19 colour options and 11 standard width options along with 8 standard height options on this high quality galvanised steel up and over garage door.
Order with a choice of canopy or fully retractable operating gear to suit your garage and home.
- Canopy or Retractable Mechanism
- UK Manufactured for over 60 years
- High Quality Galvanised Steel
- 10 Year Warranty
Garador Carlton Steel Up and Over Garage Door in 19 Colours
Vertical Ribs in Your Choice of Colour
The Garador Carlton has narrow vertical ribs and a rivet-free outer face, giving it a straightforward appearance that works with both traditional and modern homes. Dark grey or black gives the ribs a stronger definition, while greens, ivory and browns create a softer, more traditional finish.
Colour can help coordinate the garage door with the rest of the house. Anthracite Grey and Slate Grey work well with grey uPVC or aluminium windows. Moss Green, Fir Green and Chartwell Green suit rural cottages and older brick properties, while Light Ivory complements cream render and stone. Ruby Red or Signal Blue make the garage door a more noticeable feature.
The door is constructed from galvanised steel with a factory-applied powder-coated finish and a steel box-section chassis supporting the panel. No initial painting is required, although regular cleaning and maintenance will help keep the finish and operating gear in good condition.
* The Carlton is also available through our separate Traffic White and White Special Offer listings, as well as in double-width versions. Check the relevant listing for current prices and available sizes.
Choice of 19 Colours
- Traffic White (RAL 9016)
- Jet Black (RAL 9005)
- Terra Brown (RAL 8028)
- Window Grey (RAL 7040)
- Agate Grey (RAL 7038)
- Light Grey (RAL 7035)
- Stone Grey (RAL 7030)
- Anthracite Grey (RAL 7016)
- Slate Grey (RAL 7015)
- Fir Green (RAL 6009)
- Moss Green (RAL 6005)
- Pigeon Blue (RAL 5014)
- Steel Blue (RAL 5011)
- Signal Blue (RAL 5005)
- Ruby Red (RAL 3003)
- Light Ivory (RAL 1015)
- Chartwell Green (Garador reference BS 4800)
- Golden Brown
- Burgundy Brown
* Colours shown on screen are a guide. If you are matching existing windows or an entrance door, check a physical colour sample and the manufacturer's colour reference where available. Not every finish in this range has a RAL reference.
Standard Sizes and Gear Options
The Carlton offers a broad choice of standard single-door sizes, including lower heights and additional intermediate heights that are useful when replacing an existing garage door. The dimensions below are Garador nominal ordering sizes, not the overall steel-frame dimensions or the drive-through clearance.
- 1830mm high: widths of 1984mm and 2134mm, with canopy or retractable gear.
- 1905mm high: widths of 1984mm, 2134mm, 2170mm, 2224mm, 2259mm, 2284mm and 2439mm, with canopy or retractable gear.
- 1931mm high: widths of 1984mm, 2084mm, 2134mm, 2170mm, 2224mm, 2259mm, 2284mm and 2439mm, with canopy or retractable gear.
- 1981mm and 2136mm high: widths of 1984mm, 2084mm, 2134mm, 2170mm, 2224mm, 2259mm, 2284mm and 2439mm, with canopy or retractable gear. Widths of 2590mm, 2744mm and 3049mm are available with retractable gear only.
- 2036mm and 2186mm high: widths of 2134mm, 2170mm, 2224mm, 2259mm, 2284mm and 2439mm, with canopy or retractable gear.
- 2286mm high: widths of 2134mm, 2170mm, 2259mm, 2284mm, 2439mm, 2590mm and 2744mm, with retractable gear only.
Use the Measure tab to find the ordering size code and corresponding internal timber frame or overall steel frame dimensions. Do not use a simple feet to millimetres conversion to calculate the required frame size.
* Purpose made sizes are also available. Please contact us with your opening dimensions if a standard size does not suit.
Can't Find Your Size in the Online Shop?
We are continually updating the sizes available to order online, so not every size shown in the Measure tab will necessarily appear in the shop's drop-down selections.
