Garador Horizontal Cedar with Hormann Promatic Electric Operator & Swing Door Kit
Base Coat Stain
This online offer is for a Garador Timber Side Hinged Electric garage door package.
All of the Garador side hinged timber doors are factory pre-framed as standard for ease of installation.
The steel fixing sub frame is factory finished in a dark brown powdercoat finish.
The Garador Side Hinged Doors are only available as 1/3 - 2/3 split up to 2234mm overall frame width.
These doors are supplied with hinges, locks and handles already pre-fitted:
> Right hand leading door leaf (as viewed from outside).
> Black Lever/lever handle set.
> Base coat stained.
Please Note: If there is no other access into your garage then a manual release will need to be ordered in case of power failure!
The Hormann Promatic E Operator comes as standard with 2 No 2-button micro hand transmitters (HSE 2 BS) in Black (868 MHz).
Integrated Receiver (868 MHz) - Bi-directional receiver BS.
Control Buttons - Control buttons in the operator cover.
Hormann Promatic with BiSecur Technology - Operator Data:
Motor - 24 V DC gear drive
Mains Voltage - 230 V - 240 V AC
Power Input - 0.2 kW
Pull and Push Force - 600N
Peak Force - 750N
Opening Speed - Approx. 14cm/s
Standby - < 7 watts
Housing - Plastic, galvanised steel base plate
Temperature Range - - 20°C to + 60°C
Protection Category - Only for dry rooms
Swing Door Kit
The Hinged Door Fitting Kit and Guide Rail allows the timber side hinged doors to be automated (only if the doors open outwards).
The swing arms attach to the door leaves around 1 1/2 inches below the top of the leaf so the arms sit just below the door stays. They attach to the operator trolley that runs along the boom, pushing and pulling the door leaves open.
Please note that headroom will be reduced by approx 4" due to the electric operator.
Finish – Timber Doors
The purchaser is granted a warranty covering the safe and reliable function of the Garador garage door for a period of 10 years from the date of purchase.The warranty period for replacement
parts is 6 months or to the end of the current warranty period, whichever is longer.
In the case of foil-coated timber-effect doors, a warranty of 5 years is granted, for timber and GRP doors a warranty of 2 years is granted on the door panels alone under the terms and conditions specified herein.The door mechanism and steel frame (if applicable) is covered by the 10 year warranty period.
Warranty claims are only applicable in the country where the garage door was purchased. The product must have been purchased through our authorised distribution channels.
The warranty only covers damage to the contract object. The fully completed warranty card together with the receipt of purchase
correspondingly dated substantiates your right to claim under the warranty. Garador products are manufactured to the highest quality standards and leave our factory only after rigorous quality testing. However, if you should have grounds for complaint, this section tells you what our door warranty offers and how to go about making your claim.
During the warranty period we undertake to rectify any and all defects to the Garador product which can be proved to be attributed to a material or manufacturing fault. We pledge at our discretion either to exchange the defective merchandise for faultless merchandise, repair it or allow a reduction in price. We do not accept costs for dismantling and installation nor for carriage.
Replaced parts become our property.
The warranty does not cover damage caused through:
• normal wear and tear
• improper installation
• negligent care and maintenance
• improper initial and subsequent operation
• negligent or wanton destruction
• external influences such as fire, water, salts, alkaline solutions, acids, abnormal environmental influences
• mechanical damage through improper transport and fitting
• priming and other surface protection treatments
• incorrect or too late applied surface protection treatments
• repair by non-qualified persons
• using non-Garador parts without the approval of the manufacturer
• removal of the product number or making it unidentifiable
The order sizes refer to the nearest imperial inside dimensions of the steel sub frame and you simply add 100mm to the width and 60mm to the height for the overall frame dimensions. i.e. 8' x 7' door size is 2438 plus 100mm and 2134 plus 60mm to give overall frame dimensions of 2539 x 2194.