Hormann 2602 Finesse Stock Sizes (Anthracite Grey) Up and Over Steel Hormann

Hormann 2602 Finesse Steel Up and Over Garage Door in Anthracite Grey

The Hormann 2602 Finesse brings a sleek, horizontal profile to the proven Series 2000 steel up and over platform. While the 2601 Elegance uses vertical panels, the 2602 Finesse is pressed with wide horizontal ribs that give the door a broad, modern appearance. This linear styling works particularly well on standard single garages by visually stretching the opening width, making it a natural match for properties with horizontal timber cladding, modern brickwork, or grey architectural window frames.

Supplied factory finished in durable powder coated Anthracite Grey (RAL 7016), this door requires minimal ongoing maintenance. This listing covers our fast-track stock sizes in Anthracite Grey, giving you genuine Hormann engineering, high security mechanical rotary locking, and fast delivery from UK stock.

Available Stock Sizes

The 2602 Finesse is stocked in the four most common UK single opening sizes. Sizing refers to the nominal door leaf dimension / inside frame opening (daylight width x height):

• 7066: 7ft 0in wide x 6ft 6in high (2134mm x 1981mm)
• 7070: 7ft 0in wide x 7ft 0in high (2134mm x 2134mm)
• 7666: 7ft 6in wide x 6ft 6in high (2286mm x 1981mm)
• 7670: 7ft 6in wide x 7ft 0in high (2286mm x 2134mm)

Operating Mechanism: Canopy vs Retractable

You can choose between canopy and retractable operating gear depending on how you intend to use and operate your garage:

• Canopy Gear: A compact overhead torsion spring lifts the door, guided by vertical side tracks. When fully open, around one third of the door leaf extends outward past the brickwork to form an external canopy. Because there are no horizontal tracks projecting into the garage, canopy gear leaves your internal ceiling and side wall storage completely clear. Canopy doors are engineered primarily for easy manual hand lifting.
• Retractable Gear: Uses heavy gauge side coil springs and horizontal overhead tracks that extend into the garage. The entire door leaf glides inside the building when open, leaving no overhang outside. Retractable gearing is required if you plan to automate the door with a remote control electric operator, and it delivers exceptionally light, balanced manual operation.

Why We Always Recommend the Factory Steel Sub Frame

An up and over garage door must be fitted within a fixing sub frame. While fitting to an existing sound timber frame is possible, ordering your 2602 Finesse with the factory steel box section sub frame offers clear practical benefits:

• Zero Maintenance and Colour Matched: The steel sub frame is fully galvanised and powder coated in the identical Anthracite Grey finish as the door leaf, eliminating timber rotting, warping, and repainting.
• Factory Pre-Assembled Gearing: When ordered with the steel frame, the springs, side arms, and running gear come pre-fitted directly to the frame from the factory. This cuts fitting time significantly and ensures square alignment from the moment you lift it into the opening.
• Enhanced Security: The tight steel-on-steel rebate between the frame and door leaf leaves minimal pry gaps, offering vastly superior resistance to crowbar attack compared to an old timber frame.

*The steel sub frame adds either 60mm or 75mm per side and 60mm across the head (depending on whether canopy or retractable gear is selected). Always check your overall brick opening measurements.

Factory Fitted Steel Fixing Frame

The steel sub frame offered as an option is also finished in the same white finish as the door and saves a lot of time and money over a timber sub frame option whilst also offering tighter tolerances around the edges of the door panel.

We recommend the steel sub frame for all up and over garage doors.

We offer 2 sizes for the steel sub frame, a 60mm wide frame which can only be used on the canopy operating mechanism and a 75mm wide frame which is offered on the canopy or retractable gear mechanism. The retractable operating gear can only have the 75mm frame option.

Canopy mechanism with steel frame

Retractable mechanism with steel frame

Choose Handle Option
Choose from a selection of high quality round handles to include euro cylinder security locking with a 2 point internal locking rod system as standard.

A choice of a standard nylon black handle or various aluminium and stainless steel options.

Extra Security Locking
Upgrade to a 4 point locking rod system for the best security and resistance to force entry. The Hormann locking rod system combined with a steel sub frame utilises the steel closing lip along with strategically placed steel plates to prevent easy access to the internal locking catches for the door.

With each locking latch in each corner this is a hard door to break into.

