Garador Ascot Standard (19 Colour Options) Up and Over garage door Steel Garador

Garador Ascot Steel Garage Door in 19 Colours

Architectural Minimalist Styling with a Custom Colour Finish

The Garador Ascot offers an uncluttered, modern appearance that stands out from typical narrow ribbed garage doors. Instead of closely spaced corrugations across the whole face, the Ascot features broad vertical panel pressings separated by crisp swage lines. This produces wider, flatter steel surfaces that give the door leaf a cleaner and more substantial look from the kerb.

Choosing the Ascot in a factory colour completely transforms how the design complements your home. In contemporary greys and blacks such as Anthracite Grey, Slate Grey or Jet Black, the wide pressings look sharp and architectural alongside modern composite doors and grey window profiles. In heritage tones like Chartwell Green, Moss Green, Terra Brown or Light Ivory, the door softens against stone, cream render and red brickwork.

Every panel is manufactured from high grade galvanised steel built inside a rigid steel box chassis for long term rigidity. The exterior is finished in a tough, factory applied polyester powder coat that requires no initial decorating on site, saving time and keeping future maintenance to a simple wash down.

* Unlike standard white doors which are supplied unwrapped, all 18 optional coloured doors are factory shrink wrapped for transit protection and include a colour matched touch up paint stick as standard for minor site marks.

Choice of 19 Factory Powder Coated Colours

You can select from 19 durable factory powder coated finishes when ordering:

• Traffic White (RAL 9016)
• Jet Black (RAL 9005)
• Terra Brown (RAL 8028)
• Window Grey (RAL 7040)
• Agate Grey (RAL 7038)
• Light Grey (RAL 7035)
• Stone Grey (RAL 7030)
• Anthracite Grey (RAL 7016)
• Slate Grey (RAL 7015)
• Fir Green (RAL 6009)
• Moss Green (RAL 6005)
• Pigeon Blue (RAL 5014)
• Steel Blue (RAL 5011)
• Signal Blue (RAL 5005)
• Ruby Red (RAL 3003)
• Light Ivory (RAL 1015)
• Chartwell Green (Garador reference BS 4800)
• Golden Brown
• Burgundy Brown

* Colours shown on screen are an electronic representation. When matching existing front doors or window frames, check against a physical RAL or colour chart before placing your order.

Standard Ordering Sizes and Gear Types

The Ascot single door is available in 10 standard ordering sizes across two standard heights: 6ft 6in (1981mm) and 7ft 0in (2136mm).

Available ordering widths across both heights:

• 7ft 0in wide (2134mm)
• 7ft 1in wide (2170mm)
• 7ft 5in wide (2259mm)
• 7ft 6in wide (2284mm)
• 8ft 0in wide (2439mm)

Every size can be specified with either canopy or retractable operating gear. Note that these dimensions refer to the internal ordering reference sizes, so please consult the Measure tab to check how they relate to your overall steel fixing frame or timber opening before ordering.

Canopy or Retractable Operating Gear

Canopy gear uses vertical jamb tracks and an overhead zinc coated torsion spring with cast alloy drums to counterbalance the door leaf. When fully open, roughly one third of the door projects outward to form an overhead canopy. Because there are no tracks extending back into the garage, canopy gear is the ideal choice for manual doors where ceiling space must remain clear for overhead storage.

Retractable gear pulls the door leaf completely inside the garage along two horizontal overhead tracks supported from the ceiling or high side walls. Counterbalanced by smooth side spring cassettes, retractable gear is the recommended mechanism if you intend to fit a remote control electric operator.

* Both canopy and retractable doors swing outward at the base as they begin to open, so remember to allow clearance on your driveway in front of the door.

If your garage aperture is narrow, you can also specify optional Retractable Plus gear. This incorporates specially curved lifting arms and lower spring brackets to keep the clear drive through width open at vehicle wing mirror height.

Factory Steel Frame, Handles and Security Upgrades

We always recommend ordering your door with a factory pre fitted steel fixing frame. A steel frame provides tight, factory set operating clearances, speeds up installation and eliminates the regular maintenance, warping and rotting of timber. When ordered with a coloured door, the exterior face of the steel frame is powder coated in the matching door colour.

If you are fitting into a sound, plumb and square existing timber sub frame, the door can also be supplied unframed to fit into your existing opening.

