What are the ordering sizes for hormann rollmatic roller doors



The answer to your selected question is shown below.

A:

Hormann roller doors are ordered differently from most other roller garage doors in the UK. Most brands are ordered by the overall width, including the side guides. Hormann Rollmatic doors are ordered by the clear width between the guides, and the guide height, which doesn't include the hood/endplates size.

Hormann ordering sizes

  • Ordering width: the clear width between the two side guides. The guides sit outside this measurement
  • Ordering height: the guide height, from the floor to the top of the guides. The hood sits above this

Rollmatic T sizes

  • Side guides: 75mm each side on doors up to 3000mm wide, or 105mm each side on wider doors
  • Full hood: 290mm, supplied as standard
  • Door sizes: from 1000mm to 5000mm wide, and from 1200mm to 3100mm high

Fitting behind the opening (recommended)

Your brickwork opening width becomes the ordering width, and your floor to lintel height becomes the ordering height. You'll need room behind the piers for the guides, and at least 290mm of clear headroom above the lintel for the hood.

Example: a 2280mm wide x 2150mm high opening gives an ordering size of 2280 x 2150mm. The overall width with the guides will be 2430mm, and the overall height with the hood will be 2440mm.

Fitting between the opening

Take the guides and hood off your smallest opening measurements, and allow a fitting tolerance:

  • Width: deduct 150mm (doors up to 3000mm wide) or 210mm (wider doors), plus your tolerance
  • Height: deduct the 290mm hood, plus your tolerance

Allow at least 10mm to 15mm tolerance overall, and more if the brickwork is uneven.

Rollmatic 2

The Rollmatic 2 is sized in the same way. It has wider 110mm guides on every size of door, and a hood of 290mm on doors up to 2300mm high, or 335mm on taller doors. On this model the spring balance and external motor sit to one side.

All Hormann Rollmatic doors are made to measure at no extra cost. Check the measuring tab on the product page before ordering, or call us on 01926 463888.

Back to Faqs

We use cookies to provide you with a better website experience. Close this popup to carry on browsing, or click here to find out more about cookies