Hormann NT60 L Ribbed Horizontal Sandgrain (15 Colour Options) garage door Steel Hormann

01926 463 888

Hormann NT60 L Ribbed Horizontal Sandgrain (15 Colour Options) Steel Side Hinged - insulated
Hormann Look at our customer reviews on trustpliot
Side Hinged - insulated Steel GEAR TYPE: Side Hinged

The Hormann NT60 side hinged doors are insulated with a double-leaf aluminium frame and have 42mm thick panel infills.

The NT60 comes as a partially fitted door set. The frame can be easily assembled and fitted on-site.

Choose Your Sizes
Web Price from: £2,816.40 Inc. VAT
£2,347.00 Ex. VAT

Hormann NT60 Side Hinged doors are designed to match perfectly with Hormann Sectional Doors and Hormann NT60 Pedestrian Doors, and can be requested to match the alignment of your sectional garage door. Made with the same Steel double-skinned, 42 mm PU-foamed infill panels as used in the Hormann Sectional range, these Side Hinged doors are built to the reliably high standards of quality and longevity delivered by Hormann.

Colour options:

Ochre Brown RAL 8001
Light Ivory RAL 1015
Window Grey RAL 7040
Grey Aluminium RAL 9007
Stone Grey RAL 7030
Pigeon Blue RAL 5014
Steel Blue RAL 5011
Anthracite Grey RAL 7016
White Aluminium RAL 9006
Terra Brown RAL 8028
Moss Green RAL 6005
Ruby Red RAL 3003
Light Grey RAL 7035
Fir Green RAL 6009
Clay Brown RAL 8003

Domestic or Commercial use.


These doors come with a block frame. The profiles are aluminium infilled with steel double-skinned, PU-foamed panels. To be fitted inbetween the opening, opening outwards.


NT 60-2: 3 two-part hinges, for garage doors in RAL 9016: white.

For garage doors in colour and RAL to choose: Cast aluminium, natural finish (F1)

Garage doors with Decograin surface finish: Hinges in a matching colour

Concealed Hinges

Available as an optional extra, please note:  Version in RC2 and triple locking not possible.  Overhead door closure not possible.  Not possible for corner frame.  Please contact us should you require any assistance. 

Lever handle

NT 60-2: For garage doors in RAL 9016 and Decograin surface finish:

Plastic lever handle set, black

For garage doors in colour and RAL to choose: Cast aluminium lever handle set, natural finish (F1)

Standard equipment

Double-leaf garage door for fitting in the opening, opening outwards

Leaf frame and door frame

Aluminium profiles, depth 60 mm

Door infill

Double-skinned, PU-foamed steel sections, depth 42 mm

Door infill surface finish

Exterior: Woodgrain, Sandgrain, Silkgrain and Decograin*

Interior: Stucco-textured, RAL 9002

Standard colour:

Frame, leaf profile and infill: Traffic white, RAL 9016

Interior infill: Grey white, RAL 9002

Size range

Up to 2500 × 2558 mm (RAM)


Mortice lock 1314


Hörmann products are manufactured to the highest quality standards and leave our factory only after rigorous quality testing. However, if you should have grounds for complaint, this section tells you what our door warranty offers, and how to go about making your claim.

In the unlikely event of a warranty claim becoming necessary, please contact the dealer or distributor who originally supplied your garage door. Your dealer should then supply details of the claim, together with a copy of the warranty card provided with the door and proof of purchase to the Product Services Department at Hörmann (UK) Ltd. To enable your claim under warranty to be processed as quickly as possible, you should provide the following details:

1 Your name, address and telephone number

2 Original invoice with date of purchase

3 Product description/door type and product number

4 Description of defect

An assessment of the claim will then be made. This may require Hörmann to inspect the product in-situ. In the event that there is no legitimate warranty claim under the terms specified herein, you may be liable for the costs of the inspection visit. We strongly recommend that you take note of the care and usage instructions displayed on the stickers on the back of your garage door, and on the page opposite, and that you follow these instructions throughout.

Hörmann (UK) Ltd Garage Door Warranty

Warranty Period The purchaser is granted a warranty covering the safe and reliable function of the Hörmann garage door for a period of 10 years from the date of purchase. A 5 year warranty applies to springs, wire cables, track rollers, hinges and guide rollers. The warranty period for replacement parts is 6 months or to the end of the current warranty period, whichever is longer. In the case of foilcoated timber-effect, a warranty of 5 years is granted, for timber and GRP doors a warranty of 2 years is granted on the door panels alone under the terms and conditions specified herein. The door mechanism and steel frame (if applicable) is covered by the 10 year warranty period.


