What are the ordering sizes for gliderol steel roller doors



The answer to your selected question is shown below.

A:

Gliderol single skin steel roller doors are fitted behind the opening, on the inside face of the wall. The guides and roller support brackets fix to the wall either side of the opening, and the curtain roll sits above the lintel.

Ordering width

The ordering width is your opening width plus the width of the two guides. It doesn't include the fixing lugs or support brackets.

  • Doors up to 3450mm wide: opening width + 50mm (two 25mm guides)
  • Doors over 3450mm wide: opening width + 100mm (two 50mm guides)
  • Windlock security option: opening width + 140mm on all door widths

Example: Your brick opening is 2300mm wide. Order a 2350mm wide door.

Measure the opening width at the top, middle and bottom, and use the widest measurement. If you have extra wall space either side, you can order up to 100mm wider so the guides are completely hidden from the outside.

Ordering height

The ordering height is the guide height, which is ideally the height from the floor to the underside of the lintel. The curtain roll sits above the guides, and its size depends on the height of the door.

If you're unsure, order a little taller. The guides can be cut down on site if needed.

Allow extra space for fitting

The fixing lugs, support brackets and curtain roll all need more space than the ordering size, so the installed door is always wider and taller than the size you order. Check you have enough side room on both sides of the opening, and enough headroom above the lintel, before you order.

Not sure about your sizes? Read our Gliderol measuring guide, or send us your measurements or call us on 01926 463888 and we'll check them for you.

Gliderol roller door key measurements

Back to Faqs

We use cookies to provide you with a better website experience. Close this popup to carry on browsing, or click here to find out more about cookies