The answer to your selected question is shown below.
It depends on the brand. Each manufacturer measures its ordering size differently, and in most cases it isn't the size of your garage opening. Here's what the ordering size means for each range we offer.
- GDO steel: The overall width and height of the door and its factory fitted steel sub frame, in millimetres. You're ordering the outside size of the complete unit that arrives.
- Hormann: An imperial reference, such as 7'0" x 6'6", which refers to the inside of the steel sub frame. The overall frame is larger, and on 6'6" and 7'0" heights there's also a head section on top.
- Garador: A size code, such as 7066 for 7'0" x 6'6". Each code has an internal frame size for an on site timber frame, and separate overall frame sizes for pre framed canopy and retractable doors.
- Cedar timber: Made to measure as standard, ordered to the clear opening inside your timber sub frame in millimetres. The timber sub frame should be at least 70mm x 70mm, and larger on double doors.
- Penchard bespoke timber: Made to measure only. Send us your opening sizes and we'll work out the ordering sizes and send you a drawing before anything is made.
Fitting between the brickwork? None of the ordering sizes include a fitting tolerance. If the door is fitting inside the opening, take a minimum of 10mm off the width and 5mm off the height when working out your overall frame size. If it's fitting behind the opening, the frame needs to cover the brick piers and lintel.
For a full explanation of each brand, with size tables, see our guide to standard size or purpose made garage doors. If you're not sure, send us your measurements and we'll check them for you.