Warranty claims are only applicable in the country where the garage door was purchased. The product must have been purchased through our authorised distribution channels. The warranty only covers damage to the contract object. The fully completed warranty card together with the receipt of purchase correspondingly dated substantiates your right to claim under the warranty.


During the warranty period we undertake to rectify any and all defects to the Hörmann product which can be proved to be attributed to a material or manufacturing fault. We pledge at our discretion either to exchange the defective merchandise for faultless merchandise, repair it or allow a reduction in price. We do not accept costs for dismantling and installation nor for carriage.

Replaced parts become our property.

The warranty does not cover damage caused through:

• normal wear and tear

• improper installation

• negligent care and maintenance

• improper initial and subsequent operation

• negligent or wanton destruction

• external influences such as fire, water, salts, alkaline solutions, acids, abnormal environmental influences

• mechanical damage through improper transport and fitting

• priming and other surface protection treatments

• incorrect or too late applied surface protection treatments

• repair by non-qualified persons

• using non-Hörmann parts without the approval of the manufacturer

• removal of the product number or making it unidentifiable

Electric Operator Warranty

A separate 5 year warranty is granted on our electric operators. This includes operator mechanics, motor and motor control systems. A 2 year warranty is granted on radio equipment, accessories and system controls. There is no warranty on consumables (e.g. fuses, batteries, bulbs etc.).

User Information/Care

Finish - Steel Doors

The coating process applied to the door and chassis is environmentally friendly. Minor scratches or marks are not covered under the conditions of our warranty and should be repaired immediately to prevent corrosion and deterioration of the panel. Corrosive substances such as acids, alkalines, and salts, etc. should be cleaned from the door immediately; failure to do so will result in deterioration of the finish, which will not be covered under our warranty. Should deterioration of the finish start to occur you will need to repaint your door immediately. Prepare the surface lightly with wet and dry. Then treat with solvent based 2 pack epoxy wash primer and a normal commercial paint (cellulose paint must not be used). Hörmann steel doors are a finished product. They do not require re-painting on site. They are however not immune to damage, which can occur at any stage of the handling of the product from factory to site.

Finish - Timber Doors

Timber panels are coated with a neutralising base-stain. Doors must be stored upright, under cover, with wrapping intact, until wrapping is removed. As soon as the door is unwrapped, one coat of a good quality basecoat primer must be applied to both sides of the door. Immediately after installation, your timber doors require a further two coats of a good quality exterior wood finish on both sides. Initial application and periodic treatment should be carried out strictly in accordance with the woodstain manufacturer's instructions. Failure to follow these instructions will result in early deterioration of the timber panel.

Finish - GRP Doors

GRP door panels should periodically washed down using water. This should be done more frequently if fitted near the sea. Bird droppings will bleach the finish on GRP. and should be removed using water as soon as possible. GRP doors should not be painted over.

Paint Finish - Steel Doors

Minor surface damage can easily be repaired using touch up sprays or sticks without invalidating warranties.

Safe Operating and Maintenance of Hormann Garage Doors PDF >

Hormann Side Hinged Measuring

A: Fitted correctly in the opening these insulated side hinged garage doors are very good for heat, cold and sound insulation with weathersealing comb

(read more)
Monday 11th March 2013 at 12:00am
A: Hormann, Carteck, Garador and SWS Sectional Doors are available in Any RAL Colour. If you require a door in a certain RAL Colour, please ask to se

(read more)
Thursday 15th December 2011 at 12:00am
A: They are always delivered by either the manufacturer or ourselves in specialised transport vehicles. The smaller items such as the remote control o

(read more)
Wednesday 28th September 2011 at 12:00am
A: Most doors and electric operators are supplied with full printed installation instructions. Many PDF installation instructions can also be found

(read more)
Monday 5th September 2011 at 12:00am
View all in the Side Hinged - insulated range >
Our Promise

We pride ourselves on our customer service and are always happy to help

We use cookies to provide you with a better website experience. Close this popup to carry on browsing, or click here to find out more about cookies