The Seceuroglide Sectional Door design makes the most of the space both inside and outside of the garage, by rising vertically allowing you to park right up to the door. The Unribbed design is a sleek and elegant style that will give any garage a modern feel. Manufactured in the UK, the high quality, superb value, ease of installation and use and fast delivery times make these sectional doors an outstanding choice.
When choosing a sectional door, headroom can sometimes be an issue but with the 60mm rear-mount option (ask for details if required), and made to measure sizes as standard with every door, the Seceuroglide sectional doors will fit any garage.
Please note: panel configuration may vary from online images shown depending upon height of door. We strongly advise that you check a mock up diagram prior to the door going into production.
Made to Measure Sizes at no extra cost
Insulated 40mm double skinned panels
Simple side spring assembly
Easy DIY installation
1
Choose Your Sizes
We're ready to help youCall us on 01926 463 888Office Hours: Mon - Fri 8:30 - 17:30
The Seceuroglide Sectional Garage Door creates a stylish feature that is sure to enhance the look of your home but also the security and insulation. The Unribbed sectional garage door by Seceuroglide is a sleek and elegnt design - the smooth panels give the garage an ultra modern feel and the diverse range of available finishes, including metallic colours, means your perfect garage door will be individual to you.
The Seceuroglide sectional garage door has a 40mm thick insulated steel panel manufactured to the highest specification, filled with PU foam - this along with the high grade rubber weather seals on all sides ensures a very high level of insulation, meaning an energy efficient and money saving door. This also goes hand-in-hand with security - the thick panels and the sophisticated locking system ensures peace of mind for you and your whole family. Whether you have a manual or an automated door you will be totally protected from intruders.
The Sectional garage door design makes the most of your driveway and garage; vertical operation ensures you can park right up to your door on either side and use your entire driveway. The Elite requires just 130mm headroom for motorised operation and 100mm for manual operation.
There are two free of charge standard finishes; a traditional style White woodgrain embossed finish, or a smooth and modern Anthracite Dura finish. Additionally, there is a huge range of 32 different optional standard colour finishes, including Heritage and Metallic colours. With this range of choices, there will be something to suit every garage.
Handles This door is not designed for manual operation and does not come with a handle, regardless of if a motor is selected or not.
The inbetween installation kit uses the Executive framing kit as standard, this is a 100mm wide aluminium box section frame on 2 sides and reduces the structural opening width by at least 200mm on the width as well as either 100 or 130mm on the height - this gives the ordering dimensions. A tolerance should always be allowed for in these calculations and we recommend between 5-10 mm all round.
Width measurements should be taken in 3 places as a minimum and take the smallest measurement as it is inbetween. Take off 10-20mm on the width and then 5-10mm for the height from floor to lintel, again measured in 3 places to work out your ordering sizes.
The Seceuroglide Elite Sectional Doors are suitable for openings up to 5 metres wide:
Manual or electric operation
Minimum side room required: 85mm
Actual drive through height (manual): DOH - 230mm
Actual drive through height (electric): DOH - 20mm
Minimum head room required (manual): 100mm
Minimum head room required (electric): 130mm
Please note: panel configuration may vary from online images shown depending upon height of door. We strongly advise that you check a mock up diagram prior to the door going into production.
Installation Instructions are provided with every door.
All Seceuroglide products are guaranteed against defect of material or workmanship by SWS UK subject to correct installation, maintenance and operation for a period of 2 years from the date of purchase.
In addition Medium Oak textured woodgrain finishes carry a limited 10 year guarantee.
The NRG Black Edition electric motor carries a 7 year guarantee*
*7 Year warranty available on the motor if registered.
The inbetween installation kit uses the Executive framing kit as standard, this is a 100mm wide aluminium box section frame on 2 sides and reduces the structural opening width by at least 200mm on the width as well as either 100 or 130mm on the height - this gives the ordering dimensions. A tolerance should always be allowed for in these calculations and we recommend between 5-10 mm all round.
Width measurements should be taken in 3 places as a minimum and take the smallest measurement as it is inbetween. Take off 10-20mm on the width and then 5-10mm for the height from floor to lintel, again measured in 3 places to work out your ordering sizes.
A:
Sectional garage doors are available in a far wider range of sizes,
including purpose made sizes up to 8000mm, so measuring and ordering
is relativ
(read more)
A:
Yes of course and it quite often may be necessary if you do not have
a brick return face to install to....
All sectional and roller garage doors i
(read more)
A:
Yes, this is perfectly possible with many door types and models.
Generally any garage door which is available in a powdercoat finish
will have an o
(read more)
A:
They are always delivered by either the manufacturer or ourselves in
specialised transport vehicles. The smaller items such as the remote
control o
(read more)
A:
Most doors and electric operators are supplied with full printed
installation instructions.
Many PDF installation instructions can also be found
(read more)
Our Promise