If your required size is listed but is not showing in the online shop, please call or email us for a price and confirmation of availability. Let us know the ordering size code, your preferred colour, and whether you require canopy or retractable gear.
* A size missing from the online selections does not necessarily mean it is unavailable. Please check with us before choosing a different size.
Canopy or Retractable Gear
Canopy gear uses an overhead torsion spring and vertical side tracks to counterbalance the door. There are no horizontal tracks extending back into the garage, making it a practical choice for manual operation. When fully open, approximately one-third of the door projects outside the opening. An anti-drop safety device is included.
Retractable gear allows the panel to travel back into the garage on horizontal overhead tracks. It is the more straightforward choice if you intend to fit an electric operator, but you will need clear space inside the garage for the tracks and their supports.
* Both mechanisms swing outwards during opening. Leave sufficient space in front of the garage for the door to move without contacting a parked vehicle.
Optional Retractable Plus gear uses modified lifting arms and bottom spring brackets to provide more usable drive-through width at wing-mirror height. It is worth considering where clearance beside your vehicle is tight.
Steel Fixing Frame, Handles and Locking
We recommend a factory fitted steel fixing frame for consistent operating clearances around the panel and a more straightforward installation. Check the selected frame finish and overall dimensions when ordering.
The standard single door steel frame has 55mm wide side sections for canopy gear and 75mm wide side sections for retractable gear. Use the overall dimensions in the Measure tab rather than calculating the framed size from these section widths alone.
The door can also be supplied for installation into a suitable timber fixing frame. An existing frame must be sound, square and correctly sized.
Two-point mechanical locking is standard for manual operation. An optional four point locking upgrade adds further locking points and is available at an additional charge for manually operated doors.
A black nylon handle is supplied as standard, with optional metal handle finishes available to coordinate with other exterior fittings. Check the Options tab for the finishes offered.
Electric Operation
A retractable Carlton can be automated using a compatible Garamatic electric operator. The operator and boom must suit the selected door size and installation space. Canopy automation requires compatible bow-arm conversion equipment and additional clearance checks.
An emergency external release is essential if an automated garage has no other entrance. It allows you to disengage the operator from outside and open the door manually during a power cut.
An optional de-latch security locking kit allows the mechanical locking catches on a compatible retractable door to work alongside the electric operator, releasing when the door opens and re-engaging when it closes.
* Please email or call us to confirm de-latch kit compatibility, obtain a price and arrange to add it
To order, choose your door ordering width and height from the drop-down list. These dimensions refer to the internal ordering frame size. If you are fitting between the structural brickwork aperture, allow for your sub frame and fitting tolerances when calculating your opening size.
Colour Finish & Protection
The 19 colour options use a durable, factory-applied polyester powder-coat finish over high-grade galvanised steel. Unlike standard white doors, all coloured doors are supplied shrink-wrapped for extra protection during transit and handling, and include a colour-matched touch-up paint stick as standard for minor site scuffs.
* The reverse side of coloured steel door panels is finished in an off-white/light grey wash primer as standard.
Factory-Fitted Steel Fixing Frame
We strongly recommend ordering your door with a factory-fitted steel sub frame. Choosing a steel frame ensures tight, factory-set operating tolerances around the panel, speeds up site installation, and eliminates the regular maintenance, warping, and rotting associated with timber sub frames. When ordered with a coloured door, the exterior face of the steel frame is powder-coated in the matching door colour.
|
Canopy mechanism with steel frame |
Retractable mechanism with steel frame |
Handle Options
All doors are supplied with a durable black nylon handle as standard. To complement your property's exterior fittings, you can choose an optional diecast metal design handle in white, brass effect, or chrome effect.
Extra Security 4-Point Locking (Manual Doors Only)
Standard manual doors feature secure 2-point locking into the bottom corners. You can upgrade to a factory-fitted 4-point locking system, adding steel locking rods and latches into the top frame corners as well. When combined with a factory steel frame, the steel slam strips and internal corner plates shield the latch points from external lever attack.
