Our full list of Questions and Answers is shown below, click on the more link to see the detailed answers to some of the questions.
The easiest up and over garage door to install is a single width canopy door ordered with a factory fitted steel box section subframe, such as those in our popular GDO range, alongside options from Hormann and Garador.
All of our single width up and over garage doors up to 9 feet wide in steel, timber and GRP are supplied ready assembled with their operating mechanism already fitted. Choosing a GDO framed canopy door, or an equivalent framed model, means the door panel, gear and steel box section subframe arrive from the factory as one complete unit ready to offer straight into your garage opening. Although moving the unit requires a two person lift into place, fixing the steel subframe either inbetween or behind the structural opening is straightforward using the supplied steel brackets.
Canopy gear keeps fitting time to a minimum because there are no horizontal tracks extending into the garage to assemble or align. Once the frame is secured square and level, you simply release the factory set spring tension system by removing the transit fixings, attach the external handle with its single bolt, and make any minor adjustments to the locking rods.
Ordering your GDO up and over door with its matching paint finished steel subframe eliminates the cost and hassle of building and painting a traditional timber frame on site. Because the door and frame are engineered together in the factory, the gap tolerances are much tighter, delivering better security and superior weather sealing straight away.
Yes. Almost all of the side hinged doors we sell can be made to your size, and most come with a factory-fitted steel or aluminium frame for an easier installation. Side hinged doors are one of the most popular choices in the UK again. If you're replacing an old pair, you can choose from steel, insulated steel and timber, all made to measure.
Steel side hinged doors
Pressed steel doors from our GDO range are made to measure up to 2750mm wide, supplied fully built in a factory-fitted steel frame with the hinges, handles and locking already fitted.
See purpose made steel side hinged doors >
Insulated steel side hinged doors
These are double skinned, foam filled steel doors, and they're our most popular choice. They're stronger, more secure and much better insulated than single skin doors, and they come with a weathersealed aluminium or steel frame fitted at the factory.
- GDO Pro 20mm and 51mm doors, made to measure up to 2750mm wide in 32 colour options
- Carteck 40mm Luxe doors, made to measure up to 3500mm wide
- Ryterna insulated doors, made to measure in ribbed, flush and woodgrain designs
See purpose made insulated side hinged doors >
Timber side hinged doors
Our timber side hinged doors from Cedar and Garador are joinery made, not low grade knotty softwood. Cedar doors are made to measure up to 2743mm wide, with a choice of timber frame options, and can be factory finished in 10 colours, which saves decorating on site.
See purpose made timber side hinged doors >
Standard sizes
Some standard sizes suit a lot of UK single garage openings. A standard size door, such as the Carteck Switch, can sometimes be a quicker or lower cost option, especially when you're replacing a door of a common size. Check our measuring guide or call us on 01926 463888 if you're not sure which suits your opening.
Carteck currently has the best colour choice for insulated sectional garage doors in the UK. Many sectional door brands offer colours chosen for their home country, which don't always suit UK homes. Carteck's standard colours have been chosen specifically for the UK market, and come with clear manufacturer warranties.
What's available
- A wide standard range: up to 39 colour options on Carteck sectional doors, covering almost every UK buyer's needs
- Woodgrain laminate foils: tough, durable timber effect finishes
- Any RAL colour: available at extra cost, if you need an exact match
Smooth or woodgrain texture
You can choose your colour with a smooth or woodgrain textured outer surface. The same colour can look quite different on each, so it's worth thinking about the texture as well as the colour. See What surface finishes and textures are available for garage doors?
Coastal paint upgrade
Salt in the air near the coast is much harder on a garage door finish. Carteck recognise this and offer a coastal paint upgrade for homes near the UK coast, giving extra protection against corrosion and wear.
See our Carteck sectional doors, or call us on 01926 463888 for help choosing a colour.
Carteck have by far the best standard size range, with 15 standard ordering heights and 19 standard ordering widths. You can also order made to measure heights to the millimetre, at very little extra cost and with no change to the delivery time.
Why the size range matters
Sectional garage doors are designed to give the best possible drive through clearance when open, making the most of the garage opening for vehicles to drive in and out. To get the best opening, the door should ideally match the opening size and be installed to the inside face of the opening. The mechanism should also give the full opening height where possible.
How Carteck achieve this
Carteck steel sectional doors use their own operating mechanism, which needs very little headroom. Their wide choice of standard heights was developed specifically for UK garage openings, so you avoid timber or uPVC fillers at the sides or across the top. A door that fits properly looks better, and you get the most performance and drive through space too.
See our Carteck sectional doors, or call us on 01926 463888 for help with sizing.
Yes, in many cases. You can fit a sectional door behind the opening or between it, and standard sizes give you faster delivery and better prices. Your opening doesn't have to match exactly, but you'll need to think about how it will look.
Fitting behind the opening
Ideally, a sectional door is fitted behind the opening, to the inside wall. In this case, the door's ordering size should match the opening size, but it rarely matches exactly.
For example, 2286mm x 2126mm (sometimes shown as 7670, for 7ft 6in x 7ft) is a standard size for many brands. If your opening is 2300mm x 2150mm, this door will still fit, but you'll see part of the frame inside the opening all the way round. If so, order the frame in the same colour as the door, or a colour of your choice, so it looks neat.
* Fitting behind the opening also needs enough side room for the frame and tracks, and enough headroom for the springs and tracks. Check our measuring guide for your chosen door.
Fitting between the opening
Some garages have no inside wall to fit to, or very deep reveals, such as a double garage with a wide brick pier in the middle. In this case, the door can be fitted between the opening.
The ordering size plus the frame gives the overall width and height you need, so your opening must be slightly larger than this to allow fitting tolerance. If the opening is quite a bit larger, you'll need more packing, extra support for the frame, and cladding at the sides and across the top to fill the gaps. It's up to you whether you're happy with how this looks, but it's possible.
See our measuring guide, or call us on 01926 463888 and we'll help you work out whether a standard size will suit your opening.









