GDO Mid Vertical (18 Colour Options) Up and over garage door Steel GDO

01926 463 888
GDO Mid Vertical (18 Colour Options) Steel Up and Over
GDO
GDO Look at our customer reviews on trustpliot
Up and Over Steel GEAR TYPE: Canopy, Retractable

For a limited period only, upgrade from standard White (RAL9016) to one of our best selling 17 colour options for no additional cost.

The GDO Mid Vertical Steel Up and Over Garage Door is a good choice if you require a basic, good quality, low cost, steel one piece up and over garage door.

The Mid vertical design offers wider spacing of the vertical lines for a more contemporary visual appearance.
Available in several standard sizes and fitted with either retractable or canopy type operating gear. White (RAL 9016) is the standard colour but with 17 optional colours at a small extra charge. 

Ordering size does not include the fixing frame dimensions, see measuring tab.

  • Large Range of Standard & Purpose Made Sizes
  • 18 Factory Finished Colour Options
  • Easy Fit With Pre Fitted Steel Sub Frame
  • Manufactured in the UK
1
Choose Your Sizes
Web Price from: £428.40 Inc. VAT
£357.00 Ex. VAT

Basic steel up and over garage door in a traditional but wider spaced vertical ribbed design. Pre-finished in white as standard and available in all of the most popular standard sizes in the UK.

The sizes always refer to the inside dimensions of the sub frame, i.e. the daylight opening dimensions. If you are fitting inbetween a structural opening make sure you include the dimensions of the timber or steel sub frame used. i.e. a 7066 size will not fit into a 7066 brickwork opening, the size of the brickwork opening needs to be wider and higher to accomodate the sub frame (usually around 3 inches all the way round would give you plenty of space and tolerance, so 7'6" wide and 7'3" high).

If you are fitting behind the brickwork opening then the opening simply needs to be a little larger than the ordering size but with space available inside the opening to accomodate the sub frame when face fitting from inside

Available without a steel sub frame for installation to a timber sub frame or with a factory fitted steel sub frame to fit directly to your structural opening.

4 point locking - FOR MANUAL DOORS ONLY
We offer the option to have 4 points of internal locking rather than the standard 2 point locking making the door considerably harder to break into by force.

 

A 800 XL Next-Generation Garage Door Operator, including 2x hand-held Transmitters - SUITABLE FOR RETRACTABLE DOORS ONLY
·         Max. gate width/gate height: 6,000 mm / 2,500 mm
·         Max. gate weight: 140 kg
·         Max. pulling and pushing force: 800 N
·         Max. carriage speed: 180 mm/s

QUALITY
·         Universal drive for sectional doors, overhead doors, up-and-over doors, tilting doors*, side sectional doors
·         LED technology: long-lasting, efficient lighting
·         Made in Germany
·         Energy-saving: < 1 watt standby (corresponds to approx. £1.30 electricity costs per year)
 
SECURITY
·         Motor with a high level of self-locking and active counter-pressure in the event of an attempted break-in at any point
·         Wear-free chain for high tensile strength
·         Connection option for battery pack for emergency operation in the event of a power failure
·         Cyclically tested safety devices
·         The carriage can be engaged and disengaged at any position using the emergency release (cord to pull).
·         Bidirectional, encrypted radio system. 
 
INTELLIGENCEGDO 800XL hand-held transmitter
·         Automatic learning process: self-learning force curve with continuous adjustment
·         Optimized speed profiles for fast opening and safe closing
·         Standard-compliant operation
·         Automatic optimization of the door travel through direct input of the measured operating forces
·         Transmission-friendly soft start / stop
·         Automatic end position detection in door CLOSED when teaching, the closing pressure can also be individually adapted to the structural conditions
 
 
TECHNICAL INFORMATION
 
POWER SUPPLY
220-240VAC
RATED FREQUENCY
50/60Hz
NUMBER OF RADIO MEMORY LOCATIONS (HANDHELD TRANSMITTER COMMANDS ONLY)
20
MOVEMENT STROKE STANDARD
2,750mm
MOVEMENT STROKE EXTENDED (MAX. EXTENDABLE BY)
6,038mm (3 x 1,096mm)
DUTY CYCLE AFTER S3
40%
OPERATING TEMPERATURE
-25°C to +65°C
WORKPLACE-RELATED EMISSION VALUE
< 59 dBA (drive only)
DEGREE OF PROTECTION
IP21
MAX. PULL AND PUSH FORCE
800N
NOMINAL PULLING FORCE
240 N
RATED CURRENT CONSUMPTION
0.65A
RATED POWER CONSUMPTION
130W
POWER CONSUMPTION STANDBY (IN POWER SAVING MODE)
< 1w
MAX. SPEED
180mm/s
HIGH SECTIONAL, UP-AND-OVER AND OVERHEAD DOORS
2,500mm
HEIGHT OF SIDE SECTIONAL AND ALL-ROUND DOORS
2,800mm
WIDE SECTIONAL, UP-AND-OVER AND OVERHEAD DOORS
6,000mm
WIDE SIDE SECTIONAL AND ALL-ROUND DOORS
2,500mm
MAX GATE WEIGHT
140kg

The GDO up and over garage doors are available in a range of standard and purpose made sizes and the first option to decide upon is whether to use canopy or retractable operating gear.