De-Latch Security Locking Kit (Automated Retractable Doors)
When you automate a retractable door, the manual locking catches are typically disconnected so the operator can cycle freely. The optional de-latch kit links the bottom mechanical catches directly to the operator carriage via a release cable. The latches automatically release when opening and mechanically lock back into the frame on closing, giving you 3-point locking combined with the electric motor boom.
* De-latch kits are suitable for retractable doors only and cannot be used on canopy gear. Please email or phone our sales team to check operator compatibility and add this to your order.
Emergency External Release
An emergency external release device is essential if your garage has no other pedestrian access door. It connects a mechanical release cable from the operator towing carriage to either your outside door handle or a separate key barrel, allowing you to disengage the electric drive and open the door manually during a mains power cut.
Remote Control Electric Automation
For smooth automation on retractable doors, we offer the Garamatic electric operator series. Supplied with two multi-button remote hand transmitters, it features smooth soft-start and soft-stop ramping, automatic obstacle obstruction reversal, an internal manual emergency release cord, and an integrated multi-LED courtesy light for low energy consumption.
* Supplied with an operator boom suitable for doors up to 2500mm high. Retractable garage doors are ideal for automation; canopy doors require an additional canopy bow-arm converter or are best left manual.
* Please note: Retractable garage doors do not have a rear panel brace.
Construction & Finish
The Garador Carlton is manufactured from high-grade galvanised steel with a durable, factory-applied polyester powder-coated finish over a rigid steel box chassis.
Choose from 19 factory powder-coated colour options:
- Traffic White (RAL 9016)
- Jet Black (RAL 9005)
- Terra Brown (RAL 8028)
- Window Grey (RAL 7040)
- Agate Grey (RAL 7038)
- Light Grey (RAL 7035)
- Stone Grey (RAL 7030)
- Anthracite Grey (RAL 7016)
- Slate Grey (RAL 7015)
- Fir Green (RAL 6009)
- Moss Green (RAL 6005)
- Pigeon Blue (RAL 5014)
- Steel Blue (RAL 5011)
- Signal Blue (RAL 5005)
- Ruby Red (RAL 3003)
- Light Ivory (RAL 1015)
- Chartwell Green (BS 4800)
- Golden Brown
- Burgundy Brown
Standard Traffic White (RAL 9016) doors are supplied unwrapped. All 18 optional coloured doors are factory shrink-wrapped for transit protection and include a colour-matched touch-up paint stick as standard.
Standard & Extra Locking Options
All manual Garador doors come fitted as standard with secure 2-point slam-latch locking operated by a black handle and euro-profile cylinder.
- Optional 4-point locking upgrade: Available for manual doors at an extra charge. This adds steel locking rods and corner latches to the top of the door panel, providing physical four-corner latching against forced entry.
Canopy Gear (Single Doors Only)
Canopy gear uses vertical jamb tracks and a zinc-plated overhead torsion spring with cast alloy drums to counterbalance the door leaf. There are no horizontal tracks running back into the garage, making canopy gear ideal for straightforward manual installations where ceiling headroom is limited.
When open, roughly one third of the door leaf projects outside the garage opening, forming a canopy.
Single canopy doors include:
- Anti-drop safety device to arrest the door in the event of cable or spring failure
- Zinc-coated torsion spring and cast alloy cable drums
- Two-point mechanical locking
- Black exterior handle and internal latch release
Nominal drive-through clearance reductions:
- Width: opening width minus 40mm
- Height: opening height minus 130mm
Retractable Gear (Single & Double Doors)
Retractable gear pulls the door leaf fully inside the garage along horizontal overhead tracks supported by ceiling or wall brackets. This is the ideal mechanism if you intend to fit a remote-control electric operator.
Single retractable doors include:
- Multi-spring cassettes with protective link-arm covers to prevent finger trapping
- Secure open parking position to prevent uncontrolled closing
- Two-point mechanical bottom locking
- Black exterior handle
Nominal drive-through clearance reductions:
- Width: opening width minus 105mm
- Single-door height: opening height minus 110mm
- Double-door height: opening height minus 140mm
* Clearance figures are nominal gear deductions, not structural aperture deductions. Always allow separately for your fixing sub frame.
