The answer to your selected question is shown below.
Yes. A timber subframe is often the best option when there's no brick face behind the opening to fix the door to.
Sectional and roller doors are designed to fix directly to the brickwork, usually on the inside face of the opening. Fitted there, the door sits behind the piers and the lintel, which gives you the most width and height to drive through. But many garages don't have a brick pier on one or both sides, so there's nothing to fix to.
Sectional doors
Most sectional door manufacturers offer brackets or cover profiles for this, but they can be expensive and fiddly to fit and finish neatly. A timber subframe is often a simpler alternative. It creates a solid face to fix the door frame to, and it has other benefits:
- On an insulated sectional door, it adds insulation around the sides and head, where the standard frame is single skin steel
- It's easy to finish neatly, and it can look smart from the outside
- You can fit the door behind the opening even where the brickwork doesn't allow it
Roller doors
The challenge with a roller door is usually headroom, as the box needs room above the opening. If there's not enough side room or headroom to fit between the opening, a timber post and beam frame can be built so the door fits behind. The gaps around the frame are then filled in to close off and seal the installation.
* The timber must be sound, properly sized and securely fixed to the structure, and the door must still be fitted to the manufacturer's instructions. If you're not sure, send us some photos and sizes of your opening and we'll advise.
Call 01926 463888 or email enquiries@garagedoorsonline.co.uk.









