The answer to your selected question is shown below.
A:
All sectional garage doors are ordered by their internal fixing sub frame dimensions (daylight opening)—the clear width and height between the steel fixing frame legs and top header supplied with most doors.
- Fitting behind the opening (recommended): Your ordering size normally matches your structural brickwork opening. For example, a 2286mm x 2125mm (7'6" x 7'0") door fits directly behind a 2286mm x 2125mm opening. Because the panels rise vertically inside and never pass through the aperture, you can also install a larger standard size door behind a smaller opening if there is enough internal space for the frame. Allow 90mm to 100mm of clear internal sideroom on each side.
- Fitting between the opening: The steel frame sits inside the brickwork, so you must factor the frame legs (85mm to 90mm wide) and fitting tolerances into your overall opening width. Allow roughly 95mm to 100mm per side (190mm to 200mm in total), unless the opening is completely square and plumb.
- Headroom: Internal headroom is the main variable across brands and spring systems. Allow 100mm to 140mm for standard tension spring systems and 210mm to 250mm for wider front torsion spring doors. Low headroom gear is available if vertical space is limited.
As frame profiles and spring clearances vary by manufacturer, please check our latest sectional door sizing guides or call and email us directly for help confirming your measurements and tracking gear.