Optional Retractable Plus Gear
Retractable Plus gear features specially curved lifting arms and lower spring brackets that clear drive-through space at vehicle wing-mirror height. It is recommended for narrower garage apertures where drive-through clearance is critical.
Available on door heights of 1931mm, 1981mm, and 2136mm, and for door widths up to 2439mm (8'0").
Optional De-Latch Security Locking Kit
When an electric operator is fitted to a retractable door, the manual locking catches are normally bypassed and the operator boom holds the door closed. A de-latch kit links the bottom mechanical latches directly to the operator carriage via a release cable, automatically releasing them on open and locking them into the frame on close for combined mechanical and motor security.
* De-latch kits are suitable for retractable doors only (cannot be used on canopy gear). Please phone or email our team to check operator compatibility and price before ordering.
Installation Guide: Garador Up and Over Garage Doors
Installing a Garador up and over garage door is a straightforward job for a competent tradesperson or experienced DIYer, especially when supplied with a factory steel fixing frame. How the door installs depends on whether you have selected canopy or retractable gear, whether you are fitting a single or double-width door, and whether you are fitting into a new steel sub frame or an existing timber frame.
Factory Steel Sub Frame vs Existing Timber Frame
With a factory steel frame: Single canopy and single retractable doors ordered with a steel frame arrive factory pre-hung as a complete unit. The frame is pre-matched to the door panel with consistent tolerances all round, eliminating the risk of timber rot, warping, or seasonal movement. Installation simply involves offering the complete pre-assembled unit into the opening, squaring it up, and fixing it through the pre-drilled points.
With an existing timber sub frame: If you are hanging a door into an existing timber frame, make sure the timber is completely sound, square, and structurally rigid. The internal width and height between the timber frame legs and head must match the door's nominal ordering size exactly. Any twist or out-of-square in a timber frame will cause the door leaf to bind, rub, or fail to latch properly.
* Note on double doors: Double retractable garage doors (over 10ft wide) are supplied with the steel sub frame in kit form rather than pre-hung. The steel frame is assembled and fixed into the opening first, and the door panel and horizontal track gear are installed into it on site.
Canopy Gear: What to Expect
Canopy doors are ideal when you want to keep the garage ceiling completely clear. The entire operating mechanism — vertical jamb tracks, overhead zinc-coated torsion spring, and cast alloy cable drums — is contained entirely within the door frame.
- No rear tracks: There are no horizontal tracks extending into the garage, so you do not need to fix anything to the garage ceiling or rafters.
- Headroom: Ensure you have sufficient headroom above the frame head for the overhead torsion spring assembly (minimum 55mm to 65mm depending on whether fitting between or behind the aperture).
- Level floor essential: The door frame uprights must sit on a firm, level base. If the floor slopes, the door leaf will not close down evenly across the bottom.
Retractable Gear: What to Expect
Retractable gear pulls the door leaf fully inside the garage on horizontal overhead tracks, counterbalanced by multiple side-spring cassettes on each side. It is the natural choice if you intend to fit an electric operator.
- Internal depth & ceiling fixings: The horizontal tracks run back into the garage slightly further than the full door height. You must have clear, unobstructed space along the ceiling or high side walls to mount the rear track suspension brackets.
- Squaring the tracks: When fixing the horizontal overhead tracks, measure across the diagonals between the tracks and the front frame. Both tracks must be dead level and completely square to the front frame; if the tracks are splayed or out of square, the roller wheels will bind and the door will stick when opening.
Core Installation Steps (Single Pre-Framed Door)
- Check the opening: Measure the structural brickwork opening across the top, middle, and bottom, and vertically on both sides. Check that the opening is square by checking diagonal measurements, and confirm that the floor is level across the threshold.
- Position the frame: Offer the pre-assembled door and frame into the opening. Support it safely with props or wedges so that the frame head is level and the side jambs are completely plumb.
