Our full list of Questions and Answers is shown below, click on the more link to see the detailed answers to some of the questions.
ThermoFrame is an optional plastic profile that fits between the steel frame of a Hormann sectional door and the brickwork. It stops heat escaping through the steel frame, and it adds extra seals at the sides and top of the door. Hormann say it can improve the door's insulation by up to 15%.*
Why the frame matters
Hormann's insulated sectional doors, the LPU 67 Thermo and the LPU 42, have double skinned, foam filled panels that insulate very well. The weak point is the steel frame, because steel conducts heat easily. Without a thermal break, warmth can travel through the frame and out through the brickwork. ThermoFrame separates the two.
As a guide, a fitted LPU 67 Thermo is rated at around 1.0 W/m²K without ThermoFrame, and around 0.88 W/m²K with it.**
When it's worth adding
- Integral garages, or garages with a room above
- Garages used as a workshop, gym, office or hobby room
- Where you want the best insulation the door can give
Fitting considerations
ThermoFrame only works with the door fitted behind the opening, fixed to the inside face of the brickwork. It also needs slightly more headroom than a standard frame. If you need to fit between the opening, a timber subframe can create a face to fit the door behind, so you can still use ThermoFrame. A timber frame can also be finished to match your windows or other doors.
ThermoFrame is an optional extra and can be selected on many of our Hormann sectional doors. Please contact us or call 01926 463888 for prices and advice.
* Hormann figure for an LPU 42 door, 5000 x 2250mm.
** For a 5000 x 2250mm door without glazing. Figures vary with size and specification.
For a steel up and over door, the Garador Guardian range is the one to look at. It was the UK's first range of steel up and over doors certified to the police preferred Secured by Design standard, and it's tested to STS202 Level 1 to resist attack with crowbars, chisels and heavy hand tools.
Garador make their doors in Yeovil and are part of the Hormann Group. The Guardian starts with the standard Garador steel up and over door and adds a lot of extra security.
What makes the Guardian more secure
- Four point locking, with steel rods latching both top corners and both bottom corners
- A heavy gauge steel plate behind the lock body, to stop drill and punch attacks
- An anti snap lock cylinder with a sacrificial cut line, so the core stays locked if the front is snapped off
- Eight full length rear braces instead of two, with over 70 extra spot welds to stop the door flexing under jemmy attack
- Steel corner guard plates to protect the bottom latches from levering
Designs and colours
There are three designs: the Carlton (vertical ribbed), the Salisbury (Georgian panelled) and the Horizon (horizontal ribbed). All are available with canopy or retractable gear. They're factory finished in Traffic White (RAL 9016) as standard, with six optional powder coated colours. Garador also make matching Secured by Design front entrance doors.
* To keep the Secured by Design accreditation, the Guardian must be fitted with its factory steel subframe, using heavy duty masonry sleeve fixings into sound brickwork or blockwork. It can't be fitted to an old timber frame.
Other secure options
If you'd prefer a different design or more colour choice, a Hormann steel up and over door with the optional 4 point locking and steel subframe also gives a high level of security. If security matters more than the type of door, double skinned insulated side hinged doors are also available with LPS1175 or RC2 security ratings.
Call us on 01926 463888 for advice on the right door for your garage.









