Gliderol Industrial Roller Door Continuous Steel Curtain (3 Colour Options) Roller door single skin garage door Steel Gliderol

01926 463 888


Gliderol Industrial Roller Door Continuous Steel Curtain (3 Colour Options) Steel Roller door - single skin
Gliderol
Gliderol Look at our customer reviews on trustpliot
Roller door - single skin Steel GEAR TYPE: Roller Shutter

The Gliderol Series B is a continuous sheet curtain roller shutter door and is ideal for light industrial/commercial use.

Please Note: No handsets are included. If there is no other access, an external manual release will be required (for automated doors only).

  • Manual or Electric Operation options
  • Available up to 5000mm wide and all fully finished in choice of colours
  • External electric motor drive with obstacle safety detection as standard
  • Made to measure for the perfect fit
1
Choose Your Sizes
Web Price from: £831.60 Inc. VAT
£693.00 Ex. VAT

The Gliderol Series B roller shutter is available up to a maximum width of approximately 16'4" (5000mm) and a maximum height of 16'3" (4900mm).

Built with a highly durable material named the Polyglide™, each door is afforded effortless operation and has been tested to withstand upto 22,000 cycles (based on 3 cycles per day).

Please Note: No handsets are included. If there is no other access, an external manual release will be required (for automated doors only).

The Gliderol Series B roller shutter door is ideal for light industrial/commercial use.

> Spring assisted mechanism
> Weatherseal - Durable weatherseal helps prevent any undesirable material entering your garage.
> Bottom Rail - Constructed in Aluminium, designed to help prevent any intruder entering your garage. Provides security and strength.
> Chain Guide
> Prevents the chain from slipping or releasing from the chain wheel.

Laminate Colour Options:
Golden Oak
Rosewood
Mahogany

The Glidermatic IGDU is specifically designed for continuous curtain roller doors, supplying more than sufficient force to lift almost any commercial roller door without exerting undue stress on the door. The operator can be factory fitted or retrofitted on site and comes with a fully insulated control box with built in switches and a wall mounted waist high manual override.
 

• Domestic/Residential use - 10 years corrosion free on door panel excludes paint surface rubbing or fading. (Mini Roller door has 1 year total warranty cover).
1 year on the lock and face plate, spring, bottom roller, weatherseal and polyglide, if fitted by an authorised Gliderol Distributor or Gliderol Technician.
3 month warranty on spring tension.
• Industrial/Commercial use - 1 year on the lock and face plate, spring, bottom roller, weatherseal and polyglide, if fitted by an authorised Gliderol Distributor or Gliderol Technician. 3 month warranty on spring tension.
The manufacturer strongly recommends that all Gliderol products be serviced by an authorised Gliderol Distributor or Gliderol Technician every 12 months to ensure longevity of the products’ life. Failure to do this may result in any warranty being invalid.
Warranties of 2 years electrical, 5 years tubular motors, 6 years mechanical and 10 years paint finish apply to all Gliderol doors (except Mini Roller
Doors see above).
Garage doors should be inspected upon installation and viewed in natural daylight (not direct sunlight) from a standard distance of 3 metres to view their overall appearance. From this distance the door panel should appear free from visible marks or distortion, stains, blemishes, indentations or scuffs.
Only marks visible from a distance of more than 3 metres will be considered under warranty.
PRODUCT WARRANTY CONDITIONS
Warranty Conditions
1. Subject to the under mentioned specific limitations and exceptions, the Manufacturer warrants all new doors, motors and electronic components of its
manufacture to be free from defect in workmanship under normal use and service and further warrants all installation carried out by the Manufacturer or by its nominated installers to be free from defects and workmanship its obligations hereunder being limited to making good any such defect PROVIDED THAT notice of any claimed defect in material workmanship in or resulting from installation of any door shall have been given to the Manufacturer within the period from date of installation as prescribed in the schedule hereto.
2. This warranty does not apply to any defect, loss or damage arising or caused directly or indirectly by or as a result of;
(i) Any masonry rendered or other surfaces cracking or collapsing during installation of the door.
(ii) Any defect or deterioration of timber including drying out after installation.
(iii) Any weakening or collapse of the structure to which the doors are affixed occurring any time after installation.
(iv) Any damage to or deterioration in the condition of the doors occurring in transit by customer nominated or appointed carrier or occurring after delivery and prior to installation.
(v) Any defect (including defects in component parts or accessories) rising from or attributable to the failure to carry out normal preventive maintenance or adjustment.
(vi) To any additional defect damage or deterioration arising from or attributable to the operation of the door after it is known to be defective.
(vii) Any door being installed within 800 metres of the sea or other body of water of equivalent or greater salt concentration or in an area subject to industrial fall out.
(viii) Any fault or surge in customer’s electricity supply.
(x) The door striking an immovable object during travel.
(xi) Garage doors should be inspected upon delivery and viewed in natural light (not direct sunlight) from a standard distance of 3 metres to view their overall appearance. From this distance the door panel should appear free from marks or distortion, stains, blemishes, indentations or scuffs. If any marks are only visible within 3 metres they will not be considered under warranty.
3. Items excluded from warranty;
(i) Batteries
(ii) Fuses
(iii) Globes
(iv) Sensitivity adjustments
(iiv) Minor factory repairs
4. While Gliderol doors are long lasting and hard wearing under normal conditions this warranty does not extend to inherent defects in steel or other material used in the manufacture. The Manufacturer will however, procure and assign to the customer the benefit of the warranty of the manufacturer of the steel or other material.
5. If Manufacturer has at request of customer procured painting, powder-coating or other surface application to its product this warranty does not extend to such painting, powder-coating or other surface application. For this purpose Manufacturer at all times acts as agent of customer. Manufacturer may as a
service to the customer but without any legal obligation to do so, assist customer to obtain redress in respect of any defect.
6. The Manufacturer reserves the right to touch up on site the paint finish and or pre-painted surfaces on its range of garage doors but no responsibility will be taken for the possibility of any paint rubs, scuffing etc on the internal wash coat finish or external painted surface.
7. Proof of purchase MUST be provided to the manufacturer at time of warranty claim. If proof is not available any warranty may be invalid.