- Check frame diagonals: Measure diagonally from the top corner to the opposite bottom corner in both directions. The two diagonal measurements must be identical before fixing.
- Fix the frame: Secure the frame into the surrounding masonry through the prepared fixing points or anchor brackets using heavy-duty frame fixings. Do not over-tighten fixings initially; tighten progressively while checking that the frame jambs remain straight and do not bow.
- Hang horizontal tracks (Retractable only): Lift and support the overhead horizontal tracks, secure them to the top corners of the front frame, and fix the rear suspension brackets into sound ceiling joists or side walls, ensuring the tracks are level and square.
- Release transit packing: Once the frame is securely fastened, carefully remove transit brackets, safety transit screws, and any protective packaging securing the springs or cables, following the manufacturer's sequence.
- Test manual operation: Operate the door by hand. It should move smoothly without dragging, binding, or shuddering, and sit balanced when released halfway. Check that the mechanical latches align and engage cleanly into the frame keeps.
Installing an Electric Operator
Automating an up and over door adds convenience and security, but the operator must be installed correctly to work safely with the door's balance mechanism.
- Door condition comes first: An electric operator will not fix a badly fitted, sticking, or unbalanced garage door. The door must open and close smoothly and balance properly by hand before an operator is installed.
- Automating retractable doors: Retractable doors are designed for straightforward automation. A standard ceiling-mounted boom operator (such as a Garador GaraMatic) is installed down the centre of the garage ceiling. The towing arm connects directly from the operator carriage to the top of the door leaf. Standard bottom mechanical locking catches are typically bypassed, as the motor carriage positively locks the door closed at the top. Alternatively, an optional de-latch kit can be fitted to retain the bottom mechanical catches.
- Automating canopy doors: Because a canopy door pivots outward at the top and runs in vertical tracks, it cannot be pulled straight back by a standard operator boom. You must fit a canopy bow-arm converter (or a dedicated canopy lifting device) to the back of the door panel. The bow arm transfers the horizontal pull of the operator boom into the vertical and swinging motion needed to lift the canopy door. Note that a traditional bow-arm converter reduces the drive-through clearance height in the centre by roughly 100mm to 130mm when open.
- Fit an emergency external release if required: If your garage has no other pedestrian side door or entrance, you must install an emergency external manual release kit. In the event of a power cut or motor failure, this allows you to disconnect the electric drive carriage from outside using a key and open the door manually.
- Safety limits and force testing: After installing the motor, set the open and close travel limits carefully so the door closes snugly without forcing the panel down onto the floor. Always test the automatic safety reverse function by placing a solid obstacle on the floor to verify that the door reverses immediately on contact.
Garador Steel Up & Over Garage Doors – Manufacturer Warranty Details
When you purchase a Garador steel Up & Over garage door through Garage Doors Online, your door is backed by Garador’s official manufacturer warranty, ensuring long term reliability and peace of mind.
Summary of Warranty Periods
- 10 Year Limited Warranty: Covers the safe and reliable operation of the complete steel door leaf, the factory steel sub fixing frame (where supplied), and the primary mechanical chassis structure against manufacturing or material failure.
- 5 Year Guarantee on Operating Components: Covers the counterbalance springs, wire cables, track rollers, hinges, and guide rollers under normal domestic use (defined as up to 5 door open and close operations per day).
- 5 Year Operator Warranty (GaraMatic Motors): If supplied with an electric GaraMatic operator, the mechanical motor drive, boom rail, and internal electronic control board are covered for 5 years.
- 2 Year Radio & Accessory Warranty: Covers remote control hand transmitters, radio receivers, external wall consoles, keypads, and safety accessories.
- 6 Month Replacement Parts Cover: Genuine replacement parts fitted under warranty carry a 6 month guarantee or the remainder of the original warranty term, whichever is longer.
Warranty Conditions
For your warranty to remain fully valid:
- The door and any automated equipment must be installed, aligned, and adjusted in strict accordance with Garador’s official installation and user instructions.
- The product must be used purely for domestic purposes and operated within its specified design limits.