All manual doors come fitted as standard with a black nylon handle set and two point mechanical slam latching operated by a euro profile cylinder. If you want to match exterior door hardware, you can upgrade to an optional diecast metal handle in white, brass effect or chrome effect. For enhanced physical security, an optional four point locking kit can be added to manual doors, providing two extra locking latches at the top corners of the door leaf.

Electric Remote Control Operation

Automating a retractable Ascot door is very straightforward using a Garamatic electric operator. The operator boom mounts directly down the centre of the garage ceiling and lifts the door open smoothly at the touch of a hand transmitter, featuring soft start and soft stop ramping, automatic obstacle reversal and built in motor locking.

If your garage has no other entrance or pedestrian side door, an emergency external release kit must be fitted so you can manually disengage the motor carriage from outside during a power cut.

An optional de-latch security locking kit is also available for electric retractable doors, allowing the mechanical bottom catches to engage and release automatically alongside the electric motor drive.

To start, choose your door ordering width and height along with your chosen canopy or retractable lifting mechanism from the drop-down menu options. These figures refer to the internal ordering reference sizes, so remember to allow for your fixing sub frame when measuring between your brickwork opening.

1. Choose a Factory Fitted Steel Fixing Frame

We always recommend ordering your door with a factory pre-fitted steel fixing frame. Choosing a steel frame ensures the door leaf arrives already hung and aligned with tight, factory-set tolerances all the way round, saving significant installation time on site. When ordered with a coloured door, the exterior face of the steel frame is powder-coated in the matching door colour, completely eliminating the rot, twisting and maintenance of a traditional timber sub frame.

The profile width of the steel sub frame depends on the operating gear selected:

• Canopy gear steel frame: Uses a 55mm wide by 40mm deep box section profile on both uprights.
• Retractable gear steel frame: Uses a 75mm wide by 40mm deep box section profile on both uprights to accommodate the retractable pivot arms.

* If you are fitting to an existing timber frame that is completely sound, plumb and square, the door can also be supplied unframed to fit directly into your existing wooden sub frame.

2. Choose a Handle Option

All doors are supplied with a practical black nylon handle set as standard. If you want to complement your property's exterior fittings or front door ironmongery, you can upgrade to a high quality diecast metal handle finished in white, brass effect or chrome effect.

3. Choose Extra Security Locking (Manual Doors Only)

Standard manual doors feature reliable two-point bottom locking catches operated by the exterior handle and key cylinder. For increased physical security against forced entry, you can upgrade to a factory fitted 4-point locking rod system.

This upgrade adds two additional steel locking rods and spring-loaded slam latches into the top corners of the door leaf. When paired with a factory steel fixing frame, the frame's steel slam strips and protective internal corner plates shield the latch points from external lever attack.

4. Choose a Remote Control Electric Operator

For effortless push button opening, add a Garamatic electric operator to a retractable door. Supplied with two remote hand transmitters, it features smooth soft start and soft stop ramping, automatic obstacle safety reversal, an internal manual emergency release cord and integrated LED courtesy lighting with low standby power consumption.

The package includes a short K boom suitable for standard door heights up to 2500mm.

Emergency External Release (Electric Doors)

An emergency external manual release kit is essential if your garage has no other pedestrian side door or secondary entrance. It connects a mechanical release cable from the operator towing carriage to the door handle or a dedicated key barrel, allowing you to disengage the motor drive from outside and open the door manually in the event of a power cut.

Optional De-Latch Security Locking Kit

When an electric operator is fitted to a retractable door, the standard manual locking latches are disconnected and the motor boom holds the door closed at the top. The optional de-latch kit reconnects the bottom mechanical latches directly to the operator carriage via a release cable. The latches automatically release when opening and engage back into the frame on closing, giving you three point locking security.

* De-latch kits are suitable for retractable doors only and cannot be used with canopy gear. Please call or email our technical sales team to check operator compatibility, get a price and add this option to your order.

Construction & Finish

The Garador Ascot is manufactured from high grade galvanised steel featuring broad vertical panel pressings built into a rigid steel box section chassis. The outer face is completely rivet free and is protected with a tough, factory applied polyester powder coat paint finish that requires no initial decorating on site.

