Using the most popular and durable size of double walled aluminium insulated slats, this roller garage door is a robust, high quality design and uses an electric remote control system complete with safety detection in the bottom leading edge slat on the door.
This is our most popular remote control electric roller garage door as it uses the best combination of everything for a high quality, easy to assemble door with a 3 year warranty as standard.
- 2 year Warranty as standard
- Made to Measure size as standard
- Suitable for inside face or inbetween fitting
- 21 on-trend colours to choose
NEW from GDO, this electric aluminium roller garage door is purpose made to the millimetre and is supplied as standard with remote control operation.
This is one of our most popular roller garage doors with high quality components and a 2 year warranty. The very best value for money electric aluminium roller door.
2 handsets and an internal wall mounted control panel are standard, along with leading safety edge detection for preventing closure onto any obstacles and full compliance with UK regulations on the use of electric operated doors with remote operation.
Using 77mm double skinned aluminium slats this roller garage door is strong and offers good insulation in the mix too.
Made to measure sizes up to a maximum width of 5200mm including the guides either side.
Maximum height available is 2900mm, plus the height of the roll and endplates which is 300mm
The aluminium side guides are either 70mm or 90mm wide, depending on the door width ordered.
Doors over 3000mm wide will have 90mm guides as standard so the clear opening width will be 180mm less than the Ordering Width.
The door curtain is available in 3 very popular standard high quality finish colours with a choice of white, black or anthracite guides and hood when ordered, but also available in a further 18 premium colours for a small surcharge.
The door also has an internal manual winding handle system to operate in the event of a power failure. Optional low level manual override is available if you do not have another access door into your garage.This full hood cover model provides the ultimate protection at all times with the curtain roll and mechanism enclosed in an aluminium 4 sides hood which is available in 3 standard colours or the same colour as the curtain choice for additional cost.
The hood cover is fitted to the endplates on either side of the roller barrel which the curtain rolls around.
Domestic roller garage door for medium duty useage. Lighter commercial applications with minimal daily operations.
The GDO ROLL 77 is constructed from high quality 77mm deep double skinned aluminium slats with a foam filled core. It is a made to measure, electric operated roller garage door as standard, made to the exact millimetre in width and height.
The door is electrically remote operated as standard and incorporates an internal emergency manual release in case of a power failure. This is a winding process using a winding handle provided attaching via a hook to the eye of the motor drive. This can be specified as either on the left or right as viewed from inside the garage.
The door is supplied with 2 remote hansets and an internal wall mounted control panel with inbuilt receiver for the remote controls. The Genesis wall mounted control system dimensions are 140mm h x 120mm w x 50mm d.
The bottom slat is extruded and supplied fitted with a rubber seal system incorporating an infra red beam internally. Any obstacle is detected when the door is operating and the door will instanlty stop to prevent damage or injury.
The curtain of this door rolls around a steel barrel which is supported either side by steel endplates which have a dimension of 300mm x 300mm, which is the headroom required if you wish to hide the roll. Always allow for a maximum 50mm of curtain ‘hang down’ when the door is opened if the opening height is critical to you. This is the same on all roller garage doors.
This is the full hood cover version of the ROLL 77 offering a completely enclosed curtain and barrel for additonal weather protection and an aluminium fascia because you don't have the full headroom required in your garage internally, or you are installing inbetween your structural opening. The full hood ensures the best protection of your door curtain and the best sealing against wind and rain.
 |
 |
 |
 |
 |
| Hand crank | Lined guide | ZF Lock | Barrel | safety brake |
Door guides either side are either 70mm or 90mm wide and 34mm deep and the door is ordered using the ‘OVERGUIDE’ width from the total width of the curtain and guides combined.
The door can be fitted BEHIND or INBETWEEN the structural opening as required, but always check you have ordered the correct dimensions to take into account the guides and endplates (full hood cover if ordered is the same dimensions)
Ordering size is the Over Guide Width (OGW) x Guide Height (GH).
Doors up to 3000mm wide will have 70mm wide guides either side
Clear opening width = Ordering size less 140mm
Clear opening height = Guide height (Ordering size) less 50mm
Doors over 3000mm wide will have 90mm wide guides either side
Clear opening width = Ordering size less 180mm
Clear opening height = Guide height (Ordering size) less 50mm
(to allow for the bottom slat hang-down into the guide when door is open)
Maximum Width including guides is 5200mm
Maximum Height for guides is 2900mm (Total of 3200mm with the endplates and hood) with a maximum width of 4600mm
Standard Colours:
White (RAL 9016)
Anthracite Grey (RAL 7016)
Black (RAL 9005)
Optional Premium Colours:
Brown RAL 8014
Chartwell green
Navy Blue RAL 5011
Burgundy RAL 3004
Light beige BS 08B17
Fir green RAL 6009
Ivory RAL 1015
Agate Grey RAL 7038
Silver Metallic RAL 9006
Dark brown RAL 8019
Moss Green RAL 6005
Cream White RAL 9001
Graphite
Slate Grey RAL 7015
Duck Egg Blue
Irish Oak - painted finish
Golden Oak - painted finish
Rosewood - painted finish
Please note: upon delivery, the accessory box will include a QR code to direct you to the most up-to-date installation instructions.
Ordering size is the Over Guide Width (OGW) x Guide Height (GH).
Doors up to 3000mm wide have 70mm wide guides
Clear opening width = Ordering size + 140mm*
Doors over 3000mm wide have 90mm wide guides
Clear opening width = Odering size + 180mm*
* These measurements are correct for behind fit installations, please contact us for guidance inbetween fit installations.
Clear opening height = guide height - 50mm (to allow for the bottom slat hand-down into the guide).
Overall Height is the guide height plus the endplate size at 300mm
Our Promise
We pride ourselves on our customer service and are always happy to help