to the manufacturer cleaning instructions to maintain valid coverage.

Measuring Guide for SeceuroGlide Insulated Roller Garage Doors

Accurate measuring is essential when ordering a SeceuroGlide insulated roller garage door. Every door in the range is precision manufactured to exact ordering dimensions and made to the millimetre without any tolerance included by the factory. Taking the time to measure correctly will ensure a smooth installation and a perfect fit for your garage opening.

The Most Common Installation Method Internal Face Fit

The first and most important thing to know is that most electric roller garage doors are installed as an internal face fit. By fitting the guide rails to the inside face of your garage wall, you maximise the drive through width and height of your garage aperture. This method also ensures the curtain roll and endplates are neatly tucked away and hidden inside the garage, protecting them from the elements and providing a clean, seamless finish from the outside.

Understanding the Ordering Dimensions

As shown in the image on this page, the two key ordering dimensions for any SeceuroGlide roller garage door are the Over Guide Width and the Guide Height. The Over Guide Width is the total external width of the door including both side guide rails. The Guide Height is the vertical measurement of the visible door opening when the door is fully closed. It is important to note that the endplates and curtain roll sit above the Guide Height, so you must ensure there is sufficient headroom above your stated Guide Height to accommodate these components.

How to Measure Your Garage Opening

• Width: Measure the structural opening width of your garage at a minimum of three points the top, middle and bottom. Record the narrowest measurement.
• Height: Measure the height of your garage opening on both sides and in the centre. Record the shortest measurement.
• Headroom: Measure the available space above the top of your opening inside the garage. The SeceuroGlide Original and Excel models require a minimum of 300 mm headroom for doors up to 2500 mm in opening height and 350 mm for doors up to 3500 mm in opening height. The SeceuroGlide Compact requires just 205 mm of headroom. This space is needed for the endplates, curtain roll and any optional hood or fascia.
• Depth: Check there is sufficient depth inside the garage to allow the guides and any fixings to be secured without obstruction. Ensure no pipework, lighting, cabling or shelving will interfere with the guide rails or curtain travel.

Fitting Between an Opening

When installing a SeceuroGlide roller door between a structural opening, you must always allow for your own fitting tolerances. The factory manufactures each door to the exact dimensions you order, with no additional tolerance built in. If you order a door at the precise measurement of your opening, it may not fit. We strongly recommend deducting a suitable allowance from both the width and height measurements to ensure the door can be installed comfortably with room for packing and levelling during installation.

Fitting in Front of the Opening Externally

If you are considering fitting the door to the external face of your garage wall in front of the opening, there will be several other important considerations. External installations require specific components, such as a full box cover to protect the roll, as well as upgraded weatherproofing measures. Additionally, the standard bottom slat transmitter must always be installed internally and cannot be exposed to excessive moisture, meaning a higher IP rated transmitter will be required. Because of these extra requirements and safety considerations, it is best to email or call us directly to discuss your project before placing an order for an external face fit.

Important Tips Before You Order

• Always use a steel tape measure for accuracy and measure in millimetres.
• Check that the wall surfaces and lintel above the opening are flat, plumb and structurally sound enough to support the door and its fixings.
• Ensure any floor surface where the door will close is level. If the floor is uneven, consider the optional SeceuroSeal for improved weather protection at the base of the door.
• If you are unsure about any aspect of measuring, please contact us before ordering. Our team is happy to advise and help ensure you get the correct dimensions for your new door.

Please Note: Important Information when installing the Seceuroglide LT Roller Doors.

In the absence of the spring we apply an LT dummy end. This has an adjustable shaft in it. This is designed to be moved so the axle becomes the right size. This is stiff to pull but once its moved it moves freely. This then slots in to the bracket as normal.