If you decide to order the remote control operator then there is no need to opt for a 4 point locking system as the operator holds the top of the door but the ‘De Latch Security Locking’ is a great device to utilise the manual locking for the retractable gear option in conjunction with the remote control operator by connecting with a mechanical latching system. It will provide a 3 point locking system when added to your door.

If you do not opt for the De Latch system you will have to de commission the manual locking system on the door. For a canopy door the de latch mechanism is not possible with the electric operator, only for the retractable mechanism.

Emergency External Release
This is a cable attachment system internally for providing an external method of disconnecting the remote control operator towing arm for the garage door in the event of a power failure and when you do not have another way of accessing the garage.

Retractable PLUS gear
Only an option if you choose the retractable mechanism on the door. This is a clever cranked arm system to provide a wider drive through width when the door is open by raising the height of the lifting arms either side of the door. It will only provide a wider drive through width for most cars and not 4x4 vehicles. Please check for exact dimensions or ask for clarification depending on the door height chosen.

Remote Control Electric Operator
We offer the very best options for the door models within our online shop and with the Hormann up and over doors it is either the Promatic or Supramatic models with the Supramatic having more power and more options and accessories available.

Either model is a Bi Secur system meaning the very latest in 2 way communication and also encrypted remote signalling for the best security possible.

Either operator comes complete with 2 hand held transmitters as standard and an internal manual release mechanism. Both operators also offer a courtesy light integrated into the motor head for light when the door is operated and a power off after a timed period.

Fittings and Locking

The 2602 Finesse comes fitted with an ergonomic black nylon exterior handle and a manual release turn disc on the interior. The lock operates an adjustable 2 point mechanical latching system using spring loaded rotary catches that engage firmly into the side frame legs. An optional 4 point locking kit can be added to introduce additional top locking points for greater physical resistance.

*Alternative diecast handle upgrades in brushed stainless steel, chrome, and brass finishes are available if you want to match your home's exterior door furniture.

Electric Automation Options

The 2602 Finesse pairs seamlessly with the Hormann ProMatic and Hormann SupraMatic ceiling mounted electric operators:

• BiSecur Technology: Supplied with 2 micro hand transmitters operating on Hormann's 128 bit encrypted 868 MHz BiSecur frequency, preventing code copying or electronic cloning.
• Safety and Soft Operation: Integrated automatic obstacle reversal stops and reverses the door if it meets an obstruction, while soft start and soft stop reduce mechanical stress on the door panel and springs.
• De-Latch Locking Kit: When fitting an electric operator, we recommend adding a Hormann de-latch kit. This connects the door's lower mechanical rotary latches to the operator boom, ensuring the door remains physically locked into the side frames as well as held by the motor carriage.
• External Emergency Release: If your garage does not have a separate pedestrian side door or internal connecting door, an external release device is essential to let you disengage the motor with a key during a power cut.

*Note on Automation: Retractable gear connects straight to an electric boom operator. Canopy doors require an additional canopy bow arm converter bracket to automate.

Installation Positions

• Behind the Reveal (Internal Face Fix): The sub frame fixes directly to the inside face of the brick piers. This is the recommended fitting method if you have at least 75mm of side room and 75mm of lintel headroom, as it keeps your full structural drive-through width and height clear.
• Between the Reveal (In-between Fix): The door and sub frame sit within the brick opening itself. Essential if your garage has flush walls with no internal piers, though the frame legs will reduce the drive-through width by roughly 120mm to 150mm in total.

*A level concrete floor across the garage entrance ensures the bottom synthetic rubber weatherstrip seals cleanly against draughts, driving rain, and leaves.

Full installation details are provided with the door as well as various components for installing the optional steel fixing frame if ordered. Steel brackets and screws are provided for the fixing frame or timber screws for a timber fixing frame installation - you will only need fixings for installing the steel brackets to your structural opening. All Hormann garage doors are delivered with your chosen operating mechanism factory installed to the door panel and the only item to fix after installing the door is the handle set supplied seperately with the door. The spring is already tensioned on the canopy doors and released by removing a transit screw once the door is installed.

Installation instructions are available to download: Horman retractable installation instructions.pdf  or Horman canopy installation instructions.pdf

Warranty

Hörmann products are manufactured to the highest quality standards and leave our factory only after rigorous quality testing. However, if you should have grounds for complaint, this section tells you what our door warranty offers, and how to go about making your claim.

