Garador Ascot (19 Colour Options) Side hinged garage door Steel Garador

Please Note: The doors are shown as 50/50 door split.

Up to 2234mm overall frame width these doors are also available as a 1/3-2/3 door configuration.

Domestic garage doors

Standard powdercoat factory finish is white inside and out. A steel sub fixing frame is factory fitted as standard and finished to the same colour as the door panels.

The order sizes refer to the nearest imperial inside dimensions of the steel sub frame and you simply add 150mm to the width and 75mm to the height for the overall frame dimensions. i.e. 8' x 7' door size is 2419 plus 150mm and 2136 plus 75mm to give overall frame dimensions of 2569 x 2211.

Pre-Framed Design and Concealed Hinges
All doors come pre-framed with 75mm wide door frame and right-hand door leaf leading as standard. Hinges are concealed in the frame, with no hinge knuckles raised above the door's surface.

Two-Point Locking
A shoot bolt latch is used to secure the fixed door leaf at the top and bottom of the door.

Door Stays and Gas Pistons
Side Hinged doors come complete with solid metal door stays and pull cord release. Gas pistons are fitted to each door leaf for a controlled closing motion.

Rubber weather seals
Sturdy rubber weather seals are built into the door frame, along the door stop and leading door leaf.

Aluminium Threshold
As standard a 20mm aluminium threshold for the base of the door is supplied.

Handle Options
Black lever handle supplied as standard on the right side (viewed outside) and centrally located flip-up handle which releases shoot-bolt latches at the top and bottom of the fixed leaf (viewed inside).

The following powdercoat colour finishes are available:

White RAL 9016 as standard

Terra Brown RAL 8028

Blue RAL 5005

Steel Blue RAL 5011

Moss Green RAL 6005

Red RAL 3003

Black RAL 9005

Anthracite Grey RAL 7016

Clay Brown RAL 8003

Fir Green RAL 6009

Light Grey RAL 7035

Light Ivory RAL 1015

Pigeon Blue RAL 5014

Stone Grey RAL 7030

Window Grey RAL 7040

Golden Brown

Chartwell Green

Burgundy Brown

BS 13241 Compliant - All Garador garage doors comply with the latest European safety standards.

The benefits of a Garador Beaumont side hinged door:

> Both doors open outwards providing unrestricted space within the garage

> Constructed from high grade galvanised steel

> Weather strips around 3 sides of the door to help prevent draughts

> Shoot bolt latch at top and bottom of door for security

> Centre style helps prevent forced entry to locking system

Installation Instructions are provided with every door.

GARADOR GARAGE DOOR WARRANTY

Warranty Period 

The purchaser is granted a warranty covering the safe and reliable function of the Garador garage door for a period of 10 years* from the date of purchase The warranty period for replacement parts is 6 months or to the end of the current warranty period, which ever is longer. The door mechanism and steel frame (if applicable) is covered by the 10 year* warranty period.   

Requirements

Warranty claims are only applicable in the country where the garage door was purchased. The warranty only covers damage to the contract object. The fully completed warranty card together with the receipt of purchase correspondingly dated substantiates your right to claim under the warranty. 

Performance

During the warranty period we undertake to rectify any and all defects to the Garador product which can be proved to be attributed to a material or manufacturing fault. We pledge at our discretion either to exchange the defective merchandise for faultless merchandise, repair it or allow a reduction in price. We do not accept costs for dismantling and installation nor for carriage. Replaced parts become property of Garador Ltd.

The warranty does not cover damage caused through: -

normal wear and tear

improper installation

negligent care and maintenance

improper initial and subsequent operation

negligent or wanton destruction

external influences such as fire, water, salts, alkaline solutions, acids,

abnormal environmental Influences

mechanical damage through Improper transport and fitting

priming and other surface protection treatments

incorrect or too late applied surface protection treatments

repair by non-qualified persons

using non-Garador parts without the approval of the manufacturer

removal of the product number or making it unidentifiable