The ordering width is the daylight opening between the guides PLUS 100mm.

The ordering height is the height of the side guide rails NOT including the roller curtain which will vary from 460 - 530mm depending on the door height.

Side room required for installation will vary from 150 - 225mm depending on the height of the door and the mechanism supplied for the chain operation.

Gliderol Light Industrial Roller Door Measuring Diagram

A: We recommend you think about this a lot more these days as so many customers are not putting a vehicle into their garage (over 65% according to the

(read more)
Monday 12th February 2024 at 12:00am
A: In reality there are differences between how you measure and order a roller garage door depending on the brand, type of door and where you are goin

(read more)
Monday 12th February 2024 at 12:00am
A: The simplest answer to this is that they don't lock, well not in the usual definition of locking, apart from maybe the manual operated doors, which

(read more)
Monday 12th February 2024 at 12:00am
A: Yes, they certainly can be, as long as the door is from a reputable manufacturer, who has spent time developing the door and giving serious thought

(read more)
Monday 12th February 2024 at 12:00am
A: Insulated Roller Doors can be fitted externally when they have a full hood cover and appropriate manual releases. Continuous curtain, single skin s

(read more)
Wednesday 2nd September 2015 at 12:00am
A: Yes of course and it quite often may be necessary if you do not have a brick return face to install to.... All sectional and roller garage doors i

(read more)
Thursday 27th March 2014 at 12:00am
A: The Series A and AA [1] steel roller doors are ordered differently to most other roller garage doors in that you follow a simple set of rules whic

(read more)
Monday 12th December 2011 at 12:00am
A: They are always delivered by either the manufacturer or ourselves in specialised transport vehicles. The smaller items such as the remote control o

(read more)
Wednesday 28th September 2011 at 12:00am
A: Most doors and electric operators are supplied with full printed installation instructions. Many PDF installation instructions can also be found

(read more)
Monday 5th September 2011 at 12:00am
>
View all in the Roller door - single skin range >
Our Promise

We pride ourselves on our customer service and are always happy to help

We use cookies to provide you with a better website experience. Close this popup to carry on browsing, or click here to find out more about cookies