In the unlikely event of a warranty claim becoming necessary, please contact the dealer or distributor who originally supplied your garage door. Your dealer should then supply details of the claim, together with a copy of the warranty card provided with the door and proof of purchase to the Product Services Department at Hörmann (UK) Ltd. To enable your claim under warranty to be processed as quickly as possible, you should provide the following details:

1 Your name, address and telephone number

2 Original invoice with date of purchase

3 Product description/door type and product number

4 Description of defect

An assessment of the claim will then be made. This may require Hörmann to inspect the product in-situ. In the event that there is no legitimate warranty claim under the terms specified herein, you may be liable for the costs of the inspection visit. We strongly recommend that you take note of the care and usage instructions displayed on the stickers on the back of your garage door, and on the page opposite, and that you follow these instructions throughout.

Hörmann (UK) Ltd Garage Door Warranty

Warranty Period The purchaser is granted a warranty covering the safe and reliable function of the Hörmann garage door for a period of 10 years from the date of purchase. A 5 year warranty applies to springs, wire cables, track rollers, hinges and guide rollers. The warranty period for replacement parts is 6 months or to the end of the current warranty period, whichever is longer. In the case of foilcoated timber-effect, a warranty of 5 years is granted, for timber and GRP doors a warranty of 2 years is granted on the door panels alone under the terms and conditions specified herein. The door mechanism and steel frame (if applicable) is covered by the 10 year warranty period.

Requirements 

Warranty claims are only applicable in the country where the garage door was purchased. The product must have been purchased through our authorised distribution channels. The warranty only covers damage to the contract object. The fully completed warranty card together with the receipt of purchase correspondingly dated substantiates your right to claim under the warranty.

Performance 

During the warranty period we undertake to rectify any and all defects to the Hörmann product which can be proved to be attributed to a material or manufacturing fault. We pledge at our discretion either to exchange the defective merchandise for faultless merchandise, repair it or allow a reduction in price. We do not accept costs for dismantling and installation nor for carriage.

Replaced parts become our property.

The warranty does not cover damage caused through:

• normal wear and tear

• improper installation

• negligent care and maintenance

• improper initial and subsequent operation

• negligent or wanton destruction

• external influences such as fire, water, salts, alkaline solutions, acids, abnormal environmental influences

• mechanical damage through improper transport and fitting

• priming and other surface protection treatments

• incorrect or too late applied surface protection treatments

• repair by non-qualified persons

• using non-Hörmann parts without the approval of the manufacturer

• removal of the product number or making it unidentifiable

Electric Operator Warranty

A separate 5 year warranty is granted on our electric operators. This includes operator mechanics, motor and motor control systems. A 2 year warranty is granted on radio equipment, accessories and system controls. There is no warranty on consumables (e.g. fuses, batteries, bulbs etc.).

User Information/Care

Finish - Steel Doors

The coating process applied to the door and chassis is environmentally friendly. Minor scratches or marks are not covered under the conditions of our warranty and should be repaired immediately to prevent corrosion and deterioration of the panel. Corrosive substances such as acids, alkalines, and salts, etc. should be cleaned from the door immediately; failure to do so will result in deterioration of the finish, which will not be covered under our warranty. Should deterioration of the finish start to occur you will need to repaint your door immediately. Prepare the surface lightly with wet and dry. Then treat with solvent based 2 pack epoxy wash primer and a normal commercial paint (cellulose paint must not be used). Hörmann steel doors are a finished product. They do not require re-painting on site. They are however not immune to damage, which can occur at any stage of the handling of the product from factory to site.

Finish - Timber Doors

Timber panels are coated with a neutralising base-stain. Doors must be stored upright, under cover, with wrapping intact, until wrapping is removed. As soon as the door is unwrapped, one coat of a good quality basecoat primer must be applied to both sides of the door. Immediately after installation, your timber doors require a further two coats of a good quality exterior wood finish on both sides. Initial application and periodic treatment should be carried out strictly in accordance with the woodstain manufacturer's instructions. Failure to follow these instructions will result in early deterioration of the timber panel.

Finish - GRP Doors

GRP door panels should periodically washed down using water. This should be done more frequently if fitted near the sea. Bird droppings will bleach the finish on GRP. and should be removed using water as soon as possible. GRP doors should not be painted over.

Paint Finish - Steel Doors

Minor surface damage can easily be repaired using touch up sprays or sticks without invalidating warranties.

Safe Operating and Maintenance of Hormann Garage Doors PDF >