- All mechanical pivots, bearings, rollers, and latches must be inspected periodically and kept clean and lightly lubricated.
- Painted polyester finishes should be washed down periodically with warm water and a non abrasive sponge to remove atmospheric road dirt and salt deposits.
- Any accidental chips or surface scratches must be touched up promptly using suitable touch up paint to prevent oxidisation or corrosion spreading.
- Repairs or adjustments must be carried out using only genuine Garador replacement parts.
*Warranty cover applies to the original purchaser at the registered delivery and installation address and is non transferable.
Standard Exclusions
The manufacturer warranty does not cover:
- Normal wear and tear beyond specified guarantee cycles.
- Consumable items such as handset batteries, fuses, and internal light bulbs.
- Cosmetic transit or site damage (such as scratches, scuffs, or dents) occurring after delivery or during third party installation.
- Damage caused by external chemical influences, fire, flood, standing water, road salt, or abnormal environmental conditions.
- Installations in aggressive coastal or high humidity marine environments (within 3 miles of the sea) unless an appropriate specialist coastal specification was approved prior to purchase.
- Dismantling, re-installation, or courier carriage costs incurred during a claim.
Making a Warranty Claim
In the unlikely event of a defect, please have the following information ready:
- Your original Garage Doors Online order number or invoice.
- The product serial number (located on the silver data plate on the rear edge of the door leaf).
- A clear description and photographs showing the door issue and overall opening.
Please send these details to Garage Doors Online customer support, and we will liaise directly with Garador technical services on your behalf.
Garador Horizon and Carlton Standard Single-Door Sizes
Can't Find Your Size in the Online Shop?
We are continually updating the sizes available to order online, so not every size shown in the table below will necessarily appear in the shop's drop-down selections.
If your required size is listed in the table but is not showing in the online shop, please call or email us for a price and confirmation of availability. Let us know whether you require a Garador Horizon or Carlton, the ordering size code, your preferred colour, and canopy or retractable gear.
* A size missing from the online selections does not necessarily mean it is unavailable. Please check with us before choosing a different size.
| Ordering size code |
Internal frame size For timber sub frames Width × height (mm) |
Steel-framed canopy Overall frame size* Width × height (mm) |
Steel-framed retractable Overall frame size* Width × height (mm) |
|---|---|---|---|
| 6660 | 1984 × 1830 | 2094 × 1888 | 2124 × 1888 |
| 6663 | 1984 × 1905 | 2094 × 1963 | 2124 × 1963 |
| 6664 | 1984 × 1931 | 2094 × 1989 | 2124 × 1989 |
| 6666 | 1984 × 1981 | 2094 × 2039 | 2124 × 2039 |
| 6670 | 1984 × 2136 | 2094 × 2194 | 2124 × 2194 |
| 61064 | 2084 × 1931 | 2194 × 1989 | 2224 × 1989 |
| 61066 | 2084 × 1981 | 2194 × 2039 | 2224 × 2039 |
| 61070 | 2084 × 2136 | 2194 × 2194 | 2224 × 2194 |
| 7060 | 2134 × 1830 | 2244 × 1888 | 2274 × 1888 |