Choose from 19 factory powder-coated colour options:

• Traffic White (RAL 9016)
• Jet Black (RAL 9005)
• Terra Brown (RAL 8028)
• Window Grey (RAL 7040)
• Agate Grey (RAL 7038)
• Light Grey (RAL 7035)
• Stone Grey (RAL 7030)
• Anthracite Grey (RAL 7016)
• Slate Grey (RAL 7015)
• Fir Green (RAL 6009)
• Moss Green (RAL 6005)
• Pigeon Blue (RAL 5014)
• Steel Blue (RAL 5011)
• Signal Blue (RAL 5005)
• Ruby Red (RAL 3003)
• Light Ivory (RAL 1015)
• Chartwell Green (Garador reference BS 4800)
• Golden Brown
• Burgundy Brown

All 18 optional coloured doors are factory shrink-wrapped for transit protection and include a colour-matched touch-up paint stick as standard for minor site marks. Standard Traffic White (RAL 9016) doors are supplied unwrapped as standard.

Available Standard Sizes

The Ascot single door is available in 10 standard ordering sizes across two standard heights, offered with either canopy or retractable gear:

• Height 1981mm (6ft 6in): Available in widths 2134mm (7066), 2170mm (7166), 2259mm (7566), 2284mm (7666) and 2439mm (8066).
• Height 2136mm (7ft 0in): Available in widths 2134mm (7070), 2170mm (7170), 2259mm (7570), 2284mm (7670) and 2439mm (8070).

* These dimensions refer to the internal ordering reference sizes. Please consult the Measure tab for overall steel frame dimensions.

Canopy Gear (Single Doors Only)

Canopy gear uses vertical jamb tracks and an overhead zinc-coated torsion spring with cast alloy cable drums to counterbalance the door leaf. Because all mechanical components are housed within the frame, no horizontal tracks run back into the garage, leaving the ceiling completely clear for storage.

When fully open, approximately one third of the door leaf projects outside the garage opening, forming an overhead canopy.

Single canopy doors include:

• Anti-drop safety device to prevent the door falling in the event of spring or cable failure
• Zinc-coated torsion spring for long term corrosion resistance
• Cast alloy cable drums and high tensile steel cables
• Two-point mechanical slam-latch locking
• Black exterior handle and internal latch release

Nominal drive-through clearance reductions:

• Width: opening width minus 40mm
• Height: opening height minus 130mm

Retractable Gear

Retractable gear pulls the door leaf fully inside the garage along horizontal overhead tracks supported by ceiling or high wall brackets. Counterbalancing is handled by multiple-spring cassettes mounted on each side arm. Retractable gear is the recommended mechanism if you plan to automate the door with an electric operator.

Single retractable doors include:

• Multiple-spring cassettes with protective pivot-arm covers to prevent finger trapping
• Secure open parking position to prevent accidental closing
• Two-point mechanical bottom locking
• Black exterior handle

Nominal drive-through clearance reductions:

• Width: opening width minus 105mm
• Height: opening height minus 110mm

* These figures are nominal gear deductions, not structural opening tolerances. Always allow for your fixing sub frame separately.

Optional Retractable Plus Gear

Retractable Plus gear features specially curved lifting arms and lower spring brackets that provide additional drive-through width at vehicle wing-mirror height. It is ideal on narrower driveways and single garage openings where clearance between your vehicle and the door lifting arms is critical.

Available on all Ascot single retractable sizes across 1981mm and 2136mm heights.

Steel Fixing Frame Specifications

When ordered with a factory pre-fitted steel box section frame, the exterior face of the frame is finished in the matching door colour. Profile dimensions are:

• Canopy steel frame: 55mm wide uprights × 40mm deep box section.
• Retractable steel frame: 75mm wide uprights × 40mm deep box section.

Mechanical Locking Upgrades

All manual doors come standard with two-point mechanical locking operated via the exterior handle and euro profile key cylinder.

• Optional 4-point locking upgrade: Available for manual doors at an extra charge. Adds steel locking rods and corner latches to the top corners of the door panel, providing four-corner physical latching against forced entry.

Optional De-Latch Security Locking Kit

When an electric operator is fitted to a retractable door, the manual locking catches are normally disconnected and the motor carriage holds the door closed at the top. An optional de-latch kit links the bottom mechanical catches directly to the operator carriage via a release cable, automatically releasing them on opening and locking them into the frame on closing for combined motor and physical latch security.

* De-latch kits are suitable for retractable doors only and cannot be fitted to canopy gear. Please email or phone our technical sales team to confirm compatibility with your operator and add this kit to your order.

Installation Guide: Garador Up and Over Garage Doors

Installing a Garador up and over garage door is a straightforward job for a competent tradesperson or experienced DIYer, especially when supplied with a factory steel fixing frame. How the door installs depends on whether you have selected canopy or retractable gear, whether you are fitting a single or double-width door, and whether you are fitting into a new steel sub frame or an existing timber frame.

