This product is available to order by phone. Call 01926 463 888 and our team will help with sizing and pricing.
The Seceuroglide Insulated Sectional Door design makes the most of the space both inside and outside of the garage, by rising vertically allowing you to park right up to the door. Manufactured in the UK, the quality, value, ease of use and fast leading times make these sectional doors an outstanding choice.
Easiest installation with the Elite side spring system as standard up to 5.5m wide and every door manufactured to the exact milimetre as standard for you.
Please note: panel configuration may vary from online images shown depending upon height of door. We strongly advise that you check a mock up diagram prior to the door going into production.
- Made to Measure Sizes at no extra cost
- Insulated 40mm double skinned panels
- Simple side spring assembly
- Easy DIY installation
The Seceuroglide Sectional Garage Door creates a stylish feature that is sure to enhance the look of your home but also the security and insulation. The Centre Ribbed sectional garage door by Seceuroglide is a timeless design that can be styled many different ways. The diverse range of available finishes mean this ribbed design could fit in with a very modern garage, or it could be styled in a traditional setting, mimicking a timber door.
The Seceuroglide sectional garage door has a 40mm thick insulated steel panel manufactured to the highest specification, filled with PU foam - this along with the high grade rubber weather seals on all sides ensures a very high level of insulation, meaning an energy efficient and money saving door. This also goes hand-in-hand with security - the thick panels and the sophisticated locking system ensures peace of mind for you and your whole family. Whether you have a manual or an automated door you will be totally protected from intruders.
The Sectional garage door design makes the most of your driveway and garage; vertical operation ensures you can park right up to your door on either side and use your entire driveway.
There are two free of charge standard finishes; a traditional style White woodgrain embossed finish, or a smooth and modern Anthracite Dura finish. Additionally, there is a huge range of 32 different optional standard colour finishes, including Heritage and Metallic colours, and the Centre Ribbed design can also be manufactured in a Medium Oak foiled finish. With this range of choices, there will be something to suit every garage.
Handles
This door is not designed for manual operation and does not come with a handle, regardless of if a motor is selected or not.
The inbetween installation kit uses the Executive framing kit as standard, this is a 100mm wide aluminium box section frame on 2 sides and reduces the structural opening width by at least 200mm on the width as well as either 100 or 130mm on the height - this gives the ordering dimensions. A tolerance should always be allowed for in these calculations and we recommend between 5-10 mm all round.
Width measurements should be taken in 3 places as a minimum and take the smallest measurement as it is inbetween. Take off 10-20mm on the width and then 5-10mm for the height from floor to lintel, again measured in 3 places to work out your ordering sizes.
Please note: panel configuration may vary from online images shown depending upon height of door. We strongly advise that you check a mock up diagram prior to the door going into production.
The Seceuroglide Elite Sectional Doors are suitable for openings up to 5 metres wide: 
Manual or electric operation
Minimum side room required: 85mm
Actual drive through height (manual): DOH - 230mm
Actual drive through height (electric): DOH - 20mm
Minimum head room required (manual): 100mm
Minimum head room required (electric): 130mm
Installation Instructions are provided with every door.
Elite Fitting Instructions PDF >
All Seceuroglide products are guaranteed against defect of material or workmanship by SWS UK subject to correct installation, maintenance and operation for a period of 2 years from the date of purchase.
In addition Medium Oak textured woodgrain finishes carry a limited 10 year guarantee.
The inbetween installation kit uses the Executive framing kit as standard, this is a 100mm wide aluminium box section frame on 2 sides and reduces the structural opening width by at least 200mm on the width as well as either 100 or 130mm on the height - this gives the ordering dimensions. A tolerance should always be allowed for in these calculations and we recommend between 5-10 mm all round.
Width measurements should be taken in 3 places as a minimum and take the smallest measurement as it is inbetween. Take off 10-20mm on the width and then 5-10mm for the height from floor to lintel, again measured in 3 places to work out your ordering sizes.
Our Promise
We pride ourselves on our customer service and are always happy to help