Both have their advantages and disadvantages and generally you have canopy gear is you only every want a manual door and retractable if you want to add an electric operator to the door.

Canopy with steel frame

Canopy mechanism with steel frame

Retractable up and over door
Retractable mechanism with steel frame

The Canopy gear has a preassembled torsion spring above the door panel which lifts the door panel via a cable either side and once opened the door panel sticks out about a third and hence the name ‘canopy’

Retractable operating gear has arms either side lifting the door panel both assisted by tension springs. The motion of the retractable door is far more direct which means it does swing out more but ends up fully retracted inside the garage on the horizontal rails the door slides along. Fitting an electric operator to a retractable garage door is very easy indeed as long as you have the headroom and length to take the operator and its boom. 

Colour Finish
Choose from 18 standard powdercoat finished colours with the standard white at no extra charge (RAL9016)
GDO Handle optionDoor panel is finished inside and out in the same colour chosen
 

Handle Option
We offer a standard black handle with euro profile cylinder locking or the option of no handle at all and no hole drilled either when you are putting an electric operator onto the door.
(Most other up and over door brands are not able to offer the door without the handle hole drilled)

Factory Fitted Steel Sub Frame
This is an option we recommend as you receive a door with the frame already fitted and ready to fit into the garage aperture. The frame is a box section steel finished in either white or any of the other colours offered.
It is a 50mm wide frame all round the door on all the steel up and over doors so for the OVERALL dimensions simply add 100 mm to the ordering width and 50mm to the ordering height.
 

4 point locking
We offer the option to have 4 points of internal locking rather than the standard 2 point locking making the door considerably harder to break into by force.

 

All doors have a strong sub-chassis with bracing plates to ensure rigidity of the door panel.

The Up and Over doors feature a simple but effective cable operated latches that are engaged and disengaged with the locking handle.

Canopy Gear is spring assisted and provides a simple and effective solution for doors up to 8ft wide.

Retractable doors run on smooth polymer rollers in suspended tracks and are perfect for remote control operation.

Choose from the classic low gloss solid colours as below:
White RAL 9016
Jet Black RAL 9005
Anthracite Grey RAL 7016
Traffic Grey RAL 7042
Window Grey RAL 7040
Light Grey RAL 7035
Light Blue RAL 5012
Signal Blue RAL 5005
Steel Blue RAL 5011
Fir Green RAL 6009
Moss Green RAL 6005
Chartwell Green BS 14 C 35
Brown RAL 8017
Mahogany Brown RAL 8016
Clay Brown RAL 8003
Terracotta Brown RAL 8004
Ruby Red RAL 3003
Ivory RAL 1015

Installation Instructions are provided with every door.

1.Warranty Period.

A warranty covering the safe and reliable operation of the garage door for a period of 10 years from the date of purchase is given to the original purchaser.
The purchaser is given a 2 year warranty for all springs; tracks; rollers; and hinges for normal use, whereby normal use constitutes no more than 5 operations (open/close) per day. We recommend that they are inspected annually by a competent engineer. The warranty period for replacement parts is 6 months or for the remainder of the warranty period.

2. Requirements.
Warranty is valid in the country where the garage door was purchased.
The product must have been purchased through one of our authorised partners and a barcode and receipt of purchase provided.
The warranty only covers damage to the garage door.

3. Performance.
During the warranty period we will rectify defects to the Fort product that can be proved to be material or manufacturing faults. At our discretion we will either exchange; repair; or reduce the price. We will not accept any costs for dismantling; installation; or delivery.
The warranty does not cover damage caused by:
Improper transport and fitting.
Repairs by non-qualified or non competent individuals.
External influences such as fire, water, alkaline solutions, acid, bird droppings or abnormal atmospheric pollution.
The use of non Fort Doors parts without the approval of the manufacturer.

Additional Information
It is a fundamental condition of this guarantee that the product has been installed, maintained and serviced correctly and is used solely for the purpose for which it was designed.
Incorrect installation, maintenance and service will invalidate this warranty.
The door must be kept in a clean condition and free from impact damage.

 

GDO Canopy Up and Over Steel garage door Measuring Guide

 

GDO Retractable Up and Over garage door Measuring Guide

A: When measuring for any garage door always remember there is a fixing sub frame to include in all calculations, below is a guide on how to measure f

(read more)
Tuesday 10th March 2015 at 12:00am
A: Yes of course, and the choice of colours was recently extended to include the colours as generally available in sectional doors as well. For the b

(read more)
Friday 30th May 2014 at 12:00am
A: Generally for all [1] the order sizes refer to the dimensions of the inside of the fixing sub frame which can be a steel or timber frame. The over

(read more)
Sunday 22nd January 2012 at 12:00am
A: They are always delivered by either the manufacturer or ourselves in specialised transport vehicles. The smaller items such as the remote control o

(read more)
Wednesday 28th September 2011 at 12:00am
A: Most doors and electric operators are supplied with full printed installation instructions. The instructions can also be found in our [1]sectio

(read more)
Monday 5th September 2011 at 12:00am
>
Our Promise

We pride ourselves on our customer service and are always happy to help

We use cookies to provide you with a better website experience. Close this popup to carry on browsing, or click here to find out more about cookies