| 7063 | 2134 × 1905 | 2244 × 1963 | 2274 × 1963 |
| 7064 | 2134 × 1931 | 2244 × 1989 | 2274 × 1989 |
| 7066 | 2134 × 1981 | 2244 × 2039 | 2274 × 2039 |
| 7068 | 2134 × 2036 | 2244 × 2094 | 2274 × 2094 |
| 7070 | 2134 × 2136 | 2244 × 2194 | 2274 × 2194 |
| 7072 | 2134 × 2186 | 2244 × 2244 | 2274 × 2244 |
| 7076 | 2134 × 2286 | Not available | 2274 × 2344 |
| 7163 | 2170 × 1905 | 2280 × 1963 | 2310 × 1963 |
| 7164 | 2170 × 1931 | 2280 × 1989 | 2310 × 1989 |
| 7166 | 2170 × 1981 | 2280 × 2039 | 2310 × 2039 |
| 7168 | 2170 × 2036 | 2280 × 2094 | 2310 × 2094 |
| 7170 | 2170 × 2136 | 2280 × 2194 | 2310 × 2194 |
| 7172 | 2170 × 2186 | 2280 × 2244 | 2310 × 2244 |
| 7176 | 2170 × 2286 | Not available | 2310 × 2344 |
| 7363 | 2224 × 1905 | 2334 × 1963** | 2364 × 1963** |
| 7364 | 2224 × 1931 | 2334 × 1989 | 2364 × 1989 |
| 7366 | 2224 × 1981 | 2334 × 2039 | 2364 × 2039 |
| 7368 | 2224 × 2036 | 2334 × 2094 | 2364 × 2094 |
| 7370 | 2224 × 2136 | 2334 × 2194 | 2364 × 2194 |
| 7372 | 2224 × 2186 | 2334 × 2244** | 2364 × 2244** |
| 7563 | 2259 × 1905 | 2369 × 1963 | 2399 × 1963 |
| 7564 | 2259 × 1931 | 2369 × 1989 | 2399 × 1989 |
| 7566 | 2259 × 1981 | 2369 × 2039 | 2399 × 2039 |
| 7568 | 2259 × 2036 | 2369 × 2094 | 2399 × 2094 |
| 7570 | 2259 × 2136 | 2369 × 2194 | 2399 × 2194 |
| 7572 | 2259 × 2186 | 2369 × 2244 | 2399 × 2244 |
| 7576 | 2259 × 2286 | Not available | 2399 × 2344 |
| 7663 | 2284 × 1905 | 2394 × 1963 | 2424 × 1963 |
| 7664 | 2284 × 1931 | 2394 × 1989 | 2424 × 1989 |
| 7666 | 2284 × 1981 | 2394 × 2039 | 2424 × 2039 |
| 7668 | 2284 × 2036 | 2394 × 2094 | 2424 × 2094 |
| 7670 | 2284 × 2136 | 2394 × 2194 | 2424 × 2194 |
| 7672 | 2284 × 2186 | 2394 × 2244 | 2424 × 2244 |
| 7676 | 2284 × 2286 | Not available | 2424 × 2344 |
| 8063 | 2439 × 1905 | 2549 × 1963 | 2579 × 1963 |
| 8064 | 2439 × 1931 | 2549 × 1989 | 2579 × 1989 |
| 8066 | 2439 × 1981 | 2549 × 2039 | 2579 × 2039 |
| 8068 | 2439 × 2036 | 2549 × 2094 | 2579 × 2094 |
| 8070 | 2439 × 2136 | 2549 × 2194 | 2579 × 2194 |
| 8072 | 2439 × 2186 | 2549 × 2244 | 2579 × 2244 |
| 8076 | 2439 × 2286 | Not available | 2579 × 2344 |
| 8666 | 2590 × 1981 | Not available | 2730 × 2039 |
| 8670 | 2590 × 2136 | Not available | 2730 × 2194 |
| 8676 | 2590 × 2286 | Not available | 2730 × 2344 |
| 9066 | 2744 × 1981 | Not available | 2884 × 2039 |
| 9070 | 2744 × 2136 | Not available | 2884 × 2194 |
| 9076 | 2744 × 2286 | Not available | 2884 × 2344 |
| 1066 | 3049 × 1981 | Not available | 3189 × 2039 |
| 1070 | 3049 × 2136 | Not available | 3189 × 2194 |
* No fitting clearance is included in the overall frame dimensions. If fitting between the brickwork, the opening must be at least 10mm wider and 5mm higher than the overall steel frame. These are total fitting allowances, not allowances per side.
If a listed size is not available in the ordering drop-downs, please email or call us to confirm availability and obtain a price.
*Fitting tolerance: No fitting clearance is included in these dimensions. If fitting between the brickwork aperture, your structural opening must be at least 10mm wider and 5mm higher than the overall frame size to allow for fitting tolerance and squareness.
Canopy Gear
Retractable Gear
Our Promise
We pride ourselves on our customer service and are always happy to help