Factory Steel Sub Frame vs Existing Timber Frame

With a factory steel frame: Single canopy and single retractable doors ordered with a steel frame arrive factory pre-hung as a complete unit. The frame is pre-matched to the door panel with consistent tolerances all round, eliminating the risk of timber rot, warping, or seasonal movement. Installation simply involves offering the complete pre-assembled unit into the opening, squaring it up, and fixing it through the pre-drilled points.

With an existing timber sub frame: If you are hanging a door into an existing timber frame, make sure the timber is completely sound, square, and structurally rigid. The internal width and height between the timber frame legs and head must match the door's nominal ordering size exactly. Any twist or out-of-square in a timber frame will cause the door leaf to bind, rub, or fail to latch properly.

* Note on double doors: Double retractable garage doors (over 10ft wide) are supplied with the steel sub frame in kit form rather than pre-hung. The steel frame is assembled and fixed into the opening first, and the door panel and horizontal track gear are installed into it on site.

Canopy Gear: What to Expect

Canopy doors are ideal when you want to keep the garage ceiling completely clear. The entire operating mechanism — vertical jamb tracks, overhead zinc-coated torsion spring, and cast alloy cable drums — is contained entirely within the door frame.

• No rear tracks: There are no horizontal tracks extending into the garage, so you do not need to fix anything to the garage ceiling or rafters.
• Headroom: Ensure you have sufficient headroom above the frame head for the overhead torsion spring assembly (minimum 55mm to 65mm depending on whether fitting between or behind the aperture).
• Level floor essential: The door frame uprights must sit on a firm, level base. If the floor slopes, the door leaf will not close down evenly across the bottom.

Retractable Gear: What to Expect

Retractable gear pulls the door leaf fully inside the garage on horizontal overhead tracks, counterbalanced by multiple side-spring cassettes on each side. It is the natural choice if you intend to fit an electric operator.

• Internal depth & ceiling fixings: The horizontal tracks run back into the garage slightly further than the full door height. You must have clear, unobstructed space along the ceiling or high side walls to mount the rear track suspension brackets.
• Squaring the tracks: When fixing the horizontal overhead tracks, measure across the diagonals between the tracks and the front frame. Both tracks must be dead level and completely square to the front frame; if the tracks are splayed or out of square, the roller wheels will bind and the door will stick when opening.

Core Installation Steps (Single Pre-Framed Door)

1. Check the opening: Measure the structural brickwork opening across the top, middle, and bottom, and vertically on both sides. Check that the opening is square by checking diagonal measurements, and confirm that the floor is level across the threshold.
2. Position the frame: Offer the pre-assembled door and frame into the opening. Support it safely with props or wedges so that the frame head is level and the side jambs are completely plumb.
3. Check frame diagonals: Measure diagonally from the top corner to the opposite bottom corner in both directions. The two diagonal measurements must be identical before fixing.
4. Fix the frame: Secure the frame into the surrounding masonry through the prepared fixing points or anchor brackets using heavy-duty frame fixings. Do not over-tighten fixings initially; tighten progressively while checking that the frame jambs remain straight and do not bow.
5. Hang horizontal tracks (Retractable only): Lift and support the overhead horizontal tracks, secure them to the top corners of the front frame, and fix the rear suspension brackets into sound ceiling joists or side walls, ensuring the tracks are level and square.
6. Release transit packing: Once the frame is securely fastened, carefully remove transit brackets, safety transit screws, and any protective packaging securing the springs or cables, following the manufacturer's sequence.
7. Test manual operation: Operate the door by hand. It should move smoothly without dragging, binding, or shuddering, and sit balanced when released halfway. Check that the mechanical latches align and engage cleanly into the frame keeps.

Installing an Electric Operator

Automating an up and over door adds convenience and security, but the operator must be installed correctly to work safely with the door's balance mechanism.

• Door condition comes first: An electric operator will not fix a badly fitted, sticking, or unbalanced garage door. The door must open and close smoothly and balance properly by hand before an operator is installed.
• Automating retractable doors: Retractable doors are designed for straightforward automation. A standard ceiling-mounted boom operator (such as a Garador GaraMatic) is installed down the centre of the garage ceiling. The towing arm connects directly from the operator carriage to the top of the door leaf. Standard bottom mechanical locking catches are typically bypassed, as the motor carriage positively locks the door closed at the top. Alternatively, an optional de-latch kit can be fitted to retain the bottom mechanical catches.
• Automating canopy doors: Because a canopy door pivots outward at the top and runs in vertical tracks, it cannot be pulled straight back by a standard operator boom. You must fit a canopy bow-arm converter (or a dedicated canopy lifting device) to the back of the door panel. The bow arm transfers the horizontal pull of the operator boom into the vertical and swinging motion needed to lift the canopy door. Note that a traditional bow-arm converter reduces the drive-through clearance height in the centre by roughly 100mm to 130mm when open.
• Fit an emergency external release if required: If your garage has no other pedestrian side door or entrance, you must install an emergency external manual release kit. In the event of a power cut or motor failure, this allows you to disconnect the electric drive carriage from outside using a key and open the door manually.
• Safety limits and force testing: After installing the motor, set the open and close travel limits carefully so the door closes snugly without forcing the panel down onto the floor. Always test the automatic safety reverse function by placing a solid obstacle on the floor to verify that the door reverses immediately on contact.

Garador Steel Up & Over Garage Doors – Manufacturer Warranty Details

When you purchase a Garador steel Up & Over garage door through Garage Doors Online, your door is backed by Garador’s official manufacturer warranty, ensuring long term reliability and peace of mind.

Summary of Warranty Periods

• 10 Year Limited Warranty: Covers the safe and reliable operation of the complete steel door leaf, the factory steel sub fixing frame (where supplied), and the primary mechanical chassis structure against manufacturing or material failure.
• 5 Year Guarantee on Operating Components: Covers the counterbalance springs, wire cables, track rollers, hinges, and guide rollers under normal domestic use (defined as up to 5 door open and close operations per day).
• 5 Year Operator Warranty (GaraMatic Motors): If supplied with an electric GaraMatic operator, the mechanical motor drive, boom rail, and internal electronic control board are covered for 5 years.
• 2 Year Radio & Accessory Warranty: Covers remote control hand transmitters, radio receivers, external wall consoles, keypads, and safety accessories.
• 6 Month Replacement Parts Cover: Genuine replacement parts fitted under warranty carry a 6 month guarantee or the remainder of the original warranty term, whichever is longer.

Warranty Conditions

For your warranty to remain fully valid:

• The door and any automated equipment must be installed, aligned, and adjusted in strict accordance with Garador’s official installation and user instructions.
• The product must be used purely for domestic purposes and operated within its specified design limits.
• All mechanical pivots, bearings, rollers, and latches must be inspected periodically and kept clean and lightly lubricated.
• Painted polyester finishes should be washed down periodically with warm water and a non abrasive sponge to remove atmospheric road dirt and salt deposits.
• Any accidental chips or surface scratches must be touched up promptly using suitable touch up paint to prevent oxidisation or corrosion spreading.
• Repairs or adjustments must be carried out using only genuine Garador replacement parts.

*Warranty cover applies to the original purchaser at the registered delivery and installation address and is non transferable.

Standard Exclusions

The manufacturer warranty does not cover:

• Normal wear and tear beyond specified guarantee cycles.
• Consumable items such as handset batteries, fuses, and internal light bulbs.
• Cosmetic transit or site damage (such as scratches, scuffs, or dents) occurring after delivery or during third party installation.
• Damage caused by external chemical influences, fire, flood, standing water, road salt, or abnormal environmental conditions.
• Installations in aggressive coastal or high humidity marine environments (within 3 miles of the sea) unless an appropriate specialist coastal specification was approved prior to purchase.
• Dismantling, re-installation, or courier carriage costs incurred during a claim.

Making a Warranty Claim

In the unlikely event of a defect, please have the following information ready:

• Your original Garage Doors Online order number or invoice.
• The product serial number (located on the silver data plate on the rear edge of the door leaf).
• A clear description and photographs showing the door issue and overall opening.

Please send these details to Garage Doors Online customer support, and we will liaise directly with Garador technical services on your behalf.

Garador Ascot Single Door Ordering Sizes and Frame Dimensions

All dimensions below are width × height in millimetres. Use the internal frame sizes if you are fitting into a timber sub frame, or the overall steel-frame sizes if ordering with a factory pre-fitted steel frame for either canopy or retractable gear.

On a mobile, swipe across the table to view all columns.

*Fitting tolerance: No fitting clearance is included in the overall frame dimensions. If fitting between the brickwork aperture, your structural opening must be at least 10mm wider and 5mm higher than the overall steel frame size to allow for squareness and fitting tolerance.

Canopy Gear